The component name ".GIT" inside a tree entry could confuse a
case insensitive filesystem into looking at a submodule and
not a directory entry.
Disallow any case permutations of ".git" to prevent this
confusion from entering a repository and showing up at a
later date on a case insensitive system.
Change-Id: Iaa3f768931d0d5764bf07ac5f6f3ff2b1fdda01b
If the DirCache contains a path that is known to be invalid, refuse to
read the DirCache into memory. This avoids confusing errors later if
an invalid path read from the DirCache were to be passed into a new
DirCacheEntry constructor.
Change-Id: Ic033d81e23a5fbd554cc4dff80a232504562ffa8
isValidPath is an older simple form of the validation performed by
checkValidPath. Use the latter as it more consistently matches
git-core's validation rules.
By running the same validation as fsck, callers creating an entry
for the DirCache are more likely to learn early they are trying
to build trees that will fail fsck.
Change-Id: Ibf5ac116097156aa05c18e231bc65c0854932eb1
Windows does not like naming files "a.". The trailing "." may be
dropped by the filesystem, which is confusing. Even though these
tests currently do not write to disk, future tests like them might.
Replace "." with "-", which has the same sorting properties that
were desirable about ".", but does not have the same limitations.
Change-Id: Ie5b7594bf5e79828d1341883c73ddb70123d5055
When updating a submodule (e.g. during recursive clone) the repository
for the submodule should be located at <gitdir>/modules/<submodule-path>
whereas the working tree of the submodule should be located at
<working-tree>/<submodule-path> (<gitdir> and <working-tree> are
associated to the containing repository). Since CloneCommand has learned
about specifying a separate gitdir this is easy to implement in
SubmoduleUpdateCommand.
Change-Id: I9b56a3dfa50f97f6975c2bb7c97b36296f331b64
This feature is needed to support the new submodule layout where the
.git folder of the submodules is under .git/modules/<submodule>.
Change-Id: If5f13426cfd09b7677e23478e9700c8c25a6dae5
Native git's "init" command allows to specify the location of the .git
folder with the option "--separate-git-dir". This allows for example to
setup repositories with a non-standard layout. E.g. .git folder under
/repos/a.git and the worktree under /home/git/a. Both directories
contain pointers to the other side: /repos/a.git/config contains
core.worktree=/home/git/a . And /home/git/a/.git is a file containing
"gitdir: /repos/a.git". This commit adds that option to InitCommand.
This feature is needed to support the new submodule layout where the
.git folder of the submodules is under .git/modules/<submodule>.
Change-Id: I0208f643808bf8f28e2c979d6e33662607775f1f
Without explicitly closing repos we can't delete the test repositories
on windows.
Change-Id: Id5fa17bd764cbf28703c2f21639d7e969289c2d6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
To update the file length stat we need to use the length of the
temporary file since it's not yet renamed to the target file name here.
The incorrect file length stat update was introduced in
a606dc363d.
Bug: 453962
Change-Id: I715c048227553efae6f8f6b6878c0f04f2609d9c
Also-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Also-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In case of an add/add conflict, no base stage exists. The previous
implementation would skip over the entries because the condition
expected the base stage to always exist.
Change-Id: Ie2b3685d958c09b241991b74e6177401e8a1ebc9
Signed-off-by: Robin Stocker <robin@nibor.org>
The change tries to make jgit behave more like native CLI git regarding
the negation rules. According to [1] "... prefix "!" which negates the
pattern; any matching file excluded by a previous pattern will become
included again." Negating the pattern should not automatically make the
file *not ignored* - other pattern rules have to be considered too.
The fix adds test cases for both bugs 448094 and 407475.
[1] https://www.kernel.org/pub/software/scm/git/docs/gitignore.html
Bug: 448094
Bug: 407475
Change-Id: I322954200dd3c683e3d8f4adc48506eb99e56ae1
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Entries should only be written to the working tree managed by the
Repository. Simplify callers by passing only the entry and computing
the work tree location inside of the checkoutEntry method.
Change-Id: I574e41280d0407f1853fda12f4bd0d30f75d74e7
Encourage callers to explicitly name a directory to hold any
overflow data. Call sites have more information about what is
going into the buffer and how it should be protected at the
filesystem level than just throwing content to the system wide
temporary directory.
