Factor out the test parameterization to use both connection factories
into a common super class and use it in more tests.
This made HttpClientTests.testV2HttpSubsequentResponse() fail for
Apache HTTP. The test used the pattern
- create POST connection
- setDoOutput(true)
- connect()
- write output stream
- get & read input stream
This pattern is never used in JGit, which actually calls connect() only
in one case in LFS, and that's on a HEAD request.
The above pattern works on JDK, but fails on Apache HTTP because with
Apache HTTP a connect() actually executes the full request including
writing the entity. To work with Apache HTTP, the pattern would need
to be
- create POST connection
- setDoOutput(true)
- write output stream
- connect()
- get & read input stream
which is fine for both. JDK connects implicitly in getOutputStream()
and treats the later explicit connect() as a no-op, and Apache works
because the entity is written when connect() is called.
Because JDK connects implicitly on getOutputStream(), the following
pattern also works with JDK:
- create POST connection
- setDoOutput(true)
- write output stream
- get & read input stream
Support this with Apache HTTP too: let getInputStream() execute
the request if it wasn't executed already.
Remove explicit connect() calls from test code, since JGit doesn't do
those either.
Change-Id: Ica038c00a7b8edcc01d5660d18e961146305b87f
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
So far the git configuration and the system wide git configuration were
always reloaded when jgit accessed these global configuration files to
access global configuration options which are not in the context of a
single git repository. Cache these configurations in SystemReader and
only reload them if their file metadata observed using FileSnapshot
indicates a modification.
Change-Id: I092fe11a5d95f1c5799273cacfc7a415d0b7786c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The "Location" header in a redirect response may contain a relative
URI. Resolve it against the URI the request was made.
Bug: 550033
Change-Id: I29de07dfbbbc794090821b7c190cb2cf662c5a60
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
As reported by Error Prone:
An inner class should be static unless it references members of its
enclosing class. An inner class that is made non-static unnecessarily
uses more memory and does not make the intent of the class clear.
See https://errorprone.info/bugpattern/ClassCanBeStatic
Change-Id: Ib99d120532630dba63cf400cc1c61c318286fc41
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
(cherry picked from commit ee40efcea4)
Allows callers to read all lines in the input stream until the
END marker is reached, without having to explicitly check for
the END marker.
Replace all remaining usage of the END marker with the new method.
Change-Id: I51f419c7f569ab7ed01e1aaaf6b40ed8cdc2116b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Replace reference comparisons of PacketLineIn's DELIM and END strings
with usage of the helper methods isDelimiter() and isEnd().
Change-Id: I52dcfc4ee9097f1bd6970601c716701847d9eebd
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Since 52923e9 ("LocalDiskRepositoryTestCase#createRepository: Default
auto-close to false", Jan 20, 2019) the createBareRepository method
creates repositories that do not get automatically closed in #tearDown.
Convert invocations of createBareRepository to use try-with-resource.
Change-Id: I320030c5d4438713971bee33316bff408bac47fc
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Its implementation contains
} catch (IOException e) {
// Legacy API, assume error means "no"
return false;
}
Better to use ObjectDatabase#has, which throws IOException to report
errors.
Change-Id: I7de02f7ceb8f57b2a8ebdb16d2aa4376775ff933
Signed-off-by: Jonathan Nieder <jrn@google.com>
AdvertiseRefsHook is used to limit the visibility of the refs in Gerrit.
If this hook is not called, then all refs are treated as visible,
causing the server to serve commits reachable from branches the client
should not be able to access, if asked to via a request naming a guessed
object id.
Until 3a529361a76e8267467071e0b13ebb36b97d8fb2 (Call AdvertiseRefsHook
before validating wants, 2018-12-18), UploadPack would invoke this hook
at ref advertisement time but not during negotiation and when serving a
pack file. Add a test to avoid regressing. Stateful bidirectional
transports were not affected, so the test uses HTTP.
[jn: split out when backporting the fix to stable-4.5. The test passes
as long as v4.9.0.201710071750-r~169 (fetch: Accept any SHA-1 on lhs of
refspec, 2017-06-04) is cherry picked along with it.]
Change-Id: I8c017107336adc7cb4c826985779676bf043e648
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This reverts the workaround introduced by
1c6c73c5a9, which is a patch for dealing
with a buggy C Git client v1.7.5 in 2012. We'll stop supporting very old
C Git clients.
