Add a new ssh client implementation based on Apach MINA sshd 2.0.0.
This implementation uses JGit's own config file parser and host entry
resolver. Code inspection of the Apache MINA implementation revealed
a few bugs or idiosyncrasies that immediately would re-introduce bugs
already fixed in the past in JGit.
Apache MINA sshd is not without quirks either, and I had to configure
and override more than I had expected. But at least it was all doable
in clean ways.
Apache MINA boasts support for Bouncy Castle, so in theory this should
open the way to using more ssh key algorithms, such as ed25519.
The implementation is in a separate bundle and is still not used in
the core org.eclipse.jgit bundle. The tests re-use the ssh tests from
the core test bundle.
Bug: 520927
Change-Id: Ib35e73c35799140fe050d1ff4fb18d0d3596580e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add support for git-receive-pack to the ssh git server and add two
new tests for pushing.
This actually uncovered an undocumented requirement in TransportSftp:
the FTP rename operation assumes POSIX semantics, i.e., that the
target is removed. This works as written only for servers that
support and advertise the "posix-rename@openssh.com" FTP extension.
Our little Apache MINA server does not advertise this extension.
Fix the FtpChannel implementation for Jsch to handle this case in a
meaningful way so that it can pass the new "push over sftp" test.
Add more tests to test the behavior of server host key checking.
Also refactor the tests generally to separate better the test
framework from the actual tests.
Bug: 520927
Change-Id: Ia4bb85e17ddacde7b36ee8c2d5d454bbfa66dfc3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Introduce an FtpChannel abstraction, which can be obtained from a
RemoteSession. In JSchSession, wrap a JSch ChannelSftp as such an
FtpChannel. The JSch-specific SftpException is also mapped to a
generic FtpException. Rewrite TransportSftp to use only the new
abstraction layer.
This makes it possible to provide alternate ssh/sftp implementations.
Bug: 520927
Change-Id: I379026f7d4122f34931df909a28e73c02cd8a1da
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Do not add an artificial line break to the message, since it may become
much wider due to the embedded exception messages anyway.
The layout shall be controlled by the egit supplied message dialog using
layout constraints.
Bug: 540537
Change-Id: I4257b52e5e59689dfcbab47bd7c075b3fd031837
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Factor out a helper that calls next() and tunnels IOException in a
RuntimeException, similar to TunnelException.tunnel(RevWalk::next) in
Guava terms[1].
This should make the code a little more readable. No functional
change intended.
[1] https://github.com/google/guava/issues/2828#issuecomment-304187823
Change-Id: I97c062d03a17663d5c40895fd3d2c6a7306d4f39
Signed-off-by: Jonathan Nieder <jrn@google.com>
MissingObjectException and IncorrectObjectTypeException are subclasses
of IOException.
Change-Id: Ib4e1f37ce1b0b08e69ba3375bbdb6ee82ee4f036
Signed-off-by: Jonathan Nieder <jrn@google.com>
Suppose that a repository has the following commit graph:
B C
\ /
A
and it was cloned with --shallow-exclude=A. DepthGenerator does not mark
C as shallow, causing an invalid repository to be produced on the
client, because A is not sent. (A similar issue occurs when
--shallow-since is used to exclude A but neither B nor C.)
This happens whenever an excluded commit has more than one child that is
to be sent to the client. Fix DepthGenerator to handle this case
correctly.
While we're editing DepthWalk.Commit, fix the documentation of
DepthWalk.Commit#isBoundary.
Change-Id: I7068abf0fe0c864d1b0e56e1616dad1aa8719411
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Move the bulk of the basic parsing and host entry handling into a
new class OpenSshConfigFile that has no dependencies on any concrete
ssh implementation. Make the existing OpenSshConfig use the new
parser.
Introduce a new class SshConstants collecting all the various ssh-
related string literals. Also use TreeMaps with a case-insensitive
key comparator instead of converting keys to uppercase. Add a test
to verify that keys are matched case-insensitively.
Most of the parsing code was simply moved, except that the new
parser supports looking up entries given host name, port, and user
name, and can thus handle more %-substitutions correctly. This
feature is not yet used and cannot be used with JSch since JSch
only has a ConfigRepository.getConfig(String) interface.
The split is still worth the trouble as it opens the way to using
another ssh client altogether. Apache MINA sshd, for instance,
resolves host entries giving host name, port, and user name.
(Apache MINA has a built-in ssh config handling, but that has
problems, too: its pattern matching is case-insensitive, and its
merging of host entries if several match is not the same as in
OpenSsh. But with this refactoring, it will be possible to plug in
OpenSshConfigFile into an Apache MINA sshd client without dragging
along JSch.)
One test case that doesn't make sense anymore has been removed. It
tested that repeatedly querying for a host entry returned the same
object. That is no longer true since the caching has been moved to
a deeper level.
Bug: 520927
Change-Id: I6381d52b29099595e6eaf8b05c786aeeaefbf9cc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Do not export o.e.j.internal.transport.parser as public package;
restrict visibility to org.eclipse.jgit.test only.
