Get the full IOException of the reason why a directory
cannot be removed during GC.
Change-Id: Ia555bce009fa48087a73d677f1ce3b9c0b685b57
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
After packaging references, the folders containing these references are
not deleted. In a busy repository, this causes operations to slow down
as traversing the references tree becomes longer.
Delete empty reference folders after the loose references have been
packed.
To avoid deleting a folder that was just created by another concurrent
operation, only delete folders that were not modified in the last 30
seconds.
Signed-off-by: Hector Oswaldo Caballero <hector.caballero@ericsson.com>
Change-Id: Ie79447d6121271cf5e25171be377ea396c7028e0
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Log as warning when an attempt to remove a directory
fails. This helps troubleshooting some bugs like the GC leaving
behind empty directories.
Change-Id: Idb94ce17f8be9668a970c7ecae31436bf434073c
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
This change fixes the issue [1]. Before this fix, a merge involving
the caching of consecutive yet similar filenames with Norwegian
characters [2] used to throw an IllegalStateException: Duplicate
stages not allowed. This was caused by inaccurate decoding of the
filenames, using string values assuming default encoding. In the
toString method of DirCacheEntry, used before through getPathString,
UTF-8 encoding is used, but the end result becomes default encoding,
through Object's default toString usage. The special characters in
those two consecutive (particular) filenames [2] were becoming the
very same decoded /single character, lending consecutive -but then
identical- filenames. Thus the perceived duplicate 0-staging of the
file(s).
Replace getPathString usage with getRawPath for this specific case,
or use byte array representations of cached entries instead of string.
Adding a test for this change is not possible, as there is no known
way to change the default encoding for filenames such as [2] (e.g.).
JGitTestUtil does write file contents through UTF-8, but encoding like
so does not apply to the actual file name. Hence there is no way to
create files with names properly made of special characters such as
[2]'s. And the test that is necessary for this case assumes such
Norwegian (or similar characters) filenames. Changing the default
locale programmatically in a test has no effect either. And changing
the LANG value passed to the JVM is only possible upon starting it.
[1] https://bugs.chromium.org/p/gerrit/issues/detail?id=9153
[2] <=>
(...)
"a/b/SíÒr-Norge.map",
"a/b/Sør-Norge.map",
(...)
Change-Id: Ib9f2f5297932337c9817064cc09d9f774dd168f4
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
From the javadoc for Files.list:
"The returned stream encapsulates a DirectoryStream. If timely disposal
of file system resources is required, the try-with-resources construct
should be used to ensure that the stream's close method is invoked
after the stream operations are completed."
This is the only call to Files#newDirectoryStream that is not already in
a try-with-resources.
Change-Id: I91e6c56b5d74e8435457ad6ed9e6b4b24d2aa14e
(cherry picked from commit 1c16ea4601)
On a local non-NFS filesystem the .git/config file will be orphaned if
it is replaced by a new process while the current process is reading the
old file. The current process successfully continues to read the
orphaned file until it closes the file handle.
Since NFS servers do not keep track of open files, instead of orphaning
the old .git/config file, such a replacement on an NFS filesystem will
instead cause the old file to be garbage collected (deleted). A stale
file handle exception will be raised on NFS clients if the file is
garbage collected (deleted) on the server while it is being read. Since
we no longer have access to the old file in these cases, the previous
code would just fail. However, in these cases, reopening the file and
rereading it will succeed (since it will open the new replacement file).
Since retrying the read is a viable strategy to deal with stale file
handles on the .git/config file, implement such a strategy.
Since it is possible that the .git/config file could be replaced again
while rereading it, loop on stale file handle exceptions, up to 5 extra
times, trying to read the .git/config file again, until we either read
the new file, or find that the file no longer exists. The limit of 5 is
arbitrary, and provides a safe upper bounds to prevent infinite loops
consuming resources in a potential unforeseen persistent error
condition.
Change-Id: I6901157b9dfdbd3013360ebe3eb40af147a8c626
Signed-off-by: Nasser Grainawi <nasser@codeaurora.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If we give Jsch access to the ssh config file, we must _not_ resolve
the host name from the alias. Instead we must give the alias (i.e.,
the host name as is in the URI) to Jsch, so that it finds the same
ssh config entry.
Otherwise if the hostname in the URI, which is taken as an alias in
ssh config ("Host" line), is unequal to the "Hostname" line, and
there happens to be another ssh config entry with that translated
host name as alias, Jsch will pick up that second entry, and we end
up with a strange mixture of both.
Add tests for this case.
Bug: 531118
Change-Id: I249d8c073b0190ed110a69dca5b9be2a749822c3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Jsch unconditionally overwrites the port from the ssh config
file (if a port is specified there), even if the URI explicitly does
give a different port.
