This change is based on http://egit.eclipse.org/r/#change,1652
by David Green. The change adds the concept of a CredentialsProvider
which can be registered for git transports and which is
responsible to return credential-related data like passwords and
usernames. Whenenver the transports detects that an authentication
with certain credentials has to be done it will ask the
CredentialsProvider for this data. Foreseen implementations for
such a Provider may be a EGitCredentialsProvider (caching
credential data entered e.g. in the Clone-Wizzard) or a NetRcProvider
(gathering data out of ~/.netrc file).
Bug: 296201
Change-Id: Ibe13e546b45eed3e193c09ecb414bbec2971d362
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: David Green <dgreen99@gmail.com>
The auth-scheme token (like "Basic" or "Digest") is not specified in a
case sensitive way. RFC2617 (http://tools.ietf.org/html/rfc2617) specifies
in section 1.2 the use of a "case-insensitive token to identify the
authentication scheme". Jetty, for example, uses "basic" as token.
Change-Id: I635a94eb0a741abcb3e68195da6913753bdbd889
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Test was broken by commit b087bba3 changing formatting of merge
commit messages.
Change-Id: I98b1b936b9b6cbaa50fbc59d243a43e66a6ee9f9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We stopped handling URIs such as "example.com:/some/p ath", because
this was confused with the Windows absolute path syntax of "c:/path".
Support absolute style scp URIs again, but only when the host name
is more than 2 characters long.
Change-Id: I9ab049bc9aad2d8d42a78c7ab34fa317a28efc1a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This reverts commit 1e510ec20e.
Instead work around the warning by defining our constant by
constructing it through a StringBuilder.
Change-Id: If139509e769d649609c62eff359ebaea5dd286b2
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Matthias Sohn <matthias.sohn@sap.com>
CC: Chris Aniszczyk <caniszczyk@gmail.com>
IndexDiff was extended to detect files which are both removed from the
index and untracked. Before this change these files were only added
to the removed collection.
Change-Id: I971d8261d2e8932039fce462b59c12e143f79f90
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
jgit.sh <command> --help was not working for the commands Diff
and ShowCommands because of missing metaVar information. Missing
information is added here.
Change-Id: I0ab7e35006b6aa7d4326a634309dddfcdb78f2a6
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Implementation delegates all work to the AddCommand class and,
therefore, supports only those options currently supported by the
AddCommand which means: --update and the filepattern... arguments.
Change-Id: I4827d37e08b4c988c2458d9ba60a61b6ad414d10
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
The code analyzer can't know that passing a value known to be null is
not a problem. Hence better pass null explicitly instead of the
parameters being null.
Change-Id: I8db6f8014de6c00dd95974d60f61ecc66191e6d4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
There was a bug in ResolveMerger which is one reason for
bug 328841. If a merge was failing because of conflicts
deletions where not handled correctly. Files which have
to be deleted (because there was a non-conflicting deletion
coming in from THEIRS) are not deleted. In the
non-conflicting case we also forgot to delete the file but
in this case we explicitly checkout in the end these files
get deleted during that checkout.
This is fixed by handling incoming deletions explicitly.
Bug: 328841
Change-Id: I7f4c94ab54138e1b2f3fcdf34fb803d68e209ad0
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
The automatically generated commit message of a merge should have the
same structure as in C Git for consistency (as per git fmt-merge-msg).
Before this change:
merging refs/heads/a into refs/heads/master
After:
Merge branch 'a'
Plurals, "into" and joining by "," and "and" also work.
Change-Id: I9658ce2817adc90d2df1060e8ac508d7bd0571cb
When --git-dir=X is given JGit creates a bare repository in the
directory X. However, when the --bare option is not explicitly
given, this is not properly reflected in the X/config file i.e.
the bare=true is missing. This change fixes this minor issue.
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
There were also some compiler warning due to empty catch blocks that
were fixed.
Change-Id: I165bcddcdfacd34f020d1b938a41954916eb106e
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
The JGit merge algorithm or the Merge Command may have problems with handling
deletions always correctly. Therefore one additional test is added to check
this.