Add two packages that were not listed at all (o.e.j.internal.revwalk
and o.e.j.internal.submodule) marked as x-internal:=true.
Change-Id: I9188356075515ad354b724102fbd6304b682de6a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The removed method and the new interface method only affect implementors
which is ok in a minor release following OSGi semantic versioning.
Change-Id: Ia5e55bd803965c7590c9278eecc6bdd36241383f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The copyfile entry in the manifest file copies the contents of the file
but doesn't keep the executable flag. This is inconsistent with repo
tool behaviour, plus is natural to expect that the copy of a executable
file is executable.
Transfer the executable bit when copying the file, aligning the
RepoCommand with repo tool and user expectations.
Change-Id: I01b24f482d5939e01d496f032388b3a5c02a912a
Signed-off-by: Ivan Frade <ifrade@google.com>
The RepoCommand.RemoteReader interface doesn't offer access to the mode
of a file. Caller can only default to mark the copied objects as regular
files, losing e.g. the executable bit (if set).
Add a new method readFileWithMode that returns the contents and mode of
the remote file. It supersedes the readFile method, that is marked as
deprecated.
Now callers can set correctly the file mode of the copied file.
Change-Id: I8fce01e4bc5707434c0cbc4aebbae1b6b64756f0
Signed-off-by: Ivan Frade <ifrade@google.com>
237abe6a added method getDeepenNots() with a default implementation and
method getDeepenNotFlag() to the interface DepthWalk. This affects
implementers which is ok in minor release following OSGi semantic
versioning.
Change-Id: I1c872da261fc6825e1e310127761b8b8a6d397d4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The only reference to this externalized text was deleted in c88d34b0.
Change-Id: Iecc7cc89192d69431dddb6550a02f66f0b09accc
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Patterns should treat \r in file names as normal characters
Change-Id: Ica3e0fa4a58acf5326db46bb28571fe5f20f6cd2
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
This allows clients to use the --shallow-exclude parameter (producing a
"deepen-not <ref>" line when communicating with the server) in their fetch
commands when fetching against a JGit server using protocol v2.
Note that the implementation in this commit is somewhat inefficient, as
described in the TODO comment in DepthGenerator.
Change-Id: I9fad3ed9276b624d8f668356ffd99a067dc67ef7
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
In C Git, when a client fetches with "git fetch --shallow-since=<date>
origin <ref>", and all commits reachable from <ref> are older than
<date>, the server dies with a message "no commits selected for shallow
requests". That is, (1) the --shallow-since filter applies to the commit
pointed to by the ref itself, and (2) there is a check that at least one
commit is not filtered out. (The pack-protocol.txt documentation does
not describe this, but the C implementation does this.)
The implementation in commit 1bb430dc21 ("UploadPack: support
deepen-since in protocol v2", 2018-09-27) does neither (1) nor (2), so
do both of these.
Change-Id: I9946327a71627626ecce34ca2d017d2add8867fc
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
The request receives a list of capabilities and takes out the "agent" to
offer it on its own setter (getAgent).
Do this at parse time: when reading the line if the capability is
"agent" set it directly in the builder.
This makes the treatment of "agent" consistent in v0/v1 and v2.
Change-Id: Ie4f9f2cad8639adeeaef4921df49a30a8ce5b42f
Signed-off-by: Ivan Frade <ifrade@google.com>
All of the input lines passed to pre-push hook scripts must be properly
terminated by '\n', so that normal shell scripts like the git-supplied
pre-push.sample work properly, even when pushing just a single branch.
With the old code, hook scripts that use the following pattern didn't
process the last line, because 'read' has a non-zero exit status when
EOF is encountered:
while read local_ref local_sha remote_ref remote_sha; do ... done
Change-Id: Id899662ed3fedef6c314fc4b2ddf91a6dcb98cbb
Signed-off-by: Markus Keller <markus.kell.r@gmail.com>
Use Integer.valueOf() to avoid the warning by implicit conversion due to
usage as argument object in String.format().
Change-Id: Ib314f629d54ae1ce9729c3837d66ce8982a1898a
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Before this commit, a force checkout would fail if there
were any conflicting files. After this commit, a force
checkout will overwrite the conflicting files, as expected.
Making this work required fixing a bug in DirCacheCheckout.
Before this commit, when DirCacheCheckout had
failOnConflict=false, it would delete all conflicting files
from the working copy and just leave them missing. After
this commit, DirCacheCheckout overwrites conflicting files
with the merge tree.
This change in DirCacheCheckout causes "reset --hard" and
"revert --abort" to behave as expected (previously they
would simply delete conflicting files, now they will be
overwritten from the merge tree).
Change-Id: If7e328ee792ef6511ab7d9c26d8d77c39210ec9f
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
UploadPack.getPeerUserAgent() doesn't produce the expected results for
protocol v2 requests. In v2, the agent reported in the request (in an
"agent=" line) is not in the clientCapabilities but in a field on its
own. This makes getPeerUserAgent default to the transport user agent.
Making "agent" a shared property between protocol v0/v1 and v2 fixes the
problem, simplifies the function and harmonizes the implementation
between protocol versions.
