We can't add this method to the super class StoredConfig since that
abstracts from filesystem storage. MockSystemReader.MockConfig is a
StoredConfig and is also used by tests for dfs based storage. Hence
remove this leaky abstraction.
This implies we always use the fallback FileStoreAttributes which means
a config file modification is considered racy within the first 2
seconds. This should not be an issue since typically configs change
rarely and re-reading a config within the racy period is relatively
cheap since configs are small.
Change-Id: Ia2615addc24a7cadf3c566ee842c6f4f07e159a5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Cache FileStoreAttributeCache entries since looking up FileStore for a
file may be expensive on some platforms.
Implement a simple LRU cache based on ConcurrentHashMap using a simple
long counter to order access to cache entries.
Change-Id: I4881fa938ad2f17712c05da857838073a2fc4ddb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
To enable persisting the minimal racy threshold per FileStore add a
new config option to the user global git configuration:
- Config section is "filesystem"
- Config subsection is concatenation of
- Java vendor (system property "java.vendor")
- Java version (system property "java.version")
- FileStore's name, on Windows we use the attribute volume:vsn instead
since the name is not necessarily unique.
- separated by '|'
e.g.
"AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"
The same prefix is used as for filesystem timestamp resolution, so
both values are stored in the same config section
- The config key for minmal racy threshold is "minRacyThreshold" as a
time value, supported time units are those supported by
DefaultTypedConfigGetter#getTimeUnit
- measure for 3 seconds to limit runtime which depends on hardware, OS
and Java version being used
If the minimal racy threshold is configured for a given FileStore the
configured value is used instead of measuring it.
When the minimal racy threshold was measured it is persisted in the user
global git configuration.
Rename FileStoreAttributeCache to FileStoreAttributes since this class
is now declared public in order to enable exposing all attributes in one
object.
Example:
[filesystem "AdoptOpenJDK|11.0.3|/dev/disk1s1"]
timestampResolution = 7000 nanoseconds
minRacyThreshold = 3440 microseconds
Change-Id: I22195e488453aae8d011b0a8e3276fe3d99deaea
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
By running FileSnapshotTest#detectFileModified we found that the sum of
measured filesystem timestamp resolution and measured clock resolution
may yield a too small interval after a file has been modified which we
need to consider racily clean. In our tests we didn't find this behavior
on all systems we tested on, e.g. on MacOS using APFS and Java 8 and 11
this effect was not observed.
On Linux (SLES 15, kernel 4.12.14-150.22-default) we collected the
following test results using Java 8 and 11:
In 23-98% of 10000 test runs (depending on filesystem type and Java
version) the test failed, which means the effective interval which needs
to be considered racily clean after a file was modified is larger than
the measured file timestamp resolution.
"delta" is the observed interval after a file has been modified but
FileSnapshot did not yet detect the modification:
"resolution" is the measured sum of file timestamp resolution and clock
resolution seen in Java.
Java version filesystem failures resolution min delta max delta
1.8.0_212-b04 btrfs 98.6% 1 ms 3.6 ms 6.6 ms
1.8.0_212-b04 ext4 82.6% 3 ms 1.1 ms 4.1 ms
1.8.0_212-b04 xfs 23.8% 4 ms 3.7 ms 3.9 ms
1.8.0_212-b04 zfs 23.1% 3 ms 4.8 ms 5.0 ms
11.0.3+7 btrfs 98.1% 3 us 0.7 ms 4.7 ms
11.0.3+7 ext4 98.1% 6 us 0.7 ms 4.7 ms
11.0.3+7 xfs 98.5% 7 us 0.1 ms 8.0 ms
11.0.3+7 zfs 98.4% 7 us 0.7 ms 5.2 ms
Mac OS
1.8.0_212 APFS 0% 1 s
11.0.3+7 APFS 0% 6 us
The observed delta is not distributed according to a normal gaussian
distribution but rather random in the observed range between "min delta"
and "max delta".
Run this test after measuring file timestamp resolution in
FS.FileAttributeCache to auto-configure JGit since it's unclear what
mechanism is causing this effect.