Fix this, and add tests.
Change-Id: I7b014543c7ece26270e366db39d7647f82d64f0d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* Fix "can not" -> "cannot" in two messages
* Re-word "Cannot mkdir" to "Cannot create directory"
Change-Id: Ide0cec55eeeebd23bccc136257c80f47638ba858
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Jsch caches keys (aka identities) specified in ~/.ssh/config via
IndentityFile only for the current Jsch Session. This results in
multiple password prompts for successive sessions.
Do the handling of IdentityFile exclusively in JGit, as it was before
4.9. JGit uses different Jsch instances per host and caches the
IdentityFile there, allowing it to be re-used in different sessions
for the same host.
* Add comments to explain this.
* Move the JschBugFixingConfig from OpenSshConfig to
JschConfigSessionFactory to have all these Jsch work-arounds
in one place.
* Make that config hide the IdentityFile config from Jsch to avoid
that Jsch overrides the JGit behavior.
Bug: 529173
Change-Id: Ib36c34a2921ba736adeb64de71323c2b91151613
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Originally the patterns were escaped twice leading
to wrong matching results.
Bug: 528886
Change-Id: I26e201b4b0ef51cac08f940b76f381260fa925ca
Signed-off-by: Dmitry Pavlenko <pavlenko@tmatesoft.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The intent with the setCompressionLevel and checkExisting methods (which
are already public) is for callers to be able to call them, but they
can't do that if the class itself is not public.
Change-Id: I014044fec3bfa1d33775500345efd60eb5d45bde
When interleaving reads and writes from an unflushed pack, we forgot to
reset the file pointer back to the end of the file before writing more
new objects. This had at least two unfortunate effects:
* The pack data was potentially corrupt, since we could overwrite
previous portions of the file willy-nilly.
* The CountingOutputStream would report more bytes read than the size
of the file, which stored the wrong PackedObjectInfo, which would
cause EOFs during reading.
We already had a test in PackInserterTest which was supposed to catch
bugs like this, by interleaving reads and writes. Unfortunately, it
didn't catch the bug, since as an implementation detail we always read a
full buffer's worth of data from the file when inflating during
readback. If the size of the file was less than the offset of the object
we were reading back plus one buffer (8192 bytes), we would completely
accidentally end up back in the right place in the file.
So, add another test for this case where we read back a small object
positioned before a large object. Before the fix, this test exhibited
exactly the "Unexpected EOF" error reported at crbug.com/gerrit/7668.
Change-Id: I74f08f3d5d9046781d59e5bd7c84916ff8225c3b
When we are cloning we have no refs at all yet, and there cannot
(or at least should not) be any other thread doing something with
refs yet.
Locking loose refs is thus not needed, since there are no loose
refs yet and nothing should be trying to create them concurrently.
Let's skip the whole loose ref locking when we are cloning a repository.
As a result, JGit will write the refs directly to the packed-refs
file, and will not create the refs/remotes/ directories nor the
lock files underneath when cloning and packed refs are used. Since
no lock files are created, any problems on case-insensitive file
systems with tag or branch names that differ only in case are avoided
during cloning.
Detect if we are cloning based on the following heuristics:
* HEAD is a dangling symref
* There is no loose ref
* There is no packed-refs file
Note, however, that there may still be problems with such tag or
branch names later on. This is primarily a five-minutes-past-twelve
stop-gap measure to resolve the referenced bug, which affects the
Oxygen.2 release.
Bug: 528497
Change-Id: I57860c29c210568165276a123b855e462b6a107a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The Config class must be safe to run against untrusted input files.
Reading arbitrary local system paths using include.path is risky for
servers, including Gerrit Code Review.
This was fixed on master [1] by making "readIncludedConfig" a noop
by default. This allows only FileBasedConfig, which originated from
local disk, to read local system paths.
However, the "readIncludedConfig" method was only introduced in [2]
which was needed by [3], both of which are only on the master branch.
On the stable branch only Config supports includes. Therefore this
commit simply disables the include functionality.
[1] https://git.eclipse.org/r/#/c/113371/
[2] https://git.eclipse.org/r/#/c/111847/
[3] https://git.eclipse.org/r/#/c/111848/
Bug: 528781
Change-Id: I9a3be3f1d07c4b6772bff535a2556e699a61381c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
FindBugs reports:
This class is an inner class, but does not use its embedded reference
to the object which created it. This reference makes the instances
of the class larger, and may keep the reference to the creator object
alive longer than necessary. If possible, the class should be made
static.
Change-Id: I9f49de32b4cd81b7ef1239b390353689263bf66e
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If some process executed by FS#readPipe lived for a while after
closing stderr, FS#GobblerThread#run failed with an
IllegalThreadStateException exception when accessing p.exitValue()
for the process which is still alive.
