In Git protocol v2, UploadPack and ReceivePack have the same
capabilities and can process any protocol v2 request. For example, a
client can sent a "fetch" command to the "/git-receive-pack" endpoint.
This makes it difficult for existing hook interfaces. For example,
PreUploadHook takes UploadPack, but a "fetch" command may be received by
ReceivePack.
To resolve this skew, this change introduce a different hook interface
for the protocol v2. The hook takes a request that is independent to the
handlers (UploadPack, ReceivePack). Also this makes it clear what
parameters the hook is counting on, instead of keep track of the hook
using getters from UploadPack / ReceivePack.
Bug: 534847
Change-Id: I71f3266584483db1e2b2edfc1a72d0bdf1bb6041
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
This avoids that we have to suppress API errors whenever we add a new
constant in a minor release. This change affects implementors only which
is ok to do in a minor release following OSGi semantic versioning rules.
Change-Id: Iece841886fbe00f1ba567c5ff68093c542ba265e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When fetching with protocol v2, git expects the shallow-info section to
appear before wanted-refs if both appear in the response. Teach
UploadPack to do this.
Change-Id: Ie26a91edcce5d27a1d727d7fba5c30e1144e118b
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
This eliminates one source of unpredictable ordering of entries in .gitmodules.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: I834ae57bd18f51966ef76c039f5212ebf60a33e8
ResolveMerger.checkout() and cleanUp() check out files directly and
must honor CR/LF settings and also smudge filters.
Deprecate the 3-argument version of DirCacheCheckout.checkoutEntry().
It isn't used anymore anywhere in JGit (nor in EGit).
Bug: 537410
Change-Id: I062b35401c8bd5bc99deb2f68f91089a0643504c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
UploadPack already allows the client to send wanted OIDs as "want"
lines. Extend UploadPack to also allow the client to send wanted ref
names as "want-ref" lines when the fetch is done using protocol v2.
The corresponding Git commit is 516e2b76bd ("upload-pack: implement
ref-in-want", 2018-06-28).
To support a two-stage rollout, two configuration variables are
provided: uploadpack.allowrefinwant (default "false") allows clients to
specify "want-ref" in their requests, and uploadpack.advertiserefinwant
(default "true") makes UploadPack advertise this capability. If
uploadpack.allowrefinwant is true but uploadpack.advertiserefinwant is
false, UploadPack will not advertise that it supports "want-ref", but it
will support it.
Change-Id: I3c24077949640d453af90d81a7f48ce4b8ac9833
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Without these registrations, JSch's up-front checks which algorithms
are available at all fail if the ssh config explicitly sets only these
algorithms.
Bug: 537790
Change-Id: Idb0431190a7f101913363ee95af6c8fcbda6c923
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Use org.eclipse.jgit.errors.CancelledException which is a subclass of
IOException instead of org.eclipse.jgit.api.errors.CanceledException in
order to avoid breaking API. We can reconsider this with the next major
version 6.0.
Bug: 536324
Change-Id: Ia6f84f59aa6b7d78b8fccaba24ade320a54f7458
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If progress monitor is cancelled break loops in rename detection by
throwing a CanceledException.
Bug: 536324
Change-Id: Ia3511fb749d2a5d45005e72c156b874ab7a0da26
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It's easier to read a list of cases
case A:
case B:
case C:
... do something ...;
break;
without intervening "// fall through" lines separating the cases.
This also makes it clearer that JGit uses "$FALL-THROUGH$", not "fall
through", to suppress fallthrough warnings in switch statements.
Eclipse does not pay attention to the second comment style.
Change-Id: I5279a727aee2868854d06bfcaac8cb8186b4299e
Signed-off-by: Jonathan Nieder <jrn@google.com>
Two submodules at the same path on different branches need not represent
the same repository, and two submodules at different paths can represent
the same one.
The C Git implementation uses the submodule name to internally manage
the submodule repositories under .git/modules. When a submodule
represents different repositories in different branches, it makes a
conflict inside .git/modules.
The current RepoCommand implementation uses submodule paths as the
submodule names. When the manifest file mounts different repositories to
the same path in different branches, this makes a situation described
above. To solve this issue, we can use the project name instead of
the path as the submodule name.
