So far the git configuration and the system wide git configuration were
always reloaded when jgit accessed these global configuration files to
access global configuration options which are not in the context of a
single git repository. Cache these configurations in SystemReader and
only reload them if their file metadata observed using FileSnapshot
indicates a modification.
Change-Id: I092fe11a5d95f1c5799273cacfc7a415d0b7786c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The existing javadoc was copied from another method and not adapted.
Change-Id: I39a7e5d719b2c379de9bd1a4710a55a73700c6f0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The "Location" header in a redirect response may contain a relative
URI. Resolve it against the URI the request was made.
Bug: 550033
Change-Id: I29de07dfbbbc794090821b7c190cb2cf662c5a60
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The algorithm for finding keys was already improved in commit db0eb9f8,
but that wasn't quite correct yet.
If there is no pubring.kbx but a private-keys-v1.d directory and a
pubring.gpg, GPG also uses pubring.gpg in combination with the
private-keys-v1.d directory. GPG has three ways to locate public and
private key pairs:
* pubring.kbx and private-keys-v1.d (GPG >= 2.1)
* pubring.gpg and private-keys-v1.d (GPG >= 2.1)
* pubring.gpg and secring.gpg (GPG < 2.1)
See [1] and [2]. pubring.kbx may not exist if the user migrated from
an older GPG installation and didn't run the agent. Since we don't
know which GPG version the user has we must try secring.gpg also if
we found the public key in pubring.gpg, but didn't find the secret
key in the private key directory. Note that GPG < 2.1 also may have
a private key directory, used by the agent. But it may also _not_ have
that directory.
[1] https://lists.gnupg.org/pipermail/gnupg-users/2015-December/054881.html
[2] https://www.gnupg.org/faq/whats-new-in-2.1.html#nosecring
Bug: 549439
Change-Id: I6088014b16c585b6a3408bb31dba3c116e6b583d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
- fix handling of interrupts in FileStoreAttributes#saveToConfig
- increase retry wait time to 100ms
- don't wait after last retry
- dont retry if failure is caused by another exception than
LockFailedException
Change-Id: I108c012717d2bcce71f2c6cb9cf0879de704ebc2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Practically we wouldn't have 2GB+ objects in the DfsBlockCache, but by
making it long, we can clean up some long-to-integer conversions.
Change-Id: I1217f5f273a1420d80e2307ac9ff4a52460237a2
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
The position is anyway aligned in BlockBasedFile, so this is no-op.
Change-Id: Iba037e0ecff339393dd2c03fc5ae4fe858031e4f
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
This makes DfsBlockCache methods more unified. Also this reduces a magic
number embedded in DfsBlockCache.
Change-Id: I61e6c93ca283c0395738103bd2d94091edbccd4e
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
The method org.eclipse.jgit.util.FS.supportsAtomicCreateNewFile()
should default to true as mentioned in docs [1]
org.eclipse.jgit.util.FS_POSIX.supportsAtomicCreateNewFile() method
will set the value to false if the git config
core.supportsatomiccreatenewfile is not set.
It should default to true if the configuration is undefined.
[1]
4169a95a65/org.eclipse.jgit/src/org/eclipse/jgit/util/FS_POSIX.java (L372)
Bug: 544164
Change-Id: I16ccf989a89da2cf4975c200b3228b25ba4c0d55
Signed-off-by: Vishal Devgire <vishaldevgire@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We can't add this method to the super class StoredConfig since that
abstracts from filesystem storage. MockSystemReader.MockConfig is a
StoredConfig and is also used by tests for dfs based storage. Hence
remove this leaky abstraction.
This implies we always use the fallback FileStoreAttributes which means
a config file modification is considered racy within the first 2
seconds. This should not be an issue since typically configs change
rarely and re-reading a config within the racy period is relatively
cheap since configs are small.
Change-Id: Ia2615addc24a7cadf3c566ee842c6f4f07e159a5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If no OpenPGP key is found in pubring.kbx, try the legacy secring.gpg.
This appears to be consistent with GPG[1].
[1] https://lists.gnupg.org/pipermail/gnupg-users/2015-December/054881.html
Bug: 549439
Change-Id: I1557fd9b1f555a9b521fcd57cd3caccbdbacbeda
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Comparing with UTF_8 constant in StandardCharsets doesn't require to use
equals.
Change-Id: I6c73a929367f32c9e76ce99f6c0af268480d9230
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It's not important to update time field, scalability is more important
than perfect LRU ordering of cache entries.
Change-Id: I22466c580cd3613b81e1989130b2724af9d6c466
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Implement a helper method suppressing the ReferenceEquality error prone
warning and use it to fix this warning in static equals methods where
this comparison is used to implement fast path of static equals
implementation.
See https://errorprone.info/bugpattern/ReferenceEquality
Change-Id: I33538a3406007d24efec3a504e031ca1069572ed
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Move the implementation of the static equals() method to a new method
and suppress the error. Deprecate the old method to signal that we
intend to remove it in the next major release.