In a follow up commit the "agent" will be identified on parsing time,
instead of taking it from the client capabilities.
Change-Id: Idf9825ec4e0b81a1458c8e3701f3e28aafd8a32a
Signed-off-by: Ivan Frade <ifrade@google.com>
In protocol v2, a command request can be followed by server options
(lines like "agent=<>" and "server-option=<>"), but current code
doesn't accept those lines.
Advertise the "server-option" capability, parse the lines and add
them to the request objects.
Other code in JGit can see this options and act accordingly via the
protocol v2 hooks.
This should not require any change in the client side.
Change-Id: If3946390f9cc02d29644b6ca52534b6f757bda9f
Signed-off-by: Ivan Frade <ifrade@google.com>
This is public facing, stable API.
Fortunately, this class is deprecated and will be removed in the next
major version bump.
Change-Id: I91193964732e9d1943e9dc613256196e9c9d1274
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
JSch prefers ssh-rsa key type. When the remote server supports ssh-rsa
key type then this key type will be used even if the known_hosts file
contains a host key for that host, but with different key type.
This caused an unexpected UnknownHostKey error.
To fix the issue first scan the known_hosts, the HostKeyRepository in
JSch API, for any already existing host keys for the target host and
modify the default session settings to prefer their algorithms. However,
do this only if there is no HostKeyAlgorithms setting active.
Change-Id: I236df2a860ddd9289a0a820ddf09c2dea3673d36
The code base has several @SuppressWarnings annotations to suppress
warnings raised by Error Prone, but those are not recognized by
Eclipse and there is currently no way to tell it about them [1].
Suppress them for now.
[1] https://bugs.eclipse.org/bugs/show_bug.cgi?id=392045
Change-Id: I3de7cfa8ad4370ca5be71e1303879c73ab6829c1
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
One more step in removing state from UploadPack, using the request
object instead.
Unfortunately, hooks get from UploadPack information about the current
request. Changing the hooks to receive the request is a public API
change, so at the moment lets keep a reference to the current request.
This kills half the benefit of using a request object vs fields, but
at least we still get better modularity.
Change-Id: I86803d876a621b727c66ee73f2880c93190629e9
Signed-off-by: Ivan Frade <ifrade@google.com>
All data required in this function is available in the request object.
Use that object instead of class members. This reduces class state and
is more readable.
Make the function use a request object and remove the now unnecessary
field "deepenNotRefs".
Change-Id: If861e44c2860a78cf19f456d1b3feb7ddc314cce
Signed-off-by: Ivan Frade <ifrade@google.com>
These properties are protocol v2 specific, but they have clear default
no-op values and having them in the common superclass simplifies client
code.
Move properties deepenSince and deepenNotRefs up to FetchRequest. In
FetchV0Request, they are initialized with their no-op values (0 for
deepenSince and empty list for deepenNotRefs)
Change-Id: I9d46a6dfbe29ebd794b5a6482033cdc70d411a23
Signed-off-by: Ivan Frade <ifrade@google.com>
filterBlobLimit is not part of the UploadPack state, and as field
of the class is difficult to see where it is set or accessed.
Use the request object instead of a field. This reduces
UploadPack state and makes clearer how the value is used.
Change-Id: I96a04a5a8b31bf2243de701e1fd7ebb4080b49e2
Signed-off-by: Ivan Frade <ifrade@google.com>
Mark reference fields as final, annotate constructor parameters and
getters as @NonNull when appropiate and assert the incoming references
are non-null.
Change-Id: I0ef9a513a99313bf461fe9629ce6cc8b409bdedb
Signed-off-by: Ivan Frade <ifrade@google.com>
Some code apply to both, v1 and v2 requests, so it should receive
just a request instance.
Move all common fields to an abstract superclass that can be passed
to "version neutral" functions.
Change-Id: I47c22fb12065bc93767f78175e2b36cc43ccb5c5
Signed-off-by: Ivan Frade <ifrade@google.com>
In FetchV0Request, the fields "wantsIds" and "options" are called
"wantIds" and "clientCapabilities". Those names describe them better.
Rename FetchV2Request fields to follow fetch v0. This will make easier
to extract a superclass later.
Take also the chance to polish the javadoc.
Change-Id: Ia17dbbab8084f39cc529fef9ca5c65e189073767
Signed-off-by: Ivan Frade <ifrade@google.com>
Protocol v0/v1 parsing code doesn't have any real dependency on UploadPack.
Move it to its class and use a request object to read the data in
UploadPack.
This makes the code easier to test, keeps similar structure than protocol v2,
reduces the line count of UploadPack and paves the way to remove the
members as implicit parameters in it.
Change-Id: I8188da8bd77e90230a7e37c02d800ea18463694f
Signed-off-by: Ivan Frade <ifrade@google.com>
Thomas Wolf
Michael Keppler
Jonathan Nieder
Jonathan Tan
Matthias Sohn
Ivan Frade
Marc Strapetz
Markus Keller
David Pursehouse
Ned Twigg
Saša Živkov