Cache FileStoreAttributeCache entries since looking up FileStore for a
file may be expensive on some platforms.
Implement a simple LRU cache based on ConcurrentHashMap using a simple
long counter to order access to cache entries.
Change-Id: I4881fa938ad2f17712c05da857838073a2fc4ddb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
Use the fallback timestamp resolution as already described in the
javadoc of these methods. Using zero file timestamp resolution doesn't
make sense.
Change-Id: Iaad2a0f99c3be3678e94980a0a368181b6aed38c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
To enable persisting the minimal racy threshold per FileStore add a
new config option to the user global git configuration:
- Config section is "filesystem"
- Config subsection is concatenation of
- Java vendor (system property "java.vendor")
- Java version (system property "java.version")
- FileStore's name, on Windows we use the attribute volume:vsn instead
since the name is not necessarily unique.
- separated by '|'
e.g.
"AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"
The same prefix is used as for filesystem timestamp resolution, so
both values are stored in the same config section
- The config key for minmal racy threshold is "minRacyThreshold" as a
time value, supported time units are those supported by
DefaultTypedConfigGetter#getTimeUnit
- measure for 3 seconds to limit runtime which depends on hardware, OS
and Java version being used
If the minimal racy threshold is configured for a given FileStore the
configured value is used instead of measuring it.
When the minimal racy threshold was measured it is persisted in the user
global git configuration.
Rename FileStoreAttributeCache to FileStoreAttributes since this class
is now declared public in order to enable exposing all attributes in one
object.
Example:
[filesystem "AdoptOpenJDK|11.0.3|/dev/disk1s1"]
timestampResolution = 7000 nanoseconds
minRacyThreshold = 3440 microseconds
Change-Id: I22195e488453aae8d011b0a8e3276fe3d99deaea
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
By running FileSnapshotTest#detectFileModified we found that the sum of
measured filesystem timestamp resolution and measured clock resolution
may yield a too small interval after a file has been modified which we
need to consider racily clean. In our tests we didn't find this behavior
on all systems we tested on, e.g. on MacOS using APFS and Java 8 and 11
this effect was not observed.
On Linux (SLES 15, kernel 4.12.14-150.22-default) we collected the
following test results using Java 8 and 11:
In 23-98% of 10000 test runs (depending on filesystem type and Java
version) the test failed, which means the effective interval which needs
to be considered racily clean after a file was modified is larger than
the measured file timestamp resolution.
"delta" is the observed interval after a file has been modified but
FileSnapshot did not yet detect the modification:
"resolution" is the measured sum of file timestamp resolution and clock
resolution seen in Java.
Java version filesystem failures resolution min delta max delta
1.8.0_212-b04 btrfs 98.6% 1 ms 3.6 ms 6.6 ms
1.8.0_212-b04 ext4 82.6% 3 ms 1.1 ms 4.1 ms
1.8.0_212-b04 xfs 23.8% 4 ms 3.7 ms 3.9 ms
1.8.0_212-b04 zfs 23.1% 3 ms 4.8 ms 5.0 ms
11.0.3+7 btrfs 98.1% 3 us 0.7 ms 4.7 ms
11.0.3+7 ext4 98.1% 6 us 0.7 ms 4.7 ms
11.0.3+7 xfs 98.5% 7 us 0.1 ms 8.0 ms
11.0.3+7 zfs 98.4% 7 us 0.7 ms 5.2 ms
Mac OS
1.8.0_212 APFS 0% 1 s
11.0.3+7 APFS 0% 6 us
The observed delta is not distributed according to a normal gaussian
distribution but rather random in the observed range between "min delta"
and "max delta".
Run this test after measuring file timestamp resolution in
FS.FileAttributeCache to auto-configure JGit since it's unclear what
mechanism is causing this effect.
In FileSnapshot#isRacyClean use the maximum of the measured timestamp
resolution and the measured "delta" as explained above to decide if a
given FileSnapshot is to be considered racily clean. Add a 30% safety
margin to ensure we are on the safe side.
Change-Id: I1c8bb59f6486f174b7bbdc63072777ddbe06694d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
These are useful to avoid typos, and also for tab completion.
Change-Id: I0f2d267e46b36bc40297c9657c447f3fd8b9f831
Signed-off-by: David Turner <dturner@twosigma.com>
In a subsequent patch, in some cases, PackWriter#writePack will be
responsible for both the "packfile-uris" and "packfile" sections,
meaning that (in these cases) it must write the "packfile" section
header itself.