Add Process#waitFor calls to wait for the process completion.
Bug: 528335
Change-Id: I87e0b6f9ad0b995dbce46ddfb877e33eaf3ae5a6
Signed-off-by: Dmitry Pavlenko <pavlenko@tmatesoft.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This was silenced before but suppression was unintentionally lost in
merge commit 6858339c1e.
This method was removed in 4.9.0 and reintroduced in 4.9.1 to avoid
breaking EMF compare versions which were built against older versions.
See: abf420302b
Change-Id: I152d58ac885e044bcab682b9423f6cc83b667989
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When a GC operation is interrupted, temporary packs and indexes can be
left on the pack folder. In big, busy repositories this can lead to
significant amounts of wasted disk space if this interruption is done
with a certain frequency.
Remove stale temporary packs and indexes at the end of the GC process so
they do not accumulate. To avoid interfering with a possible concurrent
JGit GC process in the same repository, only delete temporary files that
are older than one day.
Change-Id: If9b6c1e57fac8a6a0ecc0a703089634caba4caae
Signed-off-by: Hector Caballero <hector.caballero@ericsson.com>
- this is a new warning option in Eclipse 4.7 and higher
- we always change version of all bundles in a release to keep release
engineering simple
Change-Id: Ic7523d77b67b2802f1bab3bc70af250d712a034f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When running on NFS there was a chance that JGits LockFile
semantic is broken because File#createNewFile() may allow
multiple clients to create the same file in parallel. This
change provides a fix which is only used when the new config
option core.supportsAtomicCreateNewFile is set to false. The
default for this option is true. This option can only be set in the
global or the system config file. The repository config file is not
taken into account in this case.
If the config option core.supportsAtomicCreateNewFile is true
then File#createNewFile() is trusted and the behaviour doesn't
change.
But if core.supportsAtomicCreateNewFile is set to false then after
successful creation of the lock file a hardlink to that lock file is
created and the attribute nlink of the lock file is checked to be 2. If
multiple clients manage to create the same lock file nlink would be
greater than 2 showing the error.
This expensive workaround is described in
https://www.time-travellers.org/shane/papers/NFS_considered_harmful.html
section III.d) "Exclusive File Creation"
Change-Id: I3d2cc48d8eb280d5f7039eb94da37804f903be6a
Then list of packed refs was cached in RefDirectory based on mtime of
the packed-refs file. This may fail on NFS when attributes are cached.
A cached mtime of the packed-refs file could cause JGit to trust the
cached content of this file and to overlook that the file is modified.
Honor the config option trustFolderStats and always read the packed-refs
content if the option is false. By default this option is set to true
and this fix is not active.
Change-Id: I2b65cfaa8f4aba2efbf8a5e865d3f09f927e2eec
Jsch 0.1.54 passes on the values from ~/.ssh/config for
"ServerAliveInterval" and "ConnectTimeout" as read from
the config file to java.net.Socket.setSoTimeout(). That
method expects milliseconds, but the values in the config
file are seconds!
The missing conversion in Jsch means that the timeout is
set way too low, and if the server doesn't respond within
that very short time frame, Jsch kills the connection and
then throws an exception with a message such as "session is
down" or "timeout in waiting for rekeying process".
As a work-around, do the conversion to milliseconds in the
Jsch-facing Config interface of OpenSshConfig. That way Jsch
already gets these values as milliseconds.
Bug: 526867
Change-Id: Ibc9b93f7722fffe10f3e770dfe7fdabfb3b97e74
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
JSch unconditionally overrides the user name given in the connection
URI by the one found in ~/.ssh/config (if that does specify one for
the used host). If the SSH config file has a different user name,
we'll end up using the wrong name, which typically results in an
authentication failure or in Eclipse/EGit asking for a password for
the wrong user.
Unfortunately there is no way to prevent or circumvent this Jsch
behavior up front; it occurs already in the Session constructor at
com.jcraft.jsch.Session() and the Session.applyConfig() method. And
while there is a Session.setUserName() that would enable us to correct
this, that latter method has package visibility only.
So resort to reflection to invoke that setUserName() method to ensure
that Jsch uses the user name from the URI, if there is one.
Bug: 526778
Change-Id: Ia327099b5210a037380b2750a7fd76ff25c41a5a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Applications that use ObjectInserters to create lots of individual
objects may prefer to avoid cluttering up the object directory with
loose objects. Add a specialized inserter implementation that produces a
single pack file no matter how many objects. This inserter is loosely
based on the existing DfsInserter implementation, but is simpler since
we don't need to buffer blocks in memory before writing to storage.
