Respect merge=lfs and diff=lfs attributes where required to replace (in
memory) the content of LFS pointers with the actual blob content from
the LFS storage (and vice versa when staging/merging).
Does not implement general support for merge/diff attributes for any
other use case apart from LFS.
Change-Id: Ibad8875de1e0bee8fe3a1dffb1add93111534cae
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Merges are performed using the raw text as stored in the git
repository. When we write the merge result, we must apply the
correct CRLF settings. Otherwise the line endings in the result
will be wrong.
Bug: 499615
Change-Id: I37a9b987e9404c97645d2720cd1c7c04c076a96b
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This was silenced before but suppression was unintentionally lost in
merge commit 6858339c1e.
This method was removed in 4.9.0 and reintroduced in 4.9.1 to avoid
breaking EMF compare versions which were built against older versions.
See: abf420302b
Change-Id: I152d58ac885e044bcab682b9423f6cc83b667989
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- this is a new warning option in Eclipse 4.7 and higher
- we always change version of all bundles in a release to keep release
engineering simple
Change-Id: Ic7523d77b67b2802f1bab3bc70af250d712a034f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When running on NFS there was a chance that JGits LockFile
semantic is broken because File#createNewFile() may allow
multiple clients to create the same file in parallel. This
change provides a fix which is only used when the new config
option core.supportsAtomicCreateNewFile is set to false. The
default for this option is true. This option can only be set in the
global or the system config file. The repository config file is not
taken into account in this case.
If the config option core.supportsAtomicCreateNewFile is true
then File#createNewFile() is trusted and the behaviour doesn't
change.
But if core.supportsAtomicCreateNewFile is set to false then after
successful creation of the lock file a hardlink to that lock file is
created and the attribute nlink of the lock file is checked to be 2. If
multiple clients manage to create the same lock file nlink would be
greater than 2 showing the error.
This expensive workaround is described in
https://www.time-travellers.org/shane/papers/NFS_considered_harmful.html
section III.d) "Exclusive File Creation"
Change-Id: I3d2cc48d8eb280d5f7039eb94da37804f903be6a
This method was removed in 4.9 and reintroduced in
I48ba4308dee73925fa32d6c2fd6b5fd89632c571 as deprecated in 4.9.1 in
order to help EMF Compare to avoid breakage.
Change-Id: Ia638517178313da42ae13ebcf88ad535d9a02723
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
So far we follow OSGi semantic versioning [1] which says the following:
"A change in the second (minor) part of the version signals that the
change is backward compatible with consumers of the API package but not
with the providers of that API. That is, when the API package goes from
version 1.5 to 1.6 it is no longer compatible with a provider of that
API but consumers of that API are backward compatible with that API
package."
The change Ib5fbf17bdaf727bc5d0e106ce88f2620d9f87a6f broke EMF Compare
which subclasses ResolveMerger since we added a new parameter to the
protected ResolveMerger.processEntry() method. According to the above
cited OSGi semantic versioning this is ok, implementers should expect
that they break on minor version changes of the API they implement.
This change reintroduces the old processEntry() method in order to help
avoid breakage for existing EMF Compare versions which expect breakage
also for the implementer case only for major version change (in this
case from JGit 4.x to 5.x).
[1] http://www.osgi.org/wp-content/uploads/SemanticVersioning1.pdf
See: https://dev.eclipse.org/mhonarc/lists/jgit-dev/msg03431.html
Change-Id: I48ba4308dee73925fa32d6c2fd6b5fd89632c571
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Do not automatically organize imports using a save action since this
seems to be buggy and removed some annotations org.eclipse.jgit.pgm
needs to use args4j.
Change-Id: I5a91292c3b9241ce2dde3e4ecce14ad460097129
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Revert the following save actions which were introduced in c0ad77d8:
- always use braces around blocks
- remove unused imports
Other than I expected save actions are run globally on edited files -
and not only on edited code lines only.
Hence revert the save action "Convert control statement bodies to
blocks" which would affect a large number of code lines not affected by
the change editing some small part of a class. This would generate a
large number of changes which may lead to many unnecessary conflicts.
Total number of affected lines across jgit would be around 10k lines.
Also revert "Remove unused imports" since it erroneously removes imports
of some annotations needed by pgm classes using args4j.
Change-Id: I879a47f68e664129e6124cf25c1ae1f6a2d7a5aa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add the following Eclipse save actions executed when saving modified
lines. This should help to reduce manual work needed to maintain a clean
and consistent code style:
- organize imports
- always use braces around blocks
- add missing annotations
- @Override including implementation of interface methods
- @Deprecated
- remove
- unused imports
- unnecessary $NON-NLS$ tags
- redundant type arguments
Also add default values for new settings that were introduced in recent
Eclipse versions up to Neon since we updated save rules the last time.