In preparation for that patch, move the writing of the "packfile"
section header closer to the invocation of PackWriter#writePack when the
entire fetch response is configured to use the sideband. This means that
"packfile" is written *after* objects are counted (and progress messages
sent to the client in sideband 2) when the "sideband-all" feature is
used (whether "packfile-uris" is used or not), and written *before*
objects are counted otherwise.
Having code to write "packfile" in two places is unfortunate but
necessary. When "sideband-all" is not used, object counting has to
happen after "packfile" is written, because "packfile" activates the
sideband that allows counting progress to be transmitted. When
"packfile-uris" is used, object counting has to happen before "packfile"
is written, because object counting determines whether to send
"packfile-uris" or "packfile". When "sideband-all" is used but
"packfile-uris" is not used, either way works; this commit uses
"packfile-uris" behavior in this case.
Also make the naming of the sideband-activating methods in PacketLineOut
more consistent.
Change-Id: Ifbfd26cc26af10c41b77758168833702d6983df1
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Replace redundant complex implementation of recursive delete by the one
in FileUtils.
Change-Id: Iced1468b96c4f32381a9cf0c651b2bf6a9a9af35
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We should not list the complete cache but only show the cache entry at
hand.
Change-Id: I22be2a4dcbf0145155e23f2389bfcf5662cf23a6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Repeat the test 10000 times to get statistics if measured
fsTimestampResolution is working in practice to detect racy git
situations.
Add a class to compute statistics for this test. Log delta between
lastModified and time when FileSnapshot failed to detect modification.
This happens if the racy git limit determined by measuring filesystem
timestamp resolution and clock resolution is too small. If it would be
correct FileSnapshot would always detect modification or mark it
modified if time since modification is smaller than the racy git limit.
Change-Id: Iabe7af1a7211ca58480f8902d4fa4e366932fc77
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The JGit pgm tests parse the command line internally using Linux
semantics, treating '\' as an escape. File paths therefore must
be quoted, otherwise Windows paths are destroyed. See the
attachment[1] on bug 548598.
[1] https://bugs.eclipse.org/bugs/attachment.cgi?id=279387
Bug: 544326
Change-Id: If42e29c8e808b0983fba2843a34c3ea3dd0e9246
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The newly introduced ProtocolV2HookChain is implemented using lists
instead of arrays.
Update PostUploadHookChain to keep the hook chains implementation
consistent.
Change-Id: I5ae0c923f117ac48558a989464f5d5d868d81f76
Signed-off-by: Ivan Frade <ifrade@google.com>
The newly introduced ProtocolV2HookChain is implemented using lists
instead of arrays.
Update PostUploadHookChain to keep hook chain implementations
consistent.
Change-Id: Ic5694feab943e8949896b93103dbf427716c9bd7
Signed-off-by: Ivan Frade <ifrade@google.com>
This should help to detect if measured fsTimeResolution is too small.
Change-Id: Id1f54dbdedb52b17859904e47776fa3a5887b8be
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use the same JDT core settings as used in org.eclipse.jgit but ignore
non-externalized strings.
Change-Id: If30013c76a197e571601a8abc882ac6a99592374
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Set synchronized to make the config access consistent.
> Inconsistent synchronization of
org.eclipse.jgit.transport.JschConfigSessionFactory.config; locked 80%
of time
In order to make JschConfigSessionFactory threadsafe, synchronize this
method as well.
Change-Id: I32d1bfc2e98363d254992144e795ce72fe1e8846
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
In order to enable counting how frequently a test fails if repeated add
option abortOnFailure. If it is true the test aborts on the first
failure. Otherwise it runs the configured number of repetitions and, if
there was any failure, throws a RepeatException reporting how many of
the test repetitions failed.
Change-Id: Ic47de44d4a6273fddf04b9993ad989903efb40c3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When filesystem timestamp resolution is very high some tests don't work
since runtime of the test setup is too long to reach a racily clean
FileSnapshot. Hence skip these tests when timestamp resolution is higher
than 10 millisecond.
Change-Id: Ie47dd10eda22037b5c1ebff6b6becce0654ea807
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This helps to avoid some time critical tests can't prepare the test
fixture intended since measuring timestamp resolution takes time.
