Replace with calls to WindowCacheConfig.install() as mentioned in
WindowCache.reconfigure's deprecation notice.
Change-Id: Ifdb33501a2209239029c815b1e4e844ea5b56075
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
The ObjectInserter.Formatter instance is only used to call idFor.
Factor out a utility method to do that.
Change-Id: I4ef823110c2152ac7905681df3217eb8001f5bd9
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Use try-with-resource to create instances of FileRepository and
FileWriter.
"resource" and "unused" warnings no longer occur, so remove the
suppression annotations.
Change-Id: I3ad58d4cc2d4c019cd8edda7cb401e9d9f3fb790
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Use FileRepositoryBuilder to create the Repository, except in cases
where the creation was already in a try-block. Convert those to use
a try-with-resource.
Change-Id: I7d7adeee81bda6e80d91a119c7d690de3d00dc2b
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
2262a794b4 removed throws CorruptObjectException, but was not
compiled under Eclipse and did not see errors generated by Eclipse.
Maven build silently ignored the unnecessary code.
Change-Id: I6e9014adcc604588e10e5963d13d0c6ef0e1c617
Git, ByteArrayOutputStream, and DiffFormatter are auto-closeable and
should be managed in try-with-resource.
Change-Id: I83395116acb4b4f7cd4300fd69564355bc07e4bb
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Use JUnit's assumeFalse method to cause the test to skip when
run on Windows.
Change-Id: I3f59440cfe62c37c127e381052b60471fbe8ec5e
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
2262a794b4 removed throws CorruptObjectException, but was not
compiled under Eclipse and did not see errors generated by Eclipse.
Maven build silently ignored the unnecessary code.
Change-Id: I6e9014adcc604588e10e5963d13d0c6ef0e1c617
ResetCommand was not returning the updated ref as a result of the call()
method. Since the ResetCommand is always updating the same ref (HEAD)
this should always be the HEAD ref.
Bug: 440750
Change-Id: I7974975c3ab05e68c208384e69cf0692ded6e8db
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
CommitCommand should allow to specify whether empty commits (commits
having the same tree as the sole predecessor commit) are allowed or not.
Similar to native git's "--allow-empty" flag.
The defaults differ between JGit and native git even after this change.
When not specifying paths then by default JGit allows to create empty
commits while native git does not. It would be API breaking to change
this now.
Bug: 460301
Change-Id: I88feb0c3ffb2c686b1d0594e669729b065cda4cb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Factor out the creation of the SideBandOutputStream objects into
a utility method that wraps it in a try-with-resource.
Remove the "unused" suppression that is now unnecessary, and add
declaration that the tests methods can throw Exception.
Change-Id: Iff02e4e3532bd6ab6e423f197e70d44c4f328d0b
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
After creating a Transport instance callers should always call
its close() method. Use AutoCloseable to document this idiom
and allow use of try-with-resources.
Change-Id: I0c6ff3e39ebecdd7a028dbcae1856a818937b186
Also rename a local variable in one of the tests that was hiding
a class variable of the same name.
Change-Id: Ia9398157b87a78df6eef0b64a833c16ca2e57ce3
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Also remove a local variable in one of the tests that was
hiding a member variable with the same name.
Change-Id: Ia4d94cdbf2d83d8be2645f0a93d8891d01606c59
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Specify the expected exception in the annotation, instead of
catching it and calling `fail()` when it wasn't raised.
Change-Id: I8a640c0e42353533e4e73b85b50c224dc060f2d7
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Store these in the bootstrap layer where they are using $GIT_DIR
as the storage directory for any reference that does not contain '/'.
Change-Id: I5595bf514e4475b7c7e799c2c79446597a3abb4a
By showing the bootstrap layer in getAdditionalRefs() garbage
collector code can be more RefDatabase agnostic and not care about
the special case of RefTree and RefTreeNames for the purposes of
building up the roots to GC. Instead they can combine getRefs(ALL)
and getAdditionalRefs() and have a clean set of roots.
Change-Id: I665cd2456e9316640215b6a08bc728d1356f36d8
Require callers to pass in valid sets for both want and have
collections. Offer PackWriter.NONE as a handy constant for an
empty collection for the have part of preparePack instead of null.