See https://errorprone.info/bugpattern/AmbiguousMethodReference
Change-Id: I5e29c97f4db3e11770be589a6ccd785e2c9ac7f2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Error Prone reports:
[ReferenceEquality] Comparison using reference equality instead of
value equality
The END_EDIT instance is used as a marker, and thus it's OK to use
a reference equality comparison. Factor the comparison to a method
and add a suppression.
Change-Id: I7d9dc1fa21f46c984787056b0b5d163e313026a6
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Error Prone reports:
[NarrowingCompoundAssignment] Compound assignments from long to int
hide lossy casts
and
[NarrowingCompoundAssignment] Compound assignments from int to byte
hide lossy casts
See https://errorprone.info/bugpattern/NarrowingCompoundAssignment
Fix the warnings by adding explicit casts or changing types as
necessary.
Now that all occurrences of the warning are fixed, increase its
severity to ERROR.
Change-Id: Idb3670e6047b146ae37daee07212ff9455512623
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Android unconditionally throws a SecurityException;[1] getFileStore()
is not supported. Catch the exception and don't attempt the hard-
linking atomic file mechanism.
[1] https://android.googlesource.com/platform/libcore/+/21e6175e25
Bug: 548947
Change-Id: Idfba2d9dbcbc80ea15ab2ae7889e5142444c1581
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Increase the safety factor to 2.5x for extra safety if max of measured
timestamp resolution and measured minimal racy threshold is < 100ms, use
1.25 otherwise since for large filesystem resolution values the
influence of finite resolution of the system clock should be negligible.
Before, not yet using the newly introduced minRacyThreshold measurement,
the threshold was 1.1x FS resolution, and we could issue the
following sequence of events,
start
create-file
read-file (currentTime)
end
which had the following timestamps:
create-file 1564589081998
start 1564589082002
read 1564589082003
end 1564589082004
In this case, the difference between create-file and read is 5ms,
which exceeded the 4ms FS resolution, even though the events together
took just 2ms of runtime.
Reproduce with:
bazel test --runs_per_test=100 \
//org.eclipse.jgit.test:org_eclipse_jgit_internal_storage_file_FileSnapshotTest
The file system timestamp resolution is 4ms in this case.
This code assumes that the kernel and the JVM use the same clock that
is synchronized with the file system clock. This seems plausible,
given the resolution of System.currentTimeMillis() and the latency for
a gettimeofday system call (typically ~1us), but it would be good to
justify this with specifications.
Also cover a source of flakiness: if the test runs under extreme load,
then we could have
start
create-file
<long delay>
read
end
which would register as an unmodified file. Avoid this by skipping the
test if end-start is too big.
[msohn]:
- downported from master to stable-5.1
- skip test if resolution is below 10ms
- adjust safety factor to 1.25 for resolutions above 100ms
Change-Id: I87d2cf035e01c44b7ba8364c410a860aa8e312ef
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since we now measure file time resolution we can use it to replace the
hard coded wait time of 25ms. FileSnapshot#equals will return true until
the mtime of the old (o) and the new FileSnapshot (n) differ by at least
one file time resolution.
Change-Id: Icb713a80ce9eb929242ed083406bfb6650c72223
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Cache FileStoreAttributeCache entries since looking up FileStore for a
file may be expensive on some platforms.
Implement a simple LRU cache based on ConcurrentHashMap using a simple
long counter to order access to cache entries.
Change-Id: I4881fa938ad2f17712c05da857838073a2fc4ddb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
Use the fallback timestamp resolution as already described in the
javadoc of these methods. Using zero file timestamp resolution doesn't
make sense.
Change-Id: Iaad2a0f99c3be3678e94980a0a368181b6aed38c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
To enable persisting the minimal racy threshold per FileStore add a
new config option to the user global git configuration:
- Config section is "filesystem"
- Config subsection is concatenation of
- Java vendor (system property "java.vendor")
- Java version (system property "java.version")
- FileStore's name, on Windows we use the attribute volume:vsn instead
since the name is not necessarily unique.
- separated by '|'
e.g.
"AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"
The same prefix is used as for filesystem timestamp resolution, so
both values are stored in the same config section
- The config key for minmal racy threshold is "minRacyThreshold" as a
time value, supported time units are those supported by
DefaultTypedConfigGetter#getTimeUnit
- measure for 3 seconds to limit runtime which depends on hardware, OS
and Java version being used
If the minimal racy threshold is configured for a given FileStore the
configured value is used instead of measuring it.
When the minimal racy threshold was measured it is persisted in the user
global git configuration.
Rename FileStoreAttributeCache to FileStoreAttributes since this class
is now declared public in order to enable exposing all attributes in one
object.
Example:
[filesystem "AdoptOpenJDK|11.0.3|/dev/disk1s1"]
timestampResolution = 7000 nanoseconds
minRacyThreshold = 3440 microseconds
Change-Id: I22195e488453aae8d011b0a8e3276fe3d99deaea
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
By running FileSnapshotTest#detectFileModified we found that the sum of
measured filesystem timestamp resolution and measured clock resolution
may yield a too small interval after a file has been modified which we
need to consider racily clean. In our tests we didn't find this behavior
on all systems we tested on, e.g. on MacOS using APFS and Java 8 and 11
this effect was not observed.