Callers that still really don't care (or need to care) can pass
null for the File argument to have the system directory used.
Change-Id: I89009bbee49d3850d42cd82c2c462e51043acda0
Increase the in-memory buffer for the TREE extension to 5 MiB, and
overflow to $GIT_DIR instead of /tmp. Using a larger buffer reduces
the chances a repository will overflow and need to spool the extension
to disk. Using $GIT_DIR allows the TREE extension contents to have
the same file system protections as the final $GIT_DIR/index.
Wrap the entire thing in a try/finally to ensure the temp file is
deleted from disk after the block has finished using it. To avoid
dangling NFS files, LocalFile.destroy() does close the local file
before deleting it.
Change-Id: I8f871181a4689e3ebf0cdd4fd1769333cf7546c3
Callers should manage the ObjectReader, as this allows the JGit library to cache
context relevant information across files checked out at the same time. If the
caller only has one file to checkout, it should still explicitly manage the life
span of the ObjectReader.
Change-Id: Ib57fba6cb4b774ccff8c416ef4d32e2b390f16a9
To improve ignore parser performance we can avoid using java.util.regex
code on simple wildcard patterns with leading or trailing asterisk. As
those patterns represent a majority of ignore rules, the index diff
performance can be drastically increased on huge repository with lot of
ignore rules.
Bug: 450466
Change-Id: I80428441cc8d5de5468813f841d89322413eed8b
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Actually the test only allows a range from [1,255], so let's name the
variable so.
Change-Id: Iecdb8149b83389c67e3cd2f64f4a654c175475be
Signed-off-by: Stefan Beller <sbeller@google.com>
JGit style is to import exactly the classes required, and never
to use "import foo.*" as the foo package could add new classes
in the future which are conflicting/confusing with the imports
already used by a source file.
Change-Id: I5693408c777e5843ec65fff1163d5d717849fa34
The latest changes to IndexDiff just assumed that all configured
submodules are allways cloned. If a configured submodule did not exist
an exception was thrown. This is fixed by this commit.
Bug: 450567
Change-Id: Iabe3b196d998c19483082e5720038ebddaeb1890
In a situation where a certain path was ignored but a working tree file
with this path existed jgit didn't allow to checkout a branch which
didn't ignore this path but contained different content. JGit considered
this to be a checkout conflict to prevent overwriting the file in the
working tree and raised an error. This commit fixes this by ensuring
that ignored dirty working tree files don't lead to a checkout conflict.
Bug: 450169
Change-Id: I90288d314ffac73c24a9c70a5181f8243bd4679a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
For each submodule native git allows to configure which modifications to
submodules should be ignored by the status command. It is possible to
ignore "none", "all", "dirty", "untracked" [1]. This configuration is
now supported by IndexDiff. The StatusCommand offers the possibility to
specify this mode.
[1] http://git-scm.com/docs/gitmodules
Change-Id: Ifd81d574a680f9b4152945ba70f8ec4af4f452c9
The current IgnoreRule/FileNameMatcher implementation scales not well
with huge repositories - it is both slow and memory expensive while
parsing glob expressions (bug 440732). Addtitionally, the "double star"
pattern (/**/) is not understood by the old parser (bug 416348).
The proposed implementation is a complete clean room rewrite of the
gitignore parser, aiming to add missing double star pattern support and
improve the performance and memory consumption.
The glob expressions from .gitignore rules are converted to Java regular
expressions (java.util.regex.Pattern). java.util.regex.Pattern code can
evaluate expression from gitignore rules considerable faster (and with
less memory consumption) as the old FileNameMatcher implementation.
CQ: 8828
Bug: 416348
Bug: 440732
Change-Id: Ibefb930381f2f16eddb9947e592752f8ae2b76e1
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
ResetCommand threw an NPE if neither mode nor path was defined. Instead
it should default to a mixed reset like native git does.
Change-Id: I455902394f9e7b0c7afae42381f34838f7f2a138
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When writing new packs it should be allowed to specify objects as "have"
(objects which should not be included in the pack) which do not exist in
the local repository.
This works with the traditional PackWriter, but when PackWriter was
working on a repository with bitmap indexes and used
PackWriterBitmapWalker then this feature was broken. Non-existing "have"
objects lead to MissingObjectExceptions. That broke push and Gerrit
replication. When the replication target had branches unknown to the
replication source then the source repository wanted to build pack files
where "have" included branch-tips which were unknown in the source
repository.