Change-Id: Ib34023e682a106070ca97e98ef16789a4dfb97b4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- use Path instead of File
- create test directories, files and output stream using Files methods
- delete unused list "files"
Change-Id: I8c5c601eca9f613efb5618d33b262277df92a06a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Measure granularity of timestamps stored in the filesystem by setting
and then getting lastModified timestamp until the read value changed.
Increase increment exponentially to limit number of iterations starting
with 1 microsecond since Java's FileTime (up to Java 12) truncates
timestamps to 1 microsecond resolution. The chosen algorithm yields 2000
steps between 1 ms and 2.5 s.
Also measure clock resolution and add that for the total timestamp
resolution. This avoids systematic measurement errors introduced by
doing IO to touch a file.
Change-Id: I9b37138619422452373e298d9d8c7cb2c384db3f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We should not use configuration when creating FileSnapshot when
accessing FileBasedConfig.
Change-Id: Ic521632870f18bb004751642b9d30648dd94049a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A caller cannot install a second hook in the UploadPack without
overwriting whatever is already there.
Offer a method to get the current protocol v2 hook, so it can be chained
with new hooks.
Change-Id: Icb06f94ec52b8c8714f509b5b8622d6db42960fb
Signed-off-by: Ivan Frade <ifrade@google.com>
UploadPack only supports one protocol-v2 hook. There are already cases
where more than one is needed.
Offer a Chain class to compose ProtocolV2Hooks, as other hooks do. It
looks like a single hook but it calls all its members.
Change-Id: Idd173ca7df6672079ac0de03c67f77abac376538
Signed-off-by: Ivan Frade <ifrade@google.com>
This enables higher file timestamp resolution on filesystems like ext4,
Mac APFS (1ns) or NTFS (100ns) providing high timestamp resolution on
filesystem level.
Note:
- on some OSes Java 8,9 truncate milliseconds, see
https://bugs.openjdk.java.net/browse/JDK-8177809, fixed in Java 10
- UnixFileAttributes truncates timestamp resolution to microseconds when
converting the internal representation to FileTime exposed in the API,
see https://bugs.openjdk.java.net/browse/JDK-8181493
- WindowsFileAttributes also provides only microsecond resolution
Change-Id: I25ffff31a3c6f725fc345d4ddc2f26da3b88f6f2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
On Android FS#getFsTimestampResolution always throws a
SecurityException, handle this by falling back to the fallback timestamp
resolution.
Bug: 548947
Change-Id: I0ee6cb3c20e189bdc8d488434a930427ad6f2df2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It seems on cygwin creating a file under a writable directory can fail
with AccessDeniedException. Log a warning in this case and fallback to
worst case timestamp resolution of 2 seconds.
Bug: 548648
Change-Id: Ic50c31ce9dc9ccadd4db5247df929418ac62d45c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Checking lastModified is time critical hence debug trace is the only way
to analyze issues since debugging is impractical.
Also add configuration for buffering of log4j output to reduce runtime
impact when debug trace is on. Limit buffer to 1MiB and comment this
configuration out since we may not always want to use buffering.
Change-Id: Ib1a0537b67c8dc3fac994a77b42badd974ce6c97
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use options
- StandardOpenOption.CREATE to create touched file if not existing
- StandardOpenOption.SYNC to enforce synch of data and meta data changes
- StandardOpenOption.WRITE
Also set mtime explicitly in FileUtils#touch to the current system time.
This should fix that the previous implementation didn't work on
- locally cached Windows network share (CSC-CACHE filesystem) mapped as
a drive
- nfsv4 mounts on Linux
and that it didn't create unborn file like Linux command "touch".
Apache common's and Guava's touch() use the same approach.
Immediately after creating the probe file used to measure timestamp
resolution touch it. This ensures we always use the local system clock
when measuring filesystem timestamp resolution. This should prevent that
clock skew could influence the measured timestamp resolution in case of
a mounted network filesystem.
Bug: 548598
Change-Id: Iaeaf5967963f582395a195aa637b8188bfadac60
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
To enable persisting filesystem timestamp resolution per FileStore add a
new config section to the user global git configuration:
- Config section is "filesystem"
- Config subsection is concatenation of
- Java vendor (system property "java.vm.vendor")
- runtime version (system property "java.vm.version")
- FileStore's name
- separated by '|'
e.g.
"AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"
The prefix is needed since some Java versions do not expose the full
timestamp resolution of the underlying filesystem. This may also
depend on the underlying operating system hence concrete key values
may not be portable.
