Originally the patterns were escaped twice leading
to wrong matching results.
Bug: 528886
Change-Id: I26e201b4b0ef51cac08f940b76f381260fa925ca
Signed-off-by: Dmitry Pavlenko <pavlenko@tmatesoft.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
These are ignored by C git when parsing:
$ git config -f - --list <<EOF
[foo "x\0y"]
bar = baz
[foo "x\qy"]
bar = baz
[foo "x\by"]
bar = baz
[foo "x\ny"]
bar = baz
[foo "x\ty"]
bar = baz
EOF
foo.x0y.bar=baz
foo.xqy.bar=baz
foo.xby.bar=baz
foo.xny.bar=baz
foo.xty.bar=baz
This behavior is different from value parsing, where an invalid escape
sequence is an error (which JGit already does as well):
$ git config -f - --list <<EOF
[foo]
bar = x\qy
EOF
fatal: bad config line 2 in standard input
Change-Id: Ifd40129b37d9a62df3d886d8d7e22f766f54e9d1
When interleaving reads and writes from an unflushed pack, we forgot to
reset the file pointer back to the end of the file before writing more
new objects. This had at least two unfortunate effects:
* The pack data was potentially corrupt, since we could overwrite
previous portions of the file willy-nilly.
* The CountingOutputStream would report more bytes read than the size
of the file, which stored the wrong PackedObjectInfo, which would
cause EOFs during reading.
We already had a test in PackInserterTest which was supposed to catch
bugs like this, by interleaving reads and writes. Unfortunately, it
didn't catch the bug, since as an implementation detail we always read a
full buffer's worth of data from the file when inflating during
readback. If the size of the file was less than the offset of the object
we were reading back plus one buffer (8192 bytes), we would completely
accidentally end up back in the right place in the file.
So, add another test for this case where we read back a small object
positioned before a large object. Before the fix, this test exhibited
exactly the "Unexpected EOF" error reported at crbug.com/gerrit/7668.
Change-Id: I74f08f3d5d9046781d59e5bd7c84916ff8225c3b
Previously, Config was using the same method for both escaping and
parsing subsection names and config values. The goal was presumably code
savings, but unfortunately, these two pieces of the git config format
are simply different.
In git v2.15.1, Documentation/config.txt says the following about
subsection names:
"Subsection names are case sensitive and can contain any characters
except newline (doublequote `"` and backslash can be included by
escaping them as `\"` and `\\`, respectively). Section headers cannot
span multiple lines. Variables may belong directly to a section or to
a given subsection."
And, later in the same documentation section, about values:
"A line that defines a value can be continued to the next line by
ending it with a `\`; the backquote and the end-of-line are stripped.
Leading whitespaces after 'name =', the remainder of the line after
the first comment character '#' or ';', and trailing whitespaces of
the line are discarded unless they are enclosed in double quotes.
Internal whitespaces within the value are retained verbatim.
Inside double quotes, double quote `"` and backslash `\` characters
must be escaped: use `\"` for `"` and `\\` for `\`.
The following escape sequences (beside `\"` and `\\`) are recognized:
`\n` for newline character (NL), `\t` for horizontal tabulation (HT,
TAB) and `\b` for backspace (BS). Other char escape sequences
(including octal escape sequences) are invalid."
The main important differences are that subsection names have a limited
set of supported escape sequences, and do not support newlines at all,
either escaped or unescaped. Arguably, it would be easy to support
escaped newlines, but C git simply does not:
$ git config -f foo.config $'foo.bar\nbaz.quux' value
error: invalid key (newline): foo.bar
baz.quux
I468106ac was an attempt to fix one bug in escapeValue, around leading
whitespace, without having to rewrite the whole escaping/parsing code.
Unfortunately, because escapeValue was used for escaping subsection
names as well, this made it possible to write invalid config files, any
time Config#toText is called with a subsection name with trailing
whitespace, like {foo }.
Rather than pile hacks on top of hacks, fix it for real by largely
rewriting the escaping and parsing code.
In addition to fixing escape sequences, fix (and write tests for) a few
more issues in the old implementation:
* Now that we can properly parse it, always emit newlines as "\n" from
escapeValue, rather than the weird (but still supported) syntax with a
non-quoted trailing literal "\n\" before the newline. In addition to
producing more readable output and matching the behavior of C git,
this makes the escaping code much simpler.
* Disallow '\0' entirely within both subsection names and values, since
due to Unix command line argument conventions it is impossible to pass
such values to "git config".
* Properly preserve intra-value whitespace when parsing, rather than
collapsing it all to a single space.
Change-Id: I304f626b9d0ad1592c4e4e449a11b136c0f8b3e3
It was already increased in 61a943e and 661232b but is still not
enough to take into account snapshot versions that are 100 or more
commits ahead of tag, i.e. 4.9.2.201712150930-r.105-gc1d37ca27
Change-Id: Ibeff73adae06b92fe5bb9c5eced9e4c6a08c437c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The Config class must be safe to run against untrusted input files.