On the other hand, since repo v1.12.8~3^2 (repo: Support multiple
branches for the same project., 2013-10-11), a manifest file can mount
the same project to different paths. If we naively use the project
name as the submodule name, it makes a conflict in .git/modules, too.
This patch uses the project name as the submodule name basically, but
when the same project is mounted to different paths, it uses the project
name and path as the submodule name.
Change-Id: I09dc7d62ba59016fe28852d3139a56ef7ef49b8f
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Reported-by: JP Sugarbroad <jpsugar@google.com>
Remove completely the empty directories under refs/<namespace>
including the first level partition of the changes, when they are
completely empty.
Bug: 536777
Change-Id: I88304d34cc42435919c2d1480258684d993dfdca
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Get the full IOException of the reason why a directory
cannot be removed during GC.
Change-Id: Ia555bce009fa48087a73d677f1ce3b9c0b685b57
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When processing a fetch using protocol v2, UploadPack#fetchV2 sends an
extraneous flush pkt when also sending a packfile (#sendPack sending its
own flush pkt). Update that method to only send the flush pkt if the
packfile is not being sent.
Change-Id: I7117a264bccd2d7f3a048645fcb8425a9d78d526
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
In a0c9016abd ("upload-pack: send refs' objects despite "filter"",
2018-07-09), Git updated the "filter" option in the fetch-pack
upload-pack protocol to not filter objects explicitly specified in
"want" lines, even if they match the criterion of the filter. Update
JGit to match that behavior.
Change-Id: Ia4d74326edb89e61062e397e05483298c50f9232
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Propagating more information from the manifest to the superproject
tends to work out well. These particular settings mean:
Recording the remote branch in .gitmodules allows
- "git submodule update --remote" to fetch the right branch
- Gerrit's submodule subscription feature to subscribe from the
right branch, if requested
Recording groups in .gitattributes allows commands like "git clone
--recurse-submodules=:(attr:platform-linux) $superproject" to clone
the correct set of projects.
Recording the shallow bit in .gitmodules means that "git clone
--recurse-submodules" will use shallow clone in submodules where that
was requested in the manifest.
Gerrit's supermanifest plugin records the remote branch and shallow
bit by default already, and most users of that plugin configure it to
record groups in .gitattributes as well, so for most users this will
be a no-op.
Change-Id: Id2ed47cbca5ce822bde517494673c86ab8c58da9
Signed-off-by: Jonathan Nieder <jrn@google.com>
Don't try to delete folders if the merger chooses THEIRS, but all of
BASE, OURS, and THEIRS contain the folder.
Add a test for rebase with auto-stash and subdirectories that
verifies this case. The needless directory deletion and reporting
such directories in getModifiedFiles() was the root cause of bug
536880.
Note even with this fix, bug 536880 will not be fixed in all cases
yet. There may still be cases where the set of modified files ends
up containing directories. This will be dealt with in EGit where
this set is used. (See https://git.eclipse.org/r/#/c/126242/ .)
Bug: 536880
Change-Id: I62b4571a1c1d4415934a6cb4270e0c8036deb2e9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
04b9f4436 fixed places where compressed bitmaps were holding on to their
full buffers, but missed this StoredBitmap.getBitmap() case where a
bitmap is resonstituted from an xor chain.
Change-Id: I7cf75d9e49c18a1a8a880a4df7e821502edc68a4
Signed-off-by: Terry Parker <tparker@google.com>
Currently SubmoduleAddCommand always uses the path as submodule name.
This patch lets the caller specify a submodule name.
SubmoduleUpdateCommand still does not make use of the submodule name
(see bug 535027) but Git does. To avoid triggering CVE-2018-11235,
do some validation on the name to avoid '..' path components.
[jn: fleshed out commit message, mostly to work around flaky CI]
Change-Id: I6879c043c6d7973556e2080387f23c246e3d76a5
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Make the method names more consistent and their semantics simpler:
hasRef and seekRef to look up a single exact reference by name and
hasRefsByPrefix and seekRefsByPrefix to look up multiple references by
name prefix.