In FileSnapshot#isRacyClean use the maximum of the measured timestamp
resolution and the measured "delta" as explained above to decide if a
given FileSnapshot is to be considered racily clean. Add a 30% safety
margin to ensure we are on the safe side.
Change-Id: I1c8bb59f6486f174b7bbdc63072777ddbe06694d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Repeat the test 10000 times to get statistics if measured
fsTimestampResolution is working in practice to detect racy git
situations.
Add a class to compute statistics for this test. Log delta between
lastModified and time when FileSnapshot failed to detect modification.
This happens if the racy git limit determined by measuring filesystem
timestamp resolution and clock resolution is too small. If it would be
correct FileSnapshot would always detect modification or mark it
modified if time since modification is smaller than the racy git limit.
Change-Id: Iabe7af1a7211ca58480f8902d4fa4e366932fc77
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This enables higher file timestamp resolution on filesystems like ext4,
Mac APFS (1ns) or NTFS (100ns) providing high timestamp resolution on
filesystem level.
Note:
- on some OSes Java 8,9 truncate milliseconds, see
https://bugs.openjdk.java.net/browse/JDK-8177809, fixed in Java 10
- UnixFileAttributes truncates timestamp resolution to microseconds when
converting the internal representation to FileTime exposed in the API,
see https://bugs.openjdk.java.net/browse/JDK-8181493
- WindowsFileAttributes also provides only microsecond resolution
Change-Id: I25ffff31a3c6f725fc345d4ddc2f26da3b88f6f2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use options
- StandardOpenOption.CREATE to create touched file if not existing
- StandardOpenOption.SYNC to enforce synch of data and meta data changes
- StandardOpenOption.WRITE
Also set mtime explicitly in FileUtils#touch to the current system time.
This should fix that the previous implementation didn't work on
- locally cached Windows network share (CSC-CACHE filesystem) mapped as
a drive
- nfsv4 mounts on Linux
and that it didn't create unborn file like Linux command "touch".
Apache common's and Guava's touch() use the same approach.
Immediately after creating the probe file used to measure timestamp
resolution touch it. This ensures we always use the local system clock
when measuring filesystem timestamp resolution. This should prevent that
clock skew could influence the measured timestamp resolution in case of
a mounted network filesystem.
Bug: 548598
Change-Id: Iaeaf5967963f582395a195aa637b8188bfadac60
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
To enable persisting filesystem timestamp resolution per FileStore add a
new config section to the user global git configuration:
- Config section is "filesystem"
- Config subsection is concatenation of
- Java vendor (system property "java.vm.vendor")
- runtime version (system property "java.vm.version")
- FileStore's name
- separated by '|'
e.g.
"AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"
The prefix is needed since some Java versions do not expose the full
timestamp resolution of the underlying filesystem. This may also
depend on the underlying operating system hence concrete key values
may not be portable.
- Config key for timestamp resolution is "timestampResolution" as a time
value, supported time units are those supported by
DefaultTypedConfigGetter#getTimeUnit
If timestamp resolution is already configured for a given FileStore
the configured value is used instead of measuring the resolution.
When timestamp resolution was measured it is persisted in the user
global git configuration.
Example:
[filesystem "AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"]
timestampResolution = 1 seconds
If locking the git config file fails retry saving the resolution up to 5
times in order to workaround races with another thread.
In order to avoid stack overflow use the fallback filesystem timestamp
resolution when loading FileBasedConfig which creates itself a
FileSnapshot to help checking if the config changed.
Note:
- on some OSes Java 8,9 truncate to milliseconds or seconds, see
https://bugs.openjdk.java.net/browse/JDK-8177809, fixed in Java 10
- UnixFileAttributes up to Java 12 truncates timestamp resolution to
microseconds when converting the internal representation to FileTime
exposed in the API, see https://bugs.openjdk.java.net/browse/JDK-8181493
- WindowsFileAttributes also provides only microsecond resolution up to
Java 12
Hence do not attempt to manually configure a higher timestamp resolution
than supported by the Java version being used at runtime.
Bug: 546891
Bug: 548188
Change-Id: Iff91b8f9e6e5e2295e1463f87c8e95edf4abbcf8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In order to avoid blocking on the main thread during measurement
interactive applications like EGit may want to measure the filesystem
timestamp resolution asynchronously.