- Config key for timestamp resolution is "timestampResolution" as a time
value, supported time units are those supported by
DefaultTypedConfigGetter#getTimeUnit
If timestamp resolution is already configured for a given FileStore
the configured value is used instead of measuring the resolution.
When timestamp resolution was measured it is persisted in the user
global git configuration.
Example:
[filesystem "AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"]
timestampResolution = 1 seconds
If locking the git config file fails retry saving the resolution up to 5
times in order to workaround races with another thread.
In order to avoid stack overflow use the fallback filesystem timestamp
resolution when loading FileBasedConfig which creates itself a
FileSnapshot to help checking if the config changed.
Note:
- on some OSes Java 8,9 truncate to milliseconds or seconds, see
https://bugs.openjdk.java.net/browse/JDK-8177809, fixed in Java 10
- UnixFileAttributes up to Java 12 truncates timestamp resolution to
microseconds when converting the internal representation to FileTime
exposed in the API, see https://bugs.openjdk.java.net/browse/JDK-8181493
- WindowsFileAttributes also provides only microsecond resolution up to
Java 12
Hence do not attempt to manually configure a higher timestamp resolution
than supported by the Java version being used at runtime.
Bug: 546891
Bug: 548188
Change-Id: Iff91b8f9e6e5e2295e1463f87c8e95edf4abbcf8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use a Consumer instead of several nullable variables to further
configure UploadPack. This is in preparation for a test in a subsequent
patch needing further customization of the UploadPack object before
invoking it.
Change-Id: I074dff92c711a5ba74558bb4b06c42c115fb9b7f
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Allow the client to specify "sideband-all" in a fetch v2 request,
indicating that the whole response is to be multiplexed (with a sideband
indicator on every non-flush and non-delim pkt) instead of only the
packfile being multiplexed. This allows, for example, progress messages
to be sent at any point in the response.
This implements the "sideband-all" feature documented in
Documentation/technical/protocol-v2.txt in Git.
Change-Id: I3e7f21c88ff0982b1b7ebb09c9ad6c742c4483c8
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
It is difficult to track what's happening with the pckOut instance
field, so replace it with a local variable in #upload instead.
Change-Id: Ibd9225b28334b7133eccdc6d82b26fc96cbde299
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
UploadPackTest.java contains tests that check behavior when
"allowfilter" and "allowrefinwant" are not set, are set, and are not set
but the client insists on using them anyway. Because another capability
is to be included in a subsequent patch, refactor the common code in
these tests.
Remove setBoolean calls with "false", as they are no-ops.
Also take the opportunity to eliminate the overspecification of the
"fetch=" line returned by the capability advertisement.
Change-Id: I289bbd11c902a513cd8d53bc34767e61ebbd5f17
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
EolRepositoryTest and GcCommitSelectionTest timed out frequently when
running unit tests using bazel with the default timeout "moderate"
(300s). Increase timeout of these tests to "long" (900s).
Change-Id: I43588cf950f55b50f868d9fe9c66d22bd428a54c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This change is fixing confusing name warning: [1].
./org.eclipse.jgit.test/tests.bzl:12: confusing-name:
Never use 'l', 'I', or 'O' as names (they're too easily confused
with 'I', 'l', or '0').
And is also fixing: "All calls to rules or macros should pass arguments
by keyword position argument" warning: [2].
./org.eclipse.jgit.test/BUILD:42: positional-args: All calls to rules
or macros should pass arguments by keyword (arg_name=value) syntax.
[1] https://github.com/bazelbuild/buildtools/blob/master/WARNINGS.md#confusing-name
[2] https://github.com/bazelbuild/buildtools/blob/master/WARNINGS.md#positional-args
Change-Id: If5c28ec8a1ddc1d1b1035bd07b838a2a564aea4f
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
This is needed to make build tool chain compatible with the latest
Bazel releases.
Change-Id: I9822b5fe5f934457e6069217d687b3cf4764b7b7
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Dependencies on commons-compress, xz, and jgit-archive are required
for the build to succeed.
Change-Id: I42f3721078a240ad93b8dcab909e66b9bfff0b56
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Matthias Sohn
Jonathan Nieder
David Turner
Jonathan Tan
David Pursehouse
Thomas Wolf
Ivan Frade
Masaya Suzuki
David Ostrovsky