ReflogCommand command was throwing an incorrect exception type
when an IOException was wrapped and rethrown from the underlying
ReflogReader. The IOException cause is now provided to the thrown
exception as well.
Change-Id: I9f1842c2d414d3e9c658843f9b448bc18891748e
Since FileHeader provides toString() method (via DiffEntry) we could add
a similar method to HunkHeader.
Change-Id: I7886e5b8f775fa8e8478ac5af37d90b6ef677d8b
This will be the case on the initial commit to a repository
and the ref update should expect a non-existent ref
Change-Id: Iaa06e47e6e8cc4a0281c7683b367d4806dd980ea
We do this for the the names that have an explicit scheme and
do it both ways. The URIish is parsed before decoding. Only
a few special characters are encoded for the path part of the
URI, i.e. space, non-ASCII and control characters. The percent
encoding is assumed to be a stream encoding so we interpret it
as UTF-8.
Change-Id: I82d1910df9472e21d7212a2b984ff7d8fb2cbf0f
There was the possibility that during history rendering we draw a lane
"trough" a passed commit. Vadim Dmitriev found that out in bug 335818.
I added the needed check to that block of code where it was missing.
Bug: 335818
Change-Id: Ic944193b2aca55ff3eb0235d46afa60b7896aa0f
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
The HTTP RFCs require a server to fully consume the request body before
it can return a non-error status code, which is any code below 400.
JGit returns most Git level errors inside of an HTTP 200 OK response,
and sometimes this happens before the entire request was consumed from
the servlet container. In such cases the body must be skipped or read
until EOF is reached, ensuring the HTTP keep-alive semantics will work
for the next request on the same TCP connection.
HTTP status codes >= 400 may be returned without consuming the body,
and a servlet container must set "Connection: close" in the response
headers when this happens, since the state of the request body is not
well defined with an early abort.
With the introduction of sendError() in GitSmartHttpTools there are
only a handful of locations that need to worry about the request body
being consumed, so sprinkle the call in as necessary.
Change-Id: I5381e110585f780c01a764df8e27c80aacf5146e
Error messages are typically short, below the 32 KiB in-memory buffer
size of the SmartOutputStream. When an error is queued up for sending
to a client and an exception is thrown up into the servlet handler we
discarded the message and sent nothing to the client, as the messages
were stuck inside of the SmartOutputStream buffer.
Hoist the creation of the output stream above the invocation of try
block of the service, and use close() in the few catch blocks that
assume there are buffered messages ready for transmission. This will
ensure errors from unpacking a stream in ReceivePack are sent off to
a client correctly, as previously these were causing no status report
to arrive at the client side as the data was stuck in the buffer.
Change-Id: I5534b560697731121f48979ae077aa7c95b8e39c
The stream must be closed to ensure the native resources associated
with its internal Deflater instance are cleaned up early, instead of
waiting for GC to identify the dead object and finialize it.
Change-Id: Ic31b5df563f19404ed4682556999f4332aa61562
I modified the way errors are returned, and this particular test is
now getting a different access denied response. The new text happens
to be what I intended to have here, so update the test.
Change-Id: I53f8410ca0a52755d80473cd5cbcdb4d8502febf
This parallels the CGit behavior of always using refs/heads/master
when it matches the remote advertised HEAD commit.
Change-Id: I5a5cd1516b58d116e334056aba1ef7990697ec30
The method canAmend was added to RepositoryState. It returns true if
amending the HEAD commit is allowed in the current repository state.
Change-Id: Idd0c4eea83a23c41340789b7b877959b457d951e
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
When SSH user/password authentication failed this may have been caused
by changed credentials on the server side. When the SSH credentials of a
user change the SSH connection needs to be re-established and
credentials which may have been stored by the credentials provider
need to be reset in order to enable prompting for the new credentials.
Bug: 356233
Change-Id: I7d64c5f39b68a9687c858bb68a961616eabbc751
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Moves the check from inside the loop to outside the loop
and returns immediately if the HEAD advertisded ref is null
Change-Id: I539da6cafb4f73610b8e00259e32bd4d57f4f4cc
Commit 13931236b9ee2895a98ffdbdacbd0f895956d8a8 in C Git (2011-11-02)
changed the message format:
-Merge remote branch 'origin/foo'
+Merge remote-tracking branch 'origin/foo'
This change does the same in EGit to be consistent.
Change-Id: I7d9c5afa95771dbfe6079b5f89a10b248fee0172
Signed-off-by: Robin Stocker <robin@nibor.org>
Throw a NoHeadException when Repository.getFullBranch
returns null
Bug: 351543
Change-Id: I666cd5b67781508a293ae553c6fe5c080c8f4d99
Signed-off-by: Kevin Sawicki <kevin@github.com>
The GitSmartHttpTools class started as utility functions to help report
useful error messages to users of the android.googlesource.com service.
Now that the GitServlet and GitFilter classes support filters before a
git-upload-pack or git-receive-pack request, server implementors may
these routines helpful to report custom messages to clients. Using the
sendError() method to return an HTTP 200 OK with error text embedded in
the payload prevents native Git clients from retrying the action with a
dumb Git or WebDAV HTTP request.