In order to enable measurement in the background call
FileStoreAttributeCache.setAsyncfileStoreAttrCache(true)
before the first access to cached FileStore attributes.
Bug: 548188
Change-Id: I8c9a2dbfc3f1d33441edea18b90e36b1dc0156c7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If
- pack.waitPreventRacyPack = true (default is false)
- packfile size > pack.minSizePreventRacyPack (default is 100 MB)
wait after a new packfile was written and before it is opened until it
cannot be racy anymore.
If a new packfile is accessed while it's still racy at least the pack's
index will be reread by ObjectDirectory.scanPacksImpl(). Hence it may
save resources to wait one tick of the file system timer to avoid this
reloading. On filesystems with a coarse timestamp resolution it may be
beneficial to skip this wait for small packfiles.
Bug: 546891
Change-Id: I0e8bf3d7677a025edd2e397dd2c9134ba59b1a18
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
FileSnapshot.notRacyClean() assumed a worst case filesystem timestamp
resolution of 2.5 sec (FAT has a resolution of 2 sec). Instead measure
timestamp resolution to avoid unnecessary IO caused by false positives
in detecting the racy git problem caused by finite filesystem timestamp
resolution [1].
Cache the measured resolution per FileStore since timestamp resolution
depends on the respective filesystem type. If timestamp resolution
cannot be measured or fails due to an exception fallback to the worst
case FAT timestamp resolution and avoid caching this value.
Add a 10% safety margin in FileSnapshot.notRacyClean(), though running
FsTest.testFsTimestampResolution() 1000 times which is not using a
safety margin didn't fail on Mac using APFS and Java 8, 11, 12.
Measured Java file timestamp resolution: [2]
[1] https://github.com/git/git/blob/master/Documentation/technical/racy-git.txt
[2] https://docs.google.com/spreadsheets/d/1imy0y6WmRqBf0kjCxzxj2X7M50eIVfa7oaUIzEOHmjo
Bug: 546891
Change-Id: I493f3b57b6b306285ffa7d392339d253e5966ab8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Keep track of the original cause for a packfile invalidation.
It is needed for the sysadmin to understand if there is a real
underlying filesystem problem and repository corruption or if it is
simply a consequence of a concurrency of Git operations (e.g. repack
or GC).
Change-Id: I06ddda9ec847844ec31616ab6d17f153a5a34e33
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Due to finite filesystem timestamp resolution the last modified
timestamp of files cannot detect file changes which happened in the
immediate past (less than one filesystem timer tick ago).
Read and consider file size also, so that differing file size can help
to more accurately detect file changes without reading the file content.
Use bulk read to avoid multiple stat calls to retrieve file attributes.
Change-Id: I974288fff78ac78c52245d9218b5639603f67a46
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In order to validate .gitmodules files, we first need to find them
in the incoming pack.
Do it in the ObjectChecker stage. Check in the tree objects if they
point to a .gitmodules file and report the tree id and the .gitmodules
blob id.
This can be used later to check if the file is in the root of the
project and if the contents are good.
While we're here, make isMacHFSGit more accurate by detecting variants
of filenames that vary in case.
[jn: tweaked NTFS and HFS+ checking; added more tests]
Change-Id: I70802e7d2c1374116149de4f89836b9498f39582
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In C git versions before 2.19.1, the submodule is fetched by running
"git clone <uri> <path>". A URI starting with "-" would be interpreted
as an option, causing security problems. See CVE-2018-17456.
Refuse to add submodules with URIs, names or paths starting with "-",
that could be confused with command line arguments.
[jn: backported to JGit 4.7.y, bringing portions of Masaya Suzuki's
dotdot check code in v5.1.0.201808281540-m3~57 (Add API to specify
the submodule name, 2018-07-12) along for the ride]
Change-Id: I2607c3acc480b75ab2b13386fe2cac435839f017
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The following commits introduced in stable-4.5 and stable-4.9
introduced some minor API additions in service releases.
f7ceeaa2 FileRepository: Add pack-based inserter implementation
085d1f95 Make PackInserter public
10e65cb4 Fix LockFile semantics when running on NFS
Change-Id: I4afed7e0395cf93d828e671080e3ec9ddf20987d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This avoids that we have to suppress API errors whenever we add a new
constant in a minor release. This change affects implementors only which
is ok to do in a minor release following OSGi semantic versioning rules.