Change-Id: Idc90b249df044d0552f04edf01a5f607c4846f50
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] 6628eb41db
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The merger is now able to react to the use of the merge attribute.
The value unset and the custom value 'binary' are handled (-merge
and merge=binary)
Since the specification of the merge attribute states that when the
attribute is unset, ours version must be kept in case of a conflict, we
don't overwrite the file but keep the local version.
Bug: 517128
Change-Id: Ib5fbf17bdaf727bc5d0e106ce88f2620d9f87a6f
Signed-off-by: Mathieu Cartaud <mathieu.cartaud@obeo.fr>
When running an automatic GC on a FileRepository, when the caller
passes a NullProgressMonitor, run the GC in a background thread. Use a
thread pool of size 1 to limit the number of background threads spawned
for background gc in the same application. In the next minor release we
can make the thread pool configurable.
In some cases, the auto GC limit is lower than the true number of
unreachable loose objects, so auto GC will run after every (e.g) fetch
operation. This leads to the appearance of poor fetch performance.
Since these GCs will never make progress (until either the objects
become referenced, or the two week timeout expires), blocking on them
simply reduces throughput.
In the event that an auto GC would make progress, it's still OK if it
runs in the background. The progress will still happen.
This matches the behavior of regular git.
Git (and now jgit) uses the lock file for gc.log to prevent simultaneous
runs of background gc. Further, it writes errors to gc.log, and won't
run background gc if that file is present and recent. If gc.log is too
old (according to the config gc.logexpiry), it will be ignored.
Change-Id: I3870cadb4a0a6763feff252e6eaef99f4aa8d0df
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
OSGi semantic versioning rules allow to break implementors of an API in
a minor version.
Change-Id: I4ada3e6455e8e8e1bb8fb71affa0a1b36bd46fc4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add NoPackSignatureException and UnsupportedPackVersionException to
explicitly mark permanent unrecoverable problems with a pack
Assume problem with a pack is permanent only if we are sure the
exception signals a non-transient problem we can't recover from:
- AccessDeniedException: we lack permissions
- CorruptObjectException: we detected corruption
- EOFException: file ended unexpectedly
- NoPackSignatureException: pack has no pack signature
- NoSuchFileException: file has gone missing
- PackMismatchException: pack no longer matches its index
- UnpackException: unpacking failed
- UnsupportedPackIndexVersionException: unsupported pack index version
- UnsupportedPackVersionException: unsupported pack version
Do not attempt to handle Errors since they are thrown for serious
problems applications should not try to recover from.
Change-Id: I2c416ce2b0e23255c4fb03a3f9a0ee237f7a484a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since the introduction of generic type parameter inference in Java 7,
it's not necessary to explicitly specify the type of generic parameters.
Enable the warning in Eclipse, and fix all occurrences.
Change-Id: I9158caf1beca5e4980b6240ac401f3868520aad0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Set missingOverrideAnnotation=warning in Eclipse compiler preferences
which enables the warning:
The method <method> of type <type> should be tagged with @Override
since it actually overrides a superclass method
Justification for this warning is described in:
http://stackoverflow.com/a/94411/381622
Enabling this causes in excess of 1000 warnings across the entire
code-base. They are very easy to fix automatically with Eclipse's
"Quick Fix" tool.
Fix all of them except 2 which cause compilation failure when the
project is built with mvn; add TODO comments on those for further
investigation.
Change-Id: I5772061041fd361fe93137fd8b0ad356e748a29c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Archived zip files for a same commit have different MD5 hash because
mdate and mdate in the header of zip entries are not specified. In
this case, Commons Compress sets an archived time.
In the original git implementation, it's set a commit time:
e2b2d6a172/archive.c (L378)
By this fix, archive command sets the commit time to ZipArchiveEntry
when RevCommit is given as an archiving target.
Change-Id: I30dd8710e910cdf42d57742f8709e9803930a123
Signed-off-by: Naoki Takezoe <takezoe@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
TreeWalk provides the new method getEolStreamType. This new method can
be used with EolStreamTypeUtil in order to create a wrapped InputStream
or OutputStream when reading / writing files. The implementation
implements support for the git configuration options core.crlf, core.eol
and the .gitattributes "text", "eol" and "binary"
CQ: 10896
Bug: 486563
Change-Id: Ie4f6367afc2a6aec1de56faf95120fff0339a358
Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Attributes MacroExpander implements macros used in git attributes. This
is implemented inside the TreeWalk using a lazy created MacroExpander.
