Path pattern matching for attribute rules is different than matching
for excluded files.
The first difference concerns patterns without slashes. For
gitattributes those must match on the last component only, not on
any earlier segment. This is true also for directory-only patterns.
The second difference concerns directory-only patterns. Those also
must not match on a prefix or segment except the last one. They do
not apply recursively to all files beneath.
And third, matches only on a prefix must match for gitattributes
only if the last matcher was "/**".
Add a new parameter for such path matching to IMatcher.matches() and
pass it through as appropriate (false for gitignore, true for
gitattributes). As far as gitignore is concerned, there is no change.
New tests have been added, and some existing attribute matching tests
have been fixed since they operated on wrong assumptions.
Bug: 508568
Change-Id: Ie825dc2cac8a85a72a7eeb0abb888f3193d21dd2
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
These tests verify that JGit matches the same as C git, for
both attribute matching (.gitattributes) and file exclusion matching
(.gitignore). These tests work by setting up a test repository and
test rules, and then determine excluded files or attributes both with
JGit and with the native C git, and then compare the results.
For .gitignore tests, we run
git ls-files --ignored --exclude-standard -o
and for attribute tests we use
git check-attr --stdin --all
and pass the list of all files in the repository via stdin.
Change-Id: I5b40946e04ff4a97456be7dffe09374323b7c89d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The Eclipse compiler raises errors for unthrown exceptions declared to
be thrown by test methods introduced in 88e45399.
Change-Id: I0d91c89e1b20ceff52c38b759abf906cc94e9902
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Except for %p and %r and partially %C, we can do token substitutions
as defined by OpenSSH inside the config file parser. %p and %r can
be replaced only if specified in the config; if not, it would be the
caller's responsibility to replace them with values obtained from the
URI to connect to.
Jsch doesn't know about token substitutions at all. By doing the
replacements as good as we can in the config file parser, we can
make Jsch support most of these tokens.
%i is not handled at all as Java has no concept of a "user ID".
Includes unit tests.
Bug: 496170
Change-Id: If9d324090707de5d50c740b0d4455aefa8db46ee
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Ensure the Jsch instance used knows about ~/.ssh/config. This
enables Jsch to honor more user configurations (see
com.jcraft.jsch.Session.applyConfig()), in particular also the
UserKnownHostsFile configuration, or additional identities given
via multiple IdentityFile entries.
Turn JGit's OpenSshConfig into a full parser that can be a
Jsch-compliant ConfigRepository. This avoids a few bugs
in Jsch's OpenSSHConfig and keeps the JGit-facing interface
unchanged. At the same time we can supply a JGit OpenSshConfig
instance as a ConfigRepository to Jsch. And since they'll both
work from the same object, we can also be sure that the parsing
behavior is identical.
The parser does not handle the "Match" and "Include" keys, and it
doesn't do %-token substitutions (yet).
Note that Jsch doesn't handle multi-valued UserKnownHostFile
entries as known by modern OpenSSH.[1]
[1] http://man.openbsd.org/OpenBSD-current/man5/ssh_config.5
Additional tests for new features are provided in OpenSshConfigTest.
Bug: 490939
Change-Id: Ic683bd412fa8c5632142aebba4a07fad4c64c637
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add an update_index to every reference in a reftable, storing the
exact transaction that last modified the reference. This is necessary
to fix some merge race conditions.
Consider updates at T1, T3 are present in two reftables. Compacting
these will create a table with range [T1,T3]. If T2 arrives during
or after the compaction its impossible for readers to know how to
merge the [T1,T3] table with the T2 table.
With an explicit update_index per reference, MergedReftable is able to
individually sort each reference, merging individual entries at T3
from [T1,T3] ahead of identically named entries appearing in T2.
Change-Id: Ie4065d4176a5a0207dcab9696ae05d086e042140
resolve(Ref) helps callers recursively chase symbolic references and
is a useful function when wrapping a Reftable inside a RefDatabase, as
RefCursor does not resolve symbolic references during iteration.
Change-Id: I1ba143f403773497972e225dc92c35ecb989e154
A compaction of reftables is just copying the results of a
MergedReftable into a ReftableWriter. Wrap this up into a utility.
Change-Id: I6f5677d923e9628993a2d8b4b007a9b8662c9045
MergedReftable combines multiple reference tables together in a stack,
allowing higher/later tables to shadow earlier/lower tables. This
forms the basis of a transaction system, where each transaction writes
a new reftable containing only the modified references, and readers
perform a merge on the fly to get the latest value.
Change-Id: Ic2cb750141e8c61a8b2726b2eb95195acb6ddc83
Add additional test cases for looking up entries within a namespace
such as refs/heads/ or refs/tags/, where the seek is passed a name
that ends with '/'.
Change-Id: I5f944de7518cd0090374bddba48d4dd3955a8d72
Add more test cases that cover larger collections of
references, verifying every reference is accessible
both by scan and by seek.