In particular, splitting hasRef into two separate methods for its
different uses makes DfsReftableDatabase.isNameConflicting easier to
follow.
[jn: fleshed out commit message]
Change-Id: I71106068ff3ec4f7e14dd9eb6ee6b5fab8d14d0b
Signed-off-by: Minh Thai <mthai@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Reftable implementation of RefDatabase.getRefsByPrefix() should be
more performant, as references are filtered directly by prefix;
instead of fetching the whole subtree then filter by prefix.
Change-Id: If4f5f8c08285ea1eaec9efb83c3d864cea7a1321
Signed-off-by: Minh Thai <mthai@google.com>
The "Building bitmaps" GC phase fails for large repositories (repos with
10M objects use 1.25MB per uncompressed bitmap, and those with long
histories may build >25k bitmaps). Since these bitmaps xor well against
each other, the actual space needed for each compressed bitmap is
usually no more than a few KB. Calling trim() will ensure we aren't
holding on to excess memory.
Change-Id: I40bf78c730b9f6051da6025f9777ce27220a5b0a
Signed-off-by: Terry Parker <tparker@google.com>
This may be convenient for downstream implementers who require a dummy
StoredConfig implementation, rather than making them reimplement the two
abstract StoredConfig methods.
Change-Id: I2b7bc6250d722c2b95d9f99e4eff1e5bf97cb567
After packaging references, the folders containing these references are
not deleted. In a busy repository, this causes operations to slow down
as traversing the references tree becomes longer.
Delete empty reference folders after the loose references have been
packed.
To avoid deleting a folder that was just created by another concurrent
operation, only delete folders that were not modified in the last 30
seconds.
Signed-off-by: Hector Oswaldo Caballero <hector.caballero@ericsson.com>
Change-Id: Ie79447d6121271cf5e25171be377ea396c7028e0
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Log as warning when an attempt to remove a directory
fails. This helps troubleshooting some bugs like the GC leaving
behind empty directories.
Change-Id: Idb94ce17f8be9668a970c7ecae31436bf434073c
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Try to give as much information as possible. The connection's
response message might contain additional hints as to why the
connection could not be established.
Bug: 536541
Change-Id: I7230e4e0be9417be8cedeb8aaab35186fcbf00a5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
In a new RevWalk, if the first object parsed is one of the
shallow commits, the following happens:
1) RevCommit.parseCanonical() is called on a new "r1" RevCommit.
2) RevCommit.parseCanonical() immediately calls
RevWalk.initializeShallowCommits().
3) RevWalk.initializeShallowCommits() calls lookupCommit(id),
creating and adding a new "r2" version of this same object and
marking its parents empty.
4) RevCommit.parseCanonical() initializes the "r1" RevCommit's
fields, including the parents.
5) RevCommit.parseCanonical()'s caller uses the "r1" commit that
has parents, losing the fact that it is a shallow commit.
This change passes the current RevCommit as an argument to
RevWalk.initializeShallowCommits() so that method can set its
parents empty rather than creating the duplicate "r2" commit.
Change-Id: I67b79aa2927dd71ac7b0d8f8917f423dcaf08c8a
Signed-off-by: Terry Parker <tparker@google.com>
The previous algorithm selected commits by creating bitmaps at
each branch tip, doing a revwalk to populate each bitmap, and
looping in this way:
1) Select the remaining branch with the most commits (the branch
whose bitmap has the highest cardinality)
2) Select well-spaced bitmaps in that branch
3) Remove commits in the selected branch from the remaining
branch-tip bitmaps
4) Repeat at #1
This algorithm gave good commit selection on all branches but
a more uniform selection on "important" branches, where branch
length is the proxy for "important". However the algorithm
required N bitmaps of size M solely for the purpose of commit
selection, where N is the number of branch tips in the primary
GC pack, and M is the number of objects in the pack.
This new algorithm uses branch modification date as the proxy for
"important" branches, replacing the N*M memory allocation with a
single M-sized bitmap and N revwalks from new branch tips to
shared history (which will be short when there is a lot of shared
history).
GcCommitSelectionTest.testDistributionOnMultipleBranches verifies
that this algorithm still yields good coverage on all branches.