In addition, the macro expander caches the global and info attributes
node in order to provide fast merge of attributes.
Change-Id: I2e69c9fc84e9d7fb8df0a05817d688fc456d8f00
Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
Attributes represents a semantic collector of Attribute(s) and replaces
the anonymous Map<String,Attribute>. This class will be returned by
TreeWalk.getAttributes(). It offers convenient access to the attributes
wrapped in the Attributes object. Adds preparations for a future
Attribute Macro Expansion
Change-Id: I8348c8c457a2a7f1f0c48050e10399b0fa1cdbe1
Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
This fixes a warning saying this filter isn't needed anymore.
Change-Id: If77056378befe86c1773950dbe48a82c833fd532
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When checking out a branch we need to access the attributes stored
in the tree to be checked out. E.g. directly after a clone we checkout
the remote HEAD. In this case index and workingtree are still empty.
So we have to search the tree to be checked out for attributes.
Change-Id: I6d96f5d095ed2e3c259d4b12124e404f5215bd9f
Adds the getAttributes feature to the tree walk. The computation of
attributes needs to be done by the TreeWalk since it needs both a
WorkingTreeIterator and a DirCacheIterator.
Bug: 342372
CQ: 9120
Change-Id: I5e33257fd8c9895869a128bad3fd1e720409d361
Signed-off-by: Arthur Daussy <arthur.daussy@obeo.fr>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
These API changes were introduced in f523f21e and 73474466.
BitmapBuilder is an interface to be implemented by implementors of this
interface. According to OSGi semantic versioning rules breaking API
changes require update of the minor version only if implementors of the
API have to be adapted and the changes do not affect clients of the API.
Change-Id: If45d204181ea9bc788b6b57693ca17b1847564c7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Update the project-specific Eclipse settings to replace the use of the
org.eclipse.jdt.annotation.Nullable class the new JGit-specific
@Nullable annotation. I verified that Eclipse reports errors when the
return value of a method annotated with
@org.eclipse.jgit.annotations.Nullable is dereferenced without a null
check.
Also remove the Maven and MANIFEST.MF dependencies on
org.eclipse.jdt.annotation.
Eclipse null analysis uses three annotations: @Nullable, @NonNull and
@NonNullByDefault. All three are updated in this patch because it is
invalid to set the Eclipse preferences to empty values. So far only
@Nullable has been introduced in org.eclipse.jgit.annotations.
My personal preference is to follow the advice in Effective Java and
avoid the null-return idiom, and to avoid passing null values in
general. This sets the expectation is that arguments and return types
are assumed non-null unless otherwise documented. If that is the
expectation, then consistent application of @NonNull is redundant and
hurts readability by cluttering the code, obscuring the occasional
@Nullable annotation that really requires attention.
If the JGit community decides there is value in using the @NonNull and
@NonNullByDefault annotations we can add them--this change configures
Eclipse to use them.
Change-Id: I9af1b786d1b44b9b0d9c609480dc842df79bf698
Signed-off-by: Terry Parker <tparker@google.com>
If the checkout path is currently a non-empty directory (and was a link
or a regular file before), this directory will be removed before
performing checkout, but only if the checkout path is specified.
Bug: 474973
Change-Id: Ifc6c61592d9b54d26c66367163acdebea369145c
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
There should be no functional change, the logic updated only to make
code simple so that compiler can understand what is going for. Removed
all @SuppressWarnings("null") annotations since they cannot be used if
"org.eclipse.jdt.core.compiler.problem.potentialNullReference" option is
set to the "error" level.
Bug: 470647
Change-Id: Ie93c249fa46e792198d362e531d5cbabaf41fdc4
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
a85e817d is a slightly breaking API change to classes that were
technically public and technically released in 4.0. However, it is
highly unlikely that people were actually depending on public behavior,
since there were no public methods to create PushCertificates with
anything other than null field values, or a PushCertificateParser that
did anything other than infinite loop or throw exceptions when reading.
Change-Id: I1d0ba9ea0a347e8ff5a0f4af169d9bb18c5838d2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn
David Pursehouse
Markus Duft
Thomas Wolf
Christian Halstrick
Mathieu Cartaud
David Turner
Naoki Takezoe
Bo Zhang
Hugo Arès
Ivan Motsch
Shawn Pearce
Arthur Daussy
Andrey Loskutov
Terry Parker