Reading arbitrary local system paths using include.path is risky for
servers, including Gerrit Code Review.
This was fixed on master [1] by making "readIncludedConfig" a noop
by default. This allows only FileBasedConfig, which originated from
local disk, to read local system paths.
However, the "readIncludedConfig" method was only introduced in [2]
which was needed by [3], both of which are only on the master branch.
On the stable branch only Config supports includes. Therefore this
commit simply disables the include functionality.
[1] https://git.eclipse.org/r/#/c/113371/
[2] https://git.eclipse.org/r/#/c/111847/
[3] https://git.eclipse.org/r/#/c/111848/
Bug: 528781
Change-Id: I9a3be3f1d07c4b6772bff535a2556e699a61381c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The Config class must be safe to run against untrusted input files.
Reading arbitrary local system paths using include.path is risky for
servers, including Gerrit Code Review. Return null by default to
incide the include should be ignored.
Only FileBasedConfig which originated from local disk should be trying
to read local system paths. FileBasedConfig already overrides this
method with its own implementation.
Change-Id: I2ff31753868aa1bbac4a6843a4c23e50bd6f46f3
Path.getFileName() may return null if the path has zero elements.
Enclose the dereference in a null-check.
Change-Id: I7ea3d3f07edc13a80b593d28e8fd512a4e1ed56b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
There are several different version ranges specified in the various
manifest files.
Align them all to the same range: [4.12,5.0.0)
Change-Id: I02205b8b8546c9f53ed431b5fd9abf6ddcda4423
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Instead of hard-coding the charset strings "US-ASCII", "UTF-8", and
"ISO-8859-1", use the corresponding constants from StandardCharsets.
UnsupportedEncodingException is not thrown when the StandardCharset
constants are used, so remove the now redundant handling.
Because the encoding names are no longer hard-coded strings, also
remove redundant $NON-NLS warning suppressions.
Also replace existing usages of the constants with static imports.
Change-Id: I0a4510d3d992db5e277f009a41434276f95bda4e
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
ConfigTest#pathToString is not visible to FileBasedConfigTest when
bulding with bazel.
Move it to FileUtils rather than messing about with the bazel build
rules to make it visible.
Change-Id: Idcfd4822699dac9dc4a426088a929a9cd31bf53f
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Relative include.path are now resolved against the config's parent
directory. include.path starting with ~/ are resolved against the
user's home directory
Change-Id: I91911ef404126618b1ddd3589294824a0ad919e6
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Change-Id: I37a2ef611aef97faf1b891a9660c1745435a915d
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When a GC operation is interrupted, temporary packs and indexes can be
left on the pack folder. In big, busy repositories this can lead to
significant amounts of wasted disk space if this interruption is done
with a certain frequency.
Remove stale temporary packs and indexes at the end of the GC process so
they do not accumulate. To avoid interfering with a possible concurrent
JGit GC process in the same repository, only delete temporary files that
are older than one day.
Change-Id: If9b6c1e57fac8a6a0ecc0a703089634caba4caae
Signed-off-by: Hector Caballero <hector.caballero@ericsson.com>
- this is a new warning option in Eclipse 4.7 and higher
- we always change version of all bundles in a release to keep release
engineering simple
Change-Id: Ic7523d77b67b2802f1bab3bc70af250d712a034f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Jsch 0.1.54 passes on the values from ~/.ssh/config for
"ServerAliveInterval" and "ConnectTimeout" as read from
the config file to java.net.Socket.setSoTimeout(). That
method expects milliseconds, but the values in the config
file are seconds!
The missing conversion in Jsch means that the timeout is
set way too low, and if the server doesn't respond within
that very short time frame, Jsch kills the connection and
then throws an exception with a message such as "session is
down" or "timeout in waiting for rekeying process".
As a work-around, do the conversion to milliseconds in the
Jsch-facing Config interface of OpenSshConfig. That way Jsch
already gets these values as milliseconds.
Bug: 526867
Change-Id: Ibc9b93f7722fffe10f3e770dfe7fdabfb3b97e74
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
A tombstone will prevent a delayed reference update from resurrecting the
deleted reference.
Change-Id: Id9f4df43d435a299ff16cef614821439edef9b11
Signed-off-by: Minh Thai <mthai@google.com>
Do not use 0 as the unset value for minUpdateIndex, as input reftables
may have minUpdateIndex starting at 0.
Change-Id: Ie040a6b73d4a5eba5521e51d0ee4580713c84a3e
Signed-off-by: Minh Thai <mthai@google.com>
So far, in order to get the pack directory it was necessary to resolve
it from the object directory. This resolution is already done when
creating the object directory, so simplify the call by just adding a
getter to the pack directory.