Change-Id: Id6aa49136996b29047c340994fe7faba68858e8c
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
JGit merge algorithm behaved differently from C Git when
we had adjacent modifications. If line 9 was modified by
OURS and line 10 by theirs then C Git will return a
conflict while JGit was seeing this as independent
modifications. This change is not only there to achieve
compatibility, but there where also some really wrong
merge results produced by JGit in the area of adjacent
modifications.
Change-Id: I8d77cb59e82638214e45b3cf9ce3a1f1e9b35c70
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Introduced similar helper methods than in AbstractDiffTestCase.
Then the test cases are much smaller and better understandable.
Change-Id: I2beb4db5a93bd8c0c1238d5d3039cbd6719eee90
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When adding a new method near the end of the sequence we want to
show the full method inserted, and not tear the prior method due
to the common trailing curly brace being consumed as part of the
common end region of the sequences.
Bug: 328895
Change-Id: I233bc40445fb5452863f5fb082bc3097433a8da6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This test isn't that useful. The better way to evaluate diff
algorithm performance is to run `jgit debug-diff-algorithms` over
real-world repositories, such as linux-2.6.git. Whenever we modify
an algorithm we should manually verify that its runtime performance
doesn't get any worse than it already is.
Change-Id: I0beed3a5a8a537c958a5a6438a1283f97fa2097a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
HistogramDiff failed on cases where the initial element for the LCS
was actually very common (e.g. has 20 occurrences), and the first
element of the inserted region after the LCS was also common but
had fewer occurrences (e.g. 10), while the LCS also contained a
unique element (1 occurrence).
This happens often in Java source code. The initial element for
the LCS might be the empty line ("\n"), and the inserted but common
element might be "\t/**\n", with the LCS being a large span of
lines that contains unique method declarations. Even though "/**"
occurs less often than the empty line its not a better LCS if the
LCS we already have contains a unique element.
The logic in HistogramDiff would normally have worked fine, except I
tried to optimize scanning of B by making tryLongestCommonSequence
return the end of the region when there are matching elements
found in A. This allows us to skip over the current LCS region,
as it has already been examined, but caused us to fail to identify
an element that had a lower occurrence count within the region.
The solution used here is to trade space-for-time by keeping a
table of A positions to their occurrence counts. This allows the
matching logic to always use the smallest count for this region,
even if the smallest count doesn't appear on the initial element.
The new unit test testEdit_LcsContainsUnique() verifies this new
behavior works as expected.
Bug: 328895
Change-Id: Id170783b891f645b6a8cf6f133c6682b8de40aaf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fixes the "Method ignores results of InputStream.read()" warning.
This is the only place where read() was used instead of readFully()
and the return value was not checked. So it was either an oversight
or should be documented. This change assumes it was an oversight.
Change-Id: I859404a7d80449c538a552427787f3e57d7c92b4
The value was accessed every time in the loop body with get(),
so use the more efficient entrySet().
Change-Id: I91d90cbd0b0d03ca4a3db986c58b8d80d80f40a4
This was already disabled in the Eclipse preferences for the project.
With this, Hudson should also ignore it.
Change-Id: I7a6b9a20451dc5ba9a61553248b5f4b6c6c7a78b
As described in Bug 328551 there was a bug that the merge algorithm
was not always reporting conflicts when the same line was deleted
and modified. This problem was introduced during commit
0c017188b4 when reported conflicts have
been checked for common pre- and suffixes.
This was fixed here by better determining whether after stripping
off common prefixes and suffixes from a conflicting region there
is still some conflicting part left.
I also added a unit test to test this situation.
Bug: 328551
Change-Id: Iec6c9055d00e5049938484a27ab98dda2577afc4
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Shawn O. Pearce
Stefan Lay
Matthias Sohn
Jens Baumgart
Christian Halstrick
Chris Aniszczyk
Sasa Zivkov
Robin Stocker
Mathias Kinzler