An alternative for such applications would be to write out the loose
objects and then repack just those objects later. This operation is not
currently supported with the GC class, which always repacks existing
packs when compacting loose objects. This in turn requires more
CPU-intensive reachability checks and extra I/O to copy objects from old
packs to new packs.
So, the choice was between implementing a new variant of repack, or not
writing loose objects in the first place. The latter approach is likely
less code overall, and avoids unnecessary I/O at runtime.
The current implementation does not yet support newReader() for reading
back objects.
Change-Id: I2074418f4e65853b7113de5eaced3a6b037d1a17
GC explicitly handles the case where a new pack has the same name as an
existing pack due to it containing the exact same set of objects. In
this case, the pack passed to insertPack will have the same name as an
existing pack, but it will also almost certainly have a later mtime than
the existing pack.
The loop in insertPack tried to short-circuit when inserting a new pack,
to avoid walking more of the pack list than necessary. Unfortunately,
this means it will never get to the check for an identical name,
resulting in a duplicate entry for the same PackFile in the pack list.
Remove the short-circuit so that insertPack does not insert a duplicate
entry.
Change-Id: I00711b28594622ad3bd104332334e8a3592cda7f
So far we follow OSGi semantic versioning [1] which says the following:
"A change in the second (minor) part of the version signals that the
change is backward compatible with consumers of the API package but not
with the providers of that API. That is, when the API package goes from
version 1.5 to 1.6 it is no longer compatible with a provider of that
API but consumers of that API are backward compatible with that API
package."
The change Ib5fbf17bdaf727bc5d0e106ce88f2620d9f87a6f broke EMF Compare
which subclasses ResolveMerger since we added a new parameter to the
protected ResolveMerger.processEntry() method. According to the above
cited OSGi semantic versioning this is ok, implementers should expect
that they break on minor version changes of the API they implement.
This change reintroduces the old processEntry() method in order to help
avoid breakage for existing EMF Compare versions which expect breakage
also for the implementer case only for major version change (in this
case from JGit 4.x to 5.x).
[1] http://www.osgi.org/wp-content/uploads/SemanticVersioning1.pdf
See: https://dev.eclipse.org/mhonarc/lists/jgit-dev/msg03431.html
Change-Id: I48ba4308dee73925fa32d6c2fd6b5fd89632c571
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Round first, then calculate the labels. This avoids "x years, 12 months"
and instead produces "x+1 years".
One test case has been added for the original example the bug was found
with, and one assertion has been moved from an existing test case to the
new test case, since it also triggered the bug.
Bug: 525907
Change-Id: I3270af3850c4fb7bae9123a0a6582f93055c9780
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Do tilde replacement for values from the ssh config file that are
file names in all cases to make sure that they are already replaced
when Jsch tries to get the values.
Previously, OpenSshConfig did tilde replacement only for the
IdentityFile in the JGit-facing "Host" interface and left the
replacement in the Jsch-facing "Config" interface to Jsch.
But on Windows the JGit notion of what should be used to replace the
tilde differs from Jsch's replacement. Jsch always replaces the tilde
by the value of the system property "user.home", whereas JGit also
considers some environment variables like %HOME%. This can lead to
rather surprising failures as in the case of bug 526175 where
%HOME% != user.home.
Prior to commit 9d24470 (i.e.,prior to JGit 4.9.0) this problem never
occurred because Jsch was completely unaware of the ssh config file
and all host and IdentityFile handling happened exclusively in JGit.
Bug: 526175
Change-Id: I1511699664ffea07cb58ed751cfdb79b15e3a99e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Shadow commits in the RevWalk in the UploadPack object may cause the
UNINTERESTING flag not being carried over to their parents commits since
they were marked NO_PARENTS during the assumeShallow or
initializeShallowCommits call.
A new RevWalk needs to be created for this reason, but instead of
creating a new RevWalk from Repository, we can reuse the ObjectReader in
the RevWalk of UploadPack to load objects.
Change-Id: Ic3fee0512d35b4f555c60e696a880f8b192e4439
Signed-off-by: Zhen Chen <czhen@google.com>
Per git-config(1), core.logAllRefUpdates auto-creates reflogs for HEAD
and for refs under heads, notes, tags, and for HEAD. Add notes and
remove stash from ReflogWriter#shouldAutoCreateLog. Explicitly force
writing reflogs for refs/stash at call sites, now that this is
supported.
Change-Id: I3a46d2c2703b7c243e0ee2bbf6948279800c485c
Luca Milanesio
Hector Caballero
Marco Miller
Dave Borowitz
Nasser Grainawi
Thomas Wolf
Dmitry Pavlenko
Matthias Sohn
David Pursehouse
David Turner
Christian Halstrick
Michael Keppler
Till Brychcy
Zhen Chen
Dmitry Neverov