Refactor some of the existing code to use these new error functions and
protocol constants. The new sendError() function is very close to being
identical to the old error handling code in RepositoryFilter, however we
now use the POST Content-Type rather than the Accept HTTP header to check
if the client will accept the error data in the response body rather than
using the HTTP status code. This is a more reliable way of checking for
native Git clients, as the Accept header was not always populated with the
correct string in older versions of Git smart HTTP.
Change-Id: I828ac2deb085af12b6689c10f86662ddd39bd1a2
If removing the leading slash results in an empty string, return
with an HTTP 404 error before trying to use the RepositoryResolver.
Moving this into a loop ahead of the length check ensures there is
no empty string passed into the resolver.
Change-Id: I80e5b7cf25ae9f2164b5c396a29773e5c7d7286e
ReceivePack (and PackParser) can be configured with the
maxObjectSizeLimit in order to prevent users from pushing too large
objects to Git. The limit check is applied to all object types
although it is most likely that a BLOB will exceed the limit. In all
cases the size of the object header is excluded from the object size
which is checked against the limit as this is the size of which a BLOB
object would take in the working tree when checked out as a file.
When an object exceeds the maxObjectSizeLimit the receive-pack will
abort immediately.
Delta objects (both offset and ref delta) are also checked against the
limit. However, for delta objects we will first check the size of the
inflated delta block against the maxObjectSizeLimit and abort
immediately if it exceeds the limit. In this case we even do not know
the exact size of the resolved delta object but we assume it will be
larger than the given maxObjectSizeLimit as delta is generally only
chosen if the delta can copy more data from the base object than the
delta needs to insert or needs to represent the copy ranges. Aborting
early, in this case, avoids unnecessary inflating of the (huge) delta
block.
Unfortunately, it is too expensive (especially for a large delta) to
compute SHA-1 of an object that causes the receive-pack to abort.
This would decrease the value of this feature whose main purpose is to
protect server resources from users pushing huge objects. Therefore
we don't report the SHA-1 in the error message.
Change-Id: I177ef24553faacda444ed5895e40ac8925ca0d1e
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This allows callers to determine why the revert
did not complete successfully
Change-Id: Ie44bb8523cac388b63748bc69ebdd3c3a3665d06
Signed-off-by: Kevin Sawicki <kevin@github.com>
The DfsReader must offer every representation of an object that
exists on the local repository when PackWriter asks for them. This
is necessary to identify objects in the thin pack part that are also
in the cached pack that will be appended onto the end of the stream.
Without looking at all alternatives, PackWriter may pack the same
object twice (once in the thin section, again in the cached base
pack). This may cause the command line C version to go into an
infinite loop when repacking the resulting repository, as it may see
a delta chain cycle with one of those duplicate copies of the object.
Previously the DfsReader tried to avoid looking at packs that it
might not care about, but this is insufficient, as all versions
must be considered during pack generation.
Change-Id: Ibf4a3e8ea5c42aef16404ffc42a5781edd97b18e
Consider two objects A->B where A uses B as a delta base, and these
are in the same source pack file ordered as "A B".
If cached packs is enabled and B is also in the cached pack that
will be appended onto the end of the thin pack, and both A, B are
supposed to be in the thin pack, PackWriter must consider the fact
that A's base B is an edge object that claims to be part of the
new pack, but is actually "external" and cannot be written first.
If the object reuse system considered B candidates fist this bug
does not arise, as B will be marked as edge due to it existing in
the cached pack. When the A candidates are later examined, A sees a
valid delta base is available as an edge, and will not later try to
"write base first" during the writing phase.
However, when the reuse system considers A candidates first they
see that B will be in the outgoing pack, as it is still part of
the thin pack, and arrange for A to be written first. Later when A
switches from being in-pack to being an edge object (as it is part
of the cached pack) the pointer in B does not get its type changed
from ObjectToPack to ObjectId, so B thinks A is non-edge.
We work around this case by also checking that the delta base B
is non-edge before writing the object to the pack. Later when A
writes its object header, delta base B's ObjectToPack will have
an offset == 0, which makes isWritten() = false, and the OBJ_REF
delta format will be used for A's header. This will be resolved by
the client to the copy of B that appears in the later cached pack.
Change-Id: Ifab6bfdf3c0aa93649468f49bcf91d67f90362ca
Packs can contain up to 2^32-1 objects, which exceeds the range of a
Java int. Try harder to accept higher object counts in some cases by
using long more often when we are working with the object count value.
This is a trivial refactoring, we may have to make even more changes
to the object handling code to support more than 2^31-1 objects.
Change-Id: I8cd8146e97cd1c738ad5b48fa9e33804982167e7
Shawn Pearce
Kevin Sawicki
Tomasz Zarna
Dave Borowitz
Robin Rosenberg
Christian Halstrick
Matthias Sohn
Jens Baumgart
Robin Stocker
Sasa Zivkov