Change-Id: Icada59fdcfc92a4634f6df61baaebb1c37b75d98
This set of tests covers primitive storage of an empty
file, and each type of supported reference.
Change-Id: I3bdff35cae8ae27283051932f20608b3ac353559
Currently there is no way to determine the precise changes done
to the working tree by a JGit command. Only the CheckoutCommand
actually provides access to the lists of modified, deleted, and
to-be-deleted files, but those lists may be inaccurate (since they
are determined up-front before the working tree is modified) if
the actual checkout then fails halfway through. Moreover, other
JGit commands that modify the working tree do not offer any way to
figure out which files were changed.
This poses problems for EGit, which may need to refresh parts of the
Eclipse workspace when JGit has done java.io file operations.
Provide the foundations for better file change tracking: the working
tree is modified exclusively in DirCacheCheckout. Make it emit a new
type of RepositoryEvent that lists all files that were modified or
deleted, even if the checkout failed halfway through. We update the
'updated' and 'removed' lists determined up-front in case of file
system problems to reflect the actual state of changes made.
EGit thus can register a listener for these events and then knows
exactly which parts of the Eclipse workspace may need to be refreshed.
Two commands manage checking out individual DirCacheEntries themselves:
checkout specific paths, and applying a stash with untracked files.
Make those two also emit such a new WorkingTreeModifiedEvent.
Furthermore, merges may modify files, and clean, rm, and stash create
may delete files.
CQ: 13969
Bug: 500106
Change-Id: I7a100aee315791fa1201f43bbad61fbae60b35cb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When creating a new PackFile instance it is specified whether this pack
has an associated bitmap index file or not. This information is cached
and the public method getBitmapIndex() will always assume a bitmap index
file must exist if the cached data tells so. But it may happen that the
packfiles are repacked during a gc in a different process causing the
packfile, bitmap-index and index file to be deleted. Since JGit still
has an open FileHandle on the packfile this file is not really deleted
and can still be accessed. But index and bitmap index file are deleted.
Fix getBitmapIndex() to invalidate the cached packfile instance if such
a situation occurs.
This problem showed up when a gerrit server was serving repositories
which where garbage collected with native git regularly. Fetch and
clone commands for certain repositories failed permanently after a
native git gc had deleted old bitmap index files.
Change-Id: I8e620bec74dd3f310ba42024f9a657062f868f0e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Per the git config documentation[1], pushInsteadOf is ignored when
a remote has explicit pushUris.
Implement this, and adapt tests.
Up to now JGit mistakenly applied pushInsteadOf also to existing
pushUris. If some repositories had relied on this mis-feature,
pushes may newly suddenly fail (the uncritical case; the config
just needs to be fixed) or even still succeed but push to unexpected
places, namely to the non-rewritten pushUrls (the critical case).
The release notes should point out this change.
[1] https://git-scm.com/docs/git-config
Bug: 393170
Change-Id: I38c83204d2ac74f88f3d22d0550bf5ff7ee86daf
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
According to [1], pushInsteadOf is
1. applied to the uris, not to the pushUris
2. ignored if a remote has an explicit pushUri
JGit applied it only to the pushUris. As a result, pushInsteadOf was
ignored for remotes having only a uri, but no pushUri.
This commit implements (1) if there are no pushUris. I did not dare
implement (2) because:
* there are explicit tests for it that expect that pushInsteadOf gets
applied to existing pushUrls, and
* people may actually use and rely on this JGit behavior.
[1] https://git-scm.com/docs/git-config
Bug: 393170
Change-Id: I6dacbf1768a105190c2a8c5272e7880c1c9c943a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This matches the proposal that has been discussed at length on
git-core mailing list and seems to be the accepted convention.
Change-Id: I9f6ab15144826893d1e2a4b48a2d657d6dd445ec
Otherwise fancy combinations of attributes (binary or -text in
combination with crlf or eol) may result in the corruption of binary
data.
Bug: 520910
Change-Id: I3ffc666c13d1b9d2ed987b69a67bfc7f42ccdbfc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Attribute rules must match against the entry path relative to the
attribute node containing the rule. The global entry path is to be
used only for the init and the global node (and of course the root
node).
Bug: 520677
Change-Id: I80389a2dc272a72312729ccd5358d7c75e1ea20a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This avoids executing mergeAlgorithm.merge on binary data, which is
unlikely to be useful.
Arguably, binary data should not make it to
ResolveMerger#contentMerge, but this approach has the following
advantages:
* binary detection is exact, since it doesn't only look at the start
of the blob.
* it is cheap, as we have to iterate over the bytes anyway to find
'\n'.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: I424295df1dc60a719859d9d7c599067891b15792
Very short abbreviations that are under 8 hex digits do not
have values in w2. Use w1 as the Java hashCode() instead, so
that the prefix of the abbreviation is always included in the
hashing function used by any java.util.Collection type.