Change-Id: Ifda4450f5e488cbfefd728382b7d30797e229217
This experimental code can be enabled in $GIT_DIR/config:
[core]
repositoryformatversion = 1
[extensions]
refsBackendType = RefTree
When these are set the repository will read references from the
RefTree rooted by the $GIT_DIR/refs/txn/committed reference.
Update debug-rebuild-ref-tree to rebuild refs/txn/committed only from
the bootstrap layer. This avoids misuse by rebuilding using packed-refs
and $GIT_DIR/refs tree.
Change-Id: Icf600e4a36b2f7867822a7ab1f1617d73c710a4b
Instead of storing references in the local filesystem rely on the
RefTree rooted at refs/txn/committed. This avoids needing to store
references in the packed-refs file by keeping all data rooted under
a single refs/txn/committed ref.
Performance to scan all references from a well packed RefTree is very
close to reading the packed-refs file from local disk.
Storing a packed RefTree is smaller due to pack file compression,
about 49.39 bytes/ref (on average) compared to packed-refs using
~65.49 bytes/ref.
Change-Id: I75caa631162dc127a780095066195cbacc746d49
With this support we no longer need the 'utf-8' alias. UTF-8 will be
automatically tried when the encoding header is not recognized and used
if the character sequence cleanly decodes as UTF-8.
Modernize some of the references to use StandardCharsets.
Change-Id: I4c0c88750475560e1f2263180c4a98eb8febeca0
These types were deprecated in 0.9.1 (aka 384a19eee0).
If anyone is still using them, its time to stop.
Change-Id: I3f73347ba78c639e0c6a504812bc1a0702f829b1
Consolidate copies of this function into one location.
Add some unit tests to prevent bugs that were accidentally
introduced while trying to make this refactoring.
Change-Id: I82f64bbb8601ca2d8316ca57ae8119df32bb5c08
A group of updates can be applied by updating the tree in one step,
writing out a new root tree, and storing its SHA-1. If references
are stored in RefTrees, comparing two repositories is a matter of
checking if two SHA-1s are identical. Without RefTrees comparing two
repositories requires listing all references and comparing the sets.
Track the "refs/" directory as a root tree by storing references
that point directly at an object as a GITLINK entry in the tree.
For example "refs/heads/master" is written as "heads/master".
Annotated tags also store their peeled value with ^{} suffix, using
"tags/v1.0" and "tags/v1.0^{}" GITLINK entries.
Symbolic references are written as SYMLINK entries with the blob of
the symlink carrying the name of the symbolic reference target.
HEAD is outside of "refs/" namespace so it is stored as a special
"..HEAD" entry. This name is chosen because ".." is not valid in
a reference name and it almost looks like "../HEAD" which names
HEAD if the reader was inside of the "refs/" directory.
A new Command type is required to handle symbolic references and
peeled references.
Change-Id: Id47e5d4d32149a9e500854147edd7d93c1041a39
Maven pom files force the local encoding to UTF-8 to ensure there are
no differences between machines. They also set the JVM max heap to
256m. Match both in Buck so that results are consistent.
Change-Id: Ice5476dd09352a444a0c97aa0dc28806fddf2ab4
Compile each test in its own java_test() target so they can run in
parallel, reducing total time spent testing on large machines.
$ buck test --all
[-] PROCESSING BUCK FILES...FINISHED 0.3s [100%]
[-] BUILDING...FINISHED 2.9s [100%] (351/383 JOBS, 351 UPDATED, 0.0% CACHE MISS)
[-] TESTING...FINISHED 98.1s (3360 PASS/15 SKIP/0 FAIL)
Change-Id: I8d6541268315089299f933ed23d785b1b3431133
Accept some of the same section keys that fsck does in git-core,
allowing repositories to skip over specific kinds of acceptable
broken objects, e.g.:
[fsck]
duplicateEntries = ignore
zeroPaddedFilemode = ignore
The zeroPaddedFilemode = ignore is a synonym for the JGit specific
allowLeadingZeroFileMode = true. Only accept the JGit key if git-core
key was not specified.
Change-Id: Idaed9310e2a5ce5511670ead1aaea2b30aac903c
David Pursehouse
Matthias Sohn
Shawn Pearce
Christian Halstrick
Andrey Loskutov
Shawn Pearce