Change-Id: I94999a39101c96f210b5eca3c2f620c15eb1ac1b
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Error Prone reports:
Not calling fail() when expecting an exception masks bugs
See https://errorprone.info/bugpattern/MissingFail
Change-Id: I9ac844aa6c5a620d9b5d21d2e242347b3788b96a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
As reported by Error Prone:
An inner class should be static unless it references members of its
enclosing class. An inner class that is made non-static unnecessarily
uses more memory and does not make the intent of the class clear.
See https://errorprone.info/bugpattern/ClassCanBeStatic
Change-Id: Ib99d120532630dba63cf400cc1c61c318286fc41
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The HttpResponseMock class is only used in a single test to assert
on the expected headers. All of its overridden methods are empty, and
this results in warnings in Eclipse:
'Empty block should be documented'
Rather than adding "// Not used" comments, change all of the methods'
implementations to throw UnsupportedOperationException. This not only
gets rid of the warnings, but also makes it explicit that we don't
intend any of them to actually be called.
Change-Id: I8fe06b155e0809bb3507e4e28b00fcc4f9333b0b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The current usage of assertThat causes a warning in Eclipse:
"The expression of type int is boxed into Integer".
Replace it with assertEquals which does not cause this warning, and is
consistent with how such assertions are done in other tests.
Change-Id: Id3de3548353bf6be069b6ede89c605d094b6d3f4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Try to give as much information as possible. The connection's
response message might contain additional hints as to why the
connection could not be established.
Bug: 536541
Change-Id: I7230e4e0be9417be8cedeb8aaab35186fcbf00a5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Teach UploadPack to support protocol v2 with non-bidirectional pipes,
and add support to the HTTP protocol for v2. This is only activated if
the repository's config has "protocol.version" equal to 2.
Change-Id: I093a14acd2c3850b8b98e14936a716958f35a848
Helped-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Remove it from
* package private functions.
* try blocks
* for loops
this was done with the following python script:
$ cat f.py
import sys
import re
import os
def replaceFinal(m):
return m.group(1) + "(" + m.group(2).replace('final ', '') + ")"
methodDecl = re.compile(r"^([\t ]*[a-zA-Z_ ]+)\(([^)]*)\)")
def subst(fn):
input = open(fn)
os.rename(fn, fn + "~")
dest = open(fn, 'w')
for l in input:
l = methodDecl.sub(replaceFinal, l)
dest.write(l)
dest.close()
for root, dirs, files in os.walk(".", topdown=False):
for f in files:
if not f.endswith('.java'):
continue
full = os.path.join(root, f)
print full
subst(full)
Change-Id: If533a75a417594fc893e7c669d2c1f0f6caeb7ca
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
When an auto-closeable resources is not opened in try-with-resource,
the warning "should be managed by try-with-resource" is emitted by
Eclipse.
Fix the ones that can be silenced simply by moving the declaration of
the variable into a try-with-resource.
In cases where we explicitly call the close() method, for example in
tests where we are testing specific behavior caused by the close(),
suppress the warning.
Leave the ones that will require more significant refcactoring to fix.
They can be done in separate commits that can be reviewed and tested
in isolation.
Change-Id: I9682cd20fb15167d3c7f9027cecdc82bc50b83c4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Instead of hard-coding the charset strings "US-ASCII", "UTF-8", and
"ISO-8859-1", use the corresponding constants from StandardCharsets.
UnsupportedEncodingException is not thrown when the StandardCharset
constants are used, so remove the now redundant handling.
Because the encoding names are no longer hard-coded strings, also
remove redundant $NON-NLS warning suppressions.
Also replace existing usages of the constants with static imports.
Change-Id: I0a4510d3d992db5e277f009a41434276f95bda4e
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
When a https connection could not be established because the SSL
handshake was unsuccessful, TransportHttp would unconditionally
throw a TransportException.
Other https clients like web browsers or also some SVN clients
handle this more gracefully. If there's a problem with the server
certificate, they inform the user and give him a possibility to
connect to the server all the same.
In git, this would correspond to dynamically setting http.sslVerify
to false for the server.
Implement this using the CredentialsProvider to inform and ask the
user. We offer three choices:
1. skip SSL verification for the current git operation, or
2. skip SSL verification for the server always from now on for
requests originating from the current repository, or
3. always skip SSL verification for the server from now on.
For (1), we just suppress SSL verification for the current instance of
TransportHttp.
For (2), we store a http.<uri>.sslVerify = false setting for the
original URI in the repo config.
For (3), we store the http.<uri>.sslVerify setting in the git user
config.