Change-Id: I69e783141dc6739024e8b3d5acc30843edd651a7
Signed-off-by: Hector Caballero <hector.caballero@ericsson.com>
When invoking File.toPath(), an (unchecked) InvalidPathException may be
thrown which should be converted to a checked IOException.
For now, we will replace File.toPath() by FileUtils.toPath() only for
code which can already handle IOExceptions.
Change-Id: I0f0c5fd2a11739e7a02071adae9a5550985d4df6
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Currently, unless RequestPolicy#ANY is used, UploadPack rejects all
non-commit "want" lines unless they were advertized. This is fine,
except when "uploadpack.allowreachablesha1inwant" is true
(corresponding to RequestPolicy#REACHABLE_COMMIT), in which case one
would expect that "want"-ing anything reachable would work.
(There is no restriction that "want" lines must only contain commits -
it is allowed for refs to directly point to trees and blobs, and
requesting for them using "want" lines works.)
This commit has been written to avoid performance regressions as much
as possible. In the usual (and currently working) case where the only
unadvertized things requested are commits, we do a standard RevWalk in
order to avoid incurring the cost of loading bitmaps. However, if
unadvertized non-commits are requested, bitmaps are used instead, and
if there are no bitmaps, a WantNotValidException is thrown (as is
currently done).
Change-Id: I68ed4abd0e477ff415c696c7544ccaa234df7f99
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
JGit's delta handling code requires the target to be a single byte
array. Any attempt to inflate a delta larger than fits in the 2GiB
limit will fail with some form of array index exceptions. Check for
this overflow early and abort pack parsing.
Change-Id: I5bb3a71f1e4f4e0e89b8a177c7019a74ee6194da
This new warning was introduced in Eclipse 4.7 Oxygen [1].
The only instances of the warning are in test code that is asserting
that some class does not compare equal to Strings. As in the Gerrit
project [2] these asserts are arguably overkill, but arguably also
a reasonable test of an equals implementation. Ignore the warning in
these cases.
Note that if the project is opened in an earlier version of Eclipse,
a warning "Unsupported @SuppressWarnings" will be emitted.
[1] https://www.eclipse.org/eclipse/news/4.7/M6/
[2] https://gerrit-review.googlesource.com/#/c/gerrit/+/110339/
Change-Id: I08ea33d71e6009cf0f37e6492a475931f447256b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
In a subsequent commit, more tests will be added. This commit allows
those tests to reuse fields.
Change-Id: Icbd17d158cfe3ba4dacbd8a11a67f9e7607b41b3
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Applications that use ObjectInserters to create lots of individual
objects may prefer to avoid cluttering up the object directory with
loose objects. Add a specialized inserter implementation that produces a
single pack file no matter how many objects. This inserter is loosely
based on the existing DfsInserter implementation, but is simpler since
we don't need to buffer blocks in memory before writing to storage.
An alternative for such applications would be to write out the loose
objects and then repack just those objects later. This operation is not
currently supported with the GC class, which always repacks existing
packs when compacting loose objects. This in turn requires more
CPU-intensive reachability checks and extra I/O to copy objects from old
packs to new packs.
So, the choice was between implementing a new variant of repack, or not
writing loose objects in the first place. The latter approach is likely
less code overall, and avoids unnecessary I/O at runtime.
The current implementation does not yet support newReader() for reading
back objects.
Change-Id: I2074418f4e65853b7113de5eaced3a6b037d1a17
This makes detection of binaries exact for ResolveMerger and
DiffFormatter: they will classify files as binary regardless of where
the '\0' occurs in the text.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: Id4342a199628d9406bfa04af1b023c27a47d4014
This method creates a RawText from a blob, but avoids reading the blob
if the start contains null bytes. This should reduce the amount of
garbage that Gerrit produces for changes with binaries.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: Idd202d20251f2d1653e5f1ca374fe644c2cf205f
Round first, then calculate the labels. This avoids "x years, 12 months"
and instead produces "x+1 years".
One test case has been added for the original example the bug was found
with, and one assertion has been moved from an existing test case to the
new test case, since it also triggered the bug.
Bug: 525907
Change-Id: I3270af3850c4fb7bae9123a0a6582f93055c9780
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This ensure DfsReftableDatabase is tested by the same test suites that
use/test InMemoryRepository. It also simplifies the logic of
InMemoryRepository and brings its compatibility story closer to any
other DFS repository that uses reftables for its reference storage.
Change-Id: I881469fd77ed11a9239b477633510b8c482a19ca
Signed-off-by: Minh Thai <mthai@google.com>
Signed-off-by: Terry Parker <tparker@google.com>
Marc Strapetz
Karsten Thoms
Dmitry Pavlenko
Dave Borowitz
Matthias Sohn
David Pursehouse
Shawn Pearce
Minh Thai
Hector Caballero
Thomas Wolf
Jonathan Tan
Han-Wen NIenhuys
Michael Keppler