Change-Id: Idaf69f86b62630ba4a022d31b4c293c6d138f557
In a server scenario such as Gerrit Code Review, there may be many
atomic BatchRefUpdates contending for locks on both the packed-refs file
and some subset of loose refs. We already retry lock acquisition to
improve this situation slightly, but we can do better by using an
in-process lock. This way, instead of retrying and potentially exceeding
their timeout, different threads sharing the same Repository instance
can wait on a fair lock without having to touch the disk lock. Since a
server is probably already using RepositoryCache anyway, there is a high
likelihood of reusing the Repository instance.
Change-Id: If5dd1dc58f0ce62f26131fd5965a0e21a80e8bd3
If a repo frequently uses PackedBatchRefUpdates, there is likely to be
contention on the packed-refs file, so it's not appropriate to fail
immediately the first time we fail to acquire a lock. Add some logic to
RefDirectory to support general retrying of lock acquisition.
Currently, there is a hard-coded wait starting at 100ms and backing off
exponentially to 1600ms, for about 3s of total wait. This is no worse
than the hard-coded backoff that JGit does elsewhere, e.g. in
FileUtils#delete. One can imagine a scheme that uses per-repository
configuration of backoff, and the current interface would support this
without changing any callers.
Change-Id: I4764e11270d9336882483eb698f67a78a401c251
Make sure all objects referenced by references are reachable. Stop at
the first missing object.
Change-Id: Ifcd7392c4321b17d9290bd87f038bc62bc10dabb
Signed-off-by: Zhen Chen <czhen@google.com>
JGit already had some fsck-like classes like ObjectChecker which can
check for an individual object.
The read-only FsckPackParser which will parse all objects within a pack
file and check it with ObjectChecker. It will also check the pack index
file against the object information from the pack parser.
Change-Id: Ifd8e0d28eb68ff0b8edd2b51b2fa3a50a544c855
Signed-off-by: Zhen Chen <czhen@google.com>
On-disk reflogs are not stored in the packed-refs file, so we cannot
ensure atomic updates. We choose the lesser evil of dropping failed
reflog updates on the floor, rather than throwing an exception even
though the underlying ref updates succeeded.
Add tests for reflogs to BatchRefUpdateTest.
Change-Id: Ia456ba9e36af8e01fde81b19af46a72378e614cd
* Factor out helpers for setting up and executing updates.
* Use common assert methods, with a special enum type that papers over
the fact that there is no ReceiveCommand.Result for transaction
aborted.
* Static import ReceiveCommand.Type constants.
* Add blank lines to separate repo setup, update execution, and asserts.
Change-Id: Ic3717f94331abfc7ae3e92065f3fe32026bf7cea
Run with @Parameterized, so we don't have to duplicate test setup for
each atomic/non-atomic test. We still have to have two different sets of
asserts for the cases where the behavior is different. In fact, this is
a readability win: it emphasizes that performing the exact same setup
except for the atomic setting will have different behavior.
Change-Id: I78a8214075e204732a423341f14c09de273a7854
The existing packed-refs file provides a mechanism for implementing
atomic multi-ref updates without any changes to the on-disk format or
lockfile protocol. We just need to make sure that there are no loose
refs involved in the transaction, which we can achieve by packing the
refs while holding locks on all loose refs. Full details of the
algorithm are in the PackedBatchRefUpdate javadoc.
This change does not implement reflog support, which will come in a
later change.
Change-Id: I09829544a0d4e8dbb141d28c748c3b96ef66fee1
ReceiveCommand.Result has a slightly richer set of possibilities, so it
makes sense for RefUpdate.Result to have more values in order to match.
In particular, this allows us to return REJECTED_MISSING_OBJECT from
RefUpdate when an object is missing.
The comment in RefUpdate#safeParse about expecting some old objects to be
missing is only applicable to the old ID, not the new ID. A missing new
ID is a bug or programmer error, and we should not update a ref to point
to one.
Fix various tests that started failing because they depended for no good
reason on setting refs to point to nonexistent objects; it's always easy
to create a real object when necessary.
It is possible that some downstream users of RefUpdate.Result might
choose to handle one of the new statuses differently, for example by
providing a more user-readable error message; that is not done in this
change.
Change-Id: I734b1c32d5404752447d9e20329471436ffe05fc
Fix patch matching for patterns of form a/b/** : this should not match
paths like a/b but still match a/b/ and a/b/c.
Change-Id: Iacbf496a43f01312e7d9052f29c3f9c33807c85d
Signed-off-by: Dmitry Pavlenko <pavlenko@tmatesoft.com>
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Thomas Wolf
Matthias Sohn
Joan Goyeau
Shawn Pearce
David Pursehouse
Christian Halstrick
Han-Wen Nienhuys
Dave Borowitz
Zhen Chen
Dmitry Pavlenko