Change-Id: Iece841886fbe00f1ba567c5ff68093c542ba265e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
These methods were introduced for 4.11.1 so we have to silence the API
error adding API in a service release raises.
Change-Id: Ic847cebbed439912d3979ec2ec1809f77a28f61e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Respect merge=lfs and diff=lfs attributes where required to replace (in
memory) the content of LFS pointers with the actual blob content from
the LFS storage (and vice versa when staging/merging).
Does not implement general support for merge/diff attributes for any
other use case apart from LFS.
Change-Id: Ibad8875de1e0bee8fe3a1dffb1add93111534cae
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Merges are performed using the raw text as stored in the git
repository. When we write the merge result, we must apply the
correct CRLF settings. Otherwise the line endings in the result
will be wrong.
Bug: 499615
Change-Id: I37a9b987e9404c97645d2720cd1c7c04c076a96b
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This was silenced before but suppression was unintentionally lost in
merge commit 6858339c1e.
This method was removed in 4.9.0 and reintroduced in 4.9.1 to avoid
breaking EMF compare versions which were built against older versions.
See: abf420302b
Change-Id: I152d58ac885e044bcab682b9423f6cc83b667989
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- this is a new warning option in Eclipse 4.7 and higher
- we always change version of all bundles in a release to keep release
engineering simple
Change-Id: Ic7523d77b67b2802f1bab3bc70af250d712a034f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When running on NFS there was a chance that JGits LockFile
semantic is broken because File#createNewFile() may allow
multiple clients to create the same file in parallel. This
change provides a fix which is only used when the new config
option core.supportsAtomicCreateNewFile is set to false. The
default for this option is true. This option can only be set in the
global or the system config file. The repository config file is not
taken into account in this case.
If the config option core.supportsAtomicCreateNewFile is true
then File#createNewFile() is trusted and the behaviour doesn't
change.
But if core.supportsAtomicCreateNewFile is set to false then after
successful creation of the lock file a hardlink to that lock file is
created and the attribute nlink of the lock file is checked to be 2. If
multiple clients manage to create the same lock file nlink would be
greater than 2 showing the error.
This expensive workaround is described in
https://www.time-travellers.org/shane/papers/NFS_considered_harmful.html
section III.d) "Exclusive File Creation"
Change-Id: I3d2cc48d8eb280d5f7039eb94da37804f903be6a
This method was removed in 4.9 and reintroduced in
I48ba4308dee73925fa32d6c2fd6b5fd89632c571 as deprecated in 4.9.1 in
order to help EMF Compare to avoid breakage.
Change-Id: Ia638517178313da42ae13ebcf88ad535d9a02723
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
So far we follow OSGi semantic versioning [1] which says the following:
"A change in the second (minor) part of the version signals that the
change is backward compatible with consumers of the API package but not
with the providers of that API. That is, when the API package goes from
version 1.5 to 1.6 it is no longer compatible with a provider of that
API but consumers of that API are backward compatible with that API
package."
The change Ib5fbf17bdaf727bc5d0e106ce88f2620d9f87a6f broke EMF Compare
which subclasses ResolveMerger since we added a new parameter to the
protected ResolveMerger.processEntry() method. According to the above
cited OSGi semantic versioning this is ok, implementers should expect
that they break on minor version changes of the API they implement.
This change reintroduces the old processEntry() method in order to help
avoid breakage for existing EMF Compare versions which expect breakage
also for the implementer case only for major version change (in this
case from JGit 4.x to 5.x).
[1] http://www.osgi.org/wp-content/uploads/SemanticVersioning1.pdf
See: https://dev.eclipse.org/mhonarc/lists/jgit-dev/msg03431.html
Change-Id: I48ba4308dee73925fa32d6c2fd6b5fd89632c571
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn
Luca Milanesio
Ivan Frade
Thomas Wolf
David Pursehouse
Markus Duft
Christian Halstrick