Adapt the SmartClientSmartServerSslTest such that it uses this
mechanism instead of setting http.sslVerify up front.
Improve SimpleHttpServer to enable setting it up also with HTTPS
support in anticipation of an EGit SWTbot UI test verifying that
cloning via HTTPS from a server that has a certificate that doesn't
validate pops up the correct dialog, and that cloning subsequently
proceeds successfully if the user decides to skip SSL verification.
Bug: 374703
Change-Id: Ie1abada9a3d389ad4d8d52c2d5265d2764e3fb0e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Git has a rather elaborate mechanism to specify HTTP configuration
options per URL, based on pattern matching the URL against "http"
subsection names.[1] The URLs used for this matching are always the
original URLs; redirected URLs do not participate.
* Scheme and host must match exactly case-insensitively.
* An optional user name must match exactly.
* Ports must match exactly after default ports have been filled in.
* The path of a subsection, if any, must match a segment prefix of
the path of the URL.
* Matches with user name take precedence over equal-length path
matches without, but longer path matches are preferred over
shorter matches with user name.
Implement this for JGit. Factor out the HttpConfig from TransportHttp
and implement the matching and override mechanism.
The set of supported settings is still the same; JGit currently
supports only followRedirects, postBuffer, and sslVerify, plus the
JGit-specific maxRedirects key.
Add tests for path normalization and prefix matching only on segment
separators, and use the new mechanism in SmartClientSmartServerSslTest
to disable sslVerify selectively for only the test server URLs.
Compare also bug 374703 and bug 465492. With this commit it would be
possible to set sslVerify to false for only the git server using a
self-signed certificate instead of having to switch it off globally
via http.sslVerify.
[1] https://git-scm.com/docs/git-config
Change-Id: I42a3c2399cb937cd7884116a2a32fcaa7a418fcb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The addition of "tooManyRedirects" in commit 7ac1bfc ("Do
authentication re-tries on HTTP POST") was an error I didn't
catch after rebasing that change. That message had been renamed
in the earlier commit e17bfc9 ("Add support to follow HTTP
redirects") to "redirectLimitExceeded".
Also make sure we always use the TransportException(URIish, ...)
constructor; it'll prefix the message given with the sanitized URI.
Change messages to remove the explicit mention of that URI inside the
message. Adapt tests that check the expected exception message text.
For the info logging of redirects, remove a potentially present
password component in the URI to avoid leaking it into the log.
Change-Id: I517112404757a9a947e92aaace743c6541dce6aa
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
There is at least one git server out there (GOGS) that does
not require authentication on the initial GET for
info/refs?service=git-receive-pack but that _does_ require
authentication for the subsequent POST to actually do the push.
This occurs on GOGS with public repositories; for private
repositories it wants authentication up front.
Handle this behavior by adding 401 handling to our POST request.
Note that this is suboptimal; we'll re-send the push data at
least twice if an authentication failure on POST occurs. It
would be much better if the server required authentication
up-front in the GET request.
Added authentication unit tests (using BASIC auth) to the
SmartClientSmartServerTest:
- clone with authentication
- clone with authentication but lacking CredentialsProvider
- clone with authentication and wrong password
- clone with authentication after redirect
- clone with authentication only on POST, but not on GET
Also tested manually in the wild using repositories at try.gogs.io.
That server offers only BASIC auth, so the other paths
(DIGEST, NEGOTIATE, fall back from DIGEST to BASIC) are untested
and I have no way to test them.
* public repository: GET unauthenticated, POST authenticated
Also tested after clearing the credentials and then entering a
wrong password: correctly asks three times during the HTTP
POST for user name and password, then gives up.
* private repository: authentication already on GET; then gets
applied correctly initially to the POST request, which succeeds.
Also fix the authentication to use the credentials for the redirected
URI if redirects had occurred. We must not present the credentials
for the original URI in that case. Consider a malicious redirect A->B:
this would allow server B to harvest the user credentials for server
A. The unit test for authentication after a redirect also tests for
this.
Bug: 513043
Change-Id: I97ee5058569efa1545a6c6f6edfd2b357c40592a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] 6628eb41db
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Update to the latest 9.3 version until we have a solution for bug 514336
we face with 9.4.x versions.
Change-Id: I6d8d476abe8677ce865a08099bb77330effc700a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Thomas Wolf
Matthias Sohn
David Pursehouse
Carsten Hammer
Jonathan Nieder
Masaya Suzuki
Gabriel Couto
Jonathan Tan
Han-Wen Nienhuys