Change-Id: Ib6019b102b67eabb379e6b85623e4b5549590e6e
Signed-off-by: Terry Parker <tparker@google.com>
Since no files are actually deleted it makes no sense to fire such an
event.
Change-Id: I66e87afc1791f27fddaa873bafe8bb8b61662535
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This change fixes the issue [1]. Before this fix, a merge involving
the caching of consecutive yet similar filenames with Norwegian
characters [2] used to throw an IllegalStateException: Duplicate
stages not allowed. This was caused by inaccurate decoding of the
filenames, using string values assuming default encoding. In the
toString method of DirCacheEntry, used before through getPathString,
UTF-8 encoding is used, but the end result becomes default encoding,
through Object's default toString usage. The special characters in
those two consecutive (particular) filenames [2] were becoming the
very same decoded /single character, lending consecutive -but then
identical- filenames. Thus the perceived duplicate 0-staging of the
file(s).
Replace getPathString usage with getRawPath for this specific case,
or use byte array representations of cached entries instead of string.
Adding a test for this change is not possible, as there is no known
way to change the default encoding for filenames such as [2] (e.g.).
JGitTestUtil does write file contents through UTF-8, but encoding like
so does not apply to the actual file name. Hence there is no way to
create files with names properly made of special characters such as
[2]'s. And the test that is necessary for this case assumes such
Norwegian (or similar characters) filenames. Changing the default
locale programmatically in a test has no effect either. And changing
the LANG value passed to the JVM is only possible upon starting it.
[1] https://bugs.chromium.org/p/gerrit/issues/detail?id=9153
[2] <=>
(...)
"a/b/SíÒr-Norge.map",
"a/b/Sør-Norge.map",
(...)
Change-Id: Ib9f2f5297932337c9817064cc09d9f774dd168f4
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
If I run
git config --global protocol.version 2
mkdir repo
cd repo
git init --bare
git remote add origin https://go.googlesource.com/proposal
git fetch --depth=1
git fetch --unshallow
then I expect to have a full history, just as though I had fetched
without --depth in the first place. Instead, it reports success
but does not fetch enough objects:
$ git fsck
notice: HEAD points to an unborn branch (master)
Checking object directories: 100% (256/256), done.
Checking objects: 100% (468/468), done.
broken link from commit 2c6bc83f234085c8eadb7ea33405ce6223c44d1b
to commit 878975cf2b600675b4c905e5d9591bd24541ae9e
missing commit 878975cf2b600675b4c905e5d9591bd24541ae9e
dangling commit 314be00dae78dd526851f5635e6349014e2ad0c2
The false success indicates problems in the client and the server.
Git 2.18-rc2 (the client) ought to have been more defensive, noticing
the incomplete history. The greater error is in JGit (the server),
which neglects to send the objects requested.
When serving protocol v0 requests, JGit sends the correct objects by
taking unshallowCommits into account when generating the pack to send
to the client. Do the same in the protocol v2 code path. I forgot to
do this in v5.0.0.201806050710-rc3~6 (Teach UploadPack shallow fetch
in protocol v2, 2018-03-15).
Reported-by: Russ Cox <rsc@golang.org>
Change-Id: I282b45f47616a641b9e8d6210b4a070d3efdbb9b
Signed-off-by: Jonathan Nieder <jrn@google.com>
Instead, do it when we return the first PlotCommit from next().
On a repository with many refs, getAllRefsByPeeledObjectId() can
take a while. Doing a late initialization simplifies the handling
of a PlotWalk.
EGit, for instance, creates and configures an instance, and then
does the real walk in a background job. With late initialization,
the potentially expensive getAllRefsByPeeledObjectId() also occurs
in that background job.
Bug: 485743
Change-Id: I84c020cf8f7afda6f181778786612b8e6ddd7ed8
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Christian Halstrick
Masaya Suzuki
Dave Borowitz
Matthias Sohn
Jonathan Tan
Han-Wen Nienhuys
Thomas Wolf
Jonathan Nieder
Luca Milanesio
Terry Parker
Minh Thai
Hector Caballero
Marco Miller