Bug: 427107
Change-Id: I6b6598a1ec49af68aa77ea6f1f06e827982ea4ac
Also-by: Matthias Sohn <matthias.sohn@sap.com>
JGit should offer the possibility to do a garbage collection in
"aggressive" mode. In this mode garbage collection more aggressively
optimize the repository at the expense of taking much more time.
Technically a aggressive mode garbage collection differs from a
non-aggressive one by:
- not reusing packed objects found in old packs. Recompress every object
- the configuration pack.window is set to 250 (the default is 10)
- the configuration pack.depths is set to 250 (the default is 50)
The associated classes in org.eclipse.jgit.api and the command line
command in org.eclipse.jgit.pgm expose this new option.
The configuration parameters gc.aggressiveDepth and gc.aggressiveWindow
have been introduced to configure this feature.
Bug: 444332
Change-Id: I024101f2810acf6be13ce144c9893d98f5c4ae76
Set the commit message to be used for the merge commit (in case one is
created)
Bug: 442886
Change-Id: Ie5ecc13822faa366f00b3daa07f74c8441cae195
Signed-off-by: Axel Richard <axel.richard@obeo.fr>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
uninteresting
Using the ObjectWalk and marking a commit as uninteresting didn't mark
its root tree as uninteresting. This caused the "missing tree ..."
error in Gerrit under special circumstances. For example, if the
patch-set 2 changes only the commit message then the patch-set 1
and patch-set 2 share the same root-tree:
ps1 -> o o <- ps2
\ /
o root-tree
The transported pack will contain the ps2 commit but not the root-tree
object.
When using the BaseReceivePack.setCheckReferencedObjectsAreReachable
JGit will check the reachability of all referenced objects not provided
in the transported pack. Since the ps1 was advertised it will properly
be marked as uninteresting. However, the root-tree was reachable because
the ObjectWalk.markUninteresting missed to mark it as uninteresting.
JGit was then rejecting the pack with the "missing tree ..." exception.
Gerrit-issue: https://code.google.com/p/gerrit/issues/detail?id=1582
Change-Id: Iff2de8810f14ca304e6655fc8debeb8f3e20712b
Signed-off-by: Saša Živkov <sasa.zivkov@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This matches what C Git does, see "stripped" in `man git-commit-tree`.
It also fixes the bug of the user where an user.email like "<>" would
show up as "<<>>" in EGit.
Bug: 439844
Change-Id: I567a3c620e191ce9d37d318417e63cb5d4483419
Signed-off-by: Robin Stocker <robin@nibor.org>
This reverts commit b646578d89.
openInputStream() is never used in JGit, nor is it used by any
known working DFS implementation. The method was added as a
utility for reading back from a DfsInserter, but the final
implementation of that feature does not requrire this method.
Change-Id: I075ad95e40af49c92b554480f8993ef5658f7684
In the DFS implementation, flushing an inserter writes a new pack to
the storage system and is potentially very slow, but was the only way
to ensure previously-inserted objects were available. For some tasks,
like performing a series of three-way merges, the total size of all
inserted objects may be small enough to avoid flushing the in-memory
buffered data.
DfsOutputStream already provides a read method to read back from the
not-yet-flushed data, so use this to provide an ObjectReader in the
DFS case.
In the file-backed case, objects are written out loosely on the fly,
so the implementation can just return the existing WindowCursor.
Change-Id: I454fdfb88f4d215e31b7da2b2a069853b197b3dd
Instead of passing on the start point as is to CreateBranchCommand, the
resolved ObjectId was used. Given this, CreateBranchCommand did not set
up tracking.
This also fixes CreateBranchCommand with setStartPoint(null) to use HEAD
(instead of NPEing), as documented in the Javadoc.
Bug: 441153
Change-Id: I5ed82b4a4b4a32a81a7fa2854636b921bcb3d471
Signed-off-by: Robin Stocker <robin@nibor.org>
Shawn Pearce
Shawn Pearce
Christian Halstrick
Matthias Sohn
Robin Stocker
Andrey Loskutov
Stefan Beller
Konrad Kügler
Axel Richard
Saša Živkov
Yuxuan 'fishy' Wang
Dave Borowitz