On Linux (SLES 15, kernel 4.12.14-150.22-default) we collected the
following test results using Java 8 and 11:
In 23-98% of 10000 test runs (depending on filesystem type and Java
version) the test failed, which means the effective interval which needs
to be considered racily clean after a file was modified is larger than
the measured file timestamp resolution.
"delta" is the observed interval after a file has been modified but
FileSnapshot did not yet detect the modification:
"resolution" is the measured sum of file timestamp resolution and clock
resolution seen in Java.
Java version filesystem failures resolution min delta max delta
1.8.0_212-b04 btrfs 98.6% 1 ms 3.6 ms 6.6 ms
1.8.0_212-b04 ext4 82.6% 3 ms 1.1 ms 4.1 ms
1.8.0_212-b04 xfs 23.8% 4 ms 3.7 ms 3.9 ms
1.8.0_212-b04 zfs 23.1% 3 ms 4.8 ms 5.0 ms
11.0.3+7 btrfs 98.1% 3 us 0.7 ms 4.7 ms
11.0.3+7 ext4 98.1% 6 us 0.7 ms 4.7 ms
11.0.3+7 xfs 98.5% 7 us 0.1 ms 8.0 ms
11.0.3+7 zfs 98.4% 7 us 0.7 ms 5.2 ms
Mac OS
1.8.0_212 APFS 0% 1 s
11.0.3+7 APFS 0% 6 us
The observed delta is not distributed according to a normal gaussian
distribution but rather random in the observed range between "min delta"
and "max delta".
Run this test after measuring file timestamp resolution in
FS.FileAttributeCache to auto-configure JGit since it's unclear what
mechanism is causing this effect.
In FileSnapshot#isRacyClean use the maximum of the measured timestamp
resolution and the measured "delta" as explained above to decide if a
given FileSnapshot is to be considered racily clean. Add a 30% safety
margin to ensure we are on the safe side.
Change-Id: I1c8bb59f6486f174b7bbdc63072777ddbe06694d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
These are useful to avoid typos, and also for tab completion.
Change-Id: I0f2d267e46b36bc40297c9657c447f3fd8b9f831
Signed-off-by: David Turner <dturner@twosigma.com>
In a subsequent patch, in some cases, PackWriter#writePack will be
responsible for both the "packfile-uris" and "packfile" sections,
meaning that (in these cases) it must write the "packfile" section
header itself.
In preparation for that patch, move the writing of the "packfile"
section header closer to the invocation of PackWriter#writePack when the
entire fetch response is configured to use the sideband. This means that
"packfile" is written *after* objects are counted (and progress messages
sent to the client in sideband 2) when the "sideband-all" feature is
used (whether "packfile-uris" is used or not), and written *before*
objects are counted otherwise.
Having code to write "packfile" in two places is unfortunate but
necessary. When "sideband-all" is not used, object counting has to
happen after "packfile" is written, because "packfile" activates the
sideband that allows counting progress to be transmitted. When
"packfile-uris" is used, object counting has to happen before "packfile"
is written, because object counting determines whether to send
"packfile-uris" or "packfile". When "sideband-all" is used but
"packfile-uris" is not used, either way works; this commit uses
"packfile-uris" behavior in this case.
Also make the naming of the sideband-activating methods in PacketLineOut
more consistent.
Change-Id: Ifbfd26cc26af10c41b77758168833702d6983df1
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
We should not list the complete cache but only show the cache entry at
hand.
Change-Id: I22be2a4dcbf0145155e23f2389bfcf5662cf23a6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Repeat the test 10000 times to get statistics if measured
fsTimestampResolution is working in practice to detect racy git
situations.
Add a class to compute statistics for this test. Log delta between
lastModified and time when FileSnapshot failed to detect modification.
This happens if the racy git limit determined by measuring filesystem
timestamp resolution and clock resolution is too small. If it would be
correct FileSnapshot would always detect modification or mark it
modified if time since modification is smaller than the racy git limit.
Change-Id: Iabe7af1a7211ca58480f8902d4fa4e366932fc77
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The newly introduced ProtocolV2HookChain is implemented using lists
instead of arrays.
Update PostUploadHookChain to keep the hook chains implementation
consistent.
Change-Id: I5ae0c923f117ac48558a989464f5d5d868d81f76
Signed-off-by: Ivan Frade <ifrade@google.com>
The newly introduced ProtocolV2HookChain is implemented using lists
instead of arrays.
Update PostUploadHookChain to keep hook chain implementations
consistent.
Change-Id: Ic5694feab943e8949896b93103dbf427716c9bd7
Signed-off-by: Ivan Frade <ifrade@google.com>
Set synchronized to make the config access consistent.
> Inconsistent synchronization of
org.eclipse.jgit.transport.JschConfigSessionFactory.config; locked 80%
of time
In order to make JschConfigSessionFactory threadsafe, synchronize this
method as well.
Change-Id: I32d1bfc2e98363d254992144e795ce72fe1e8846
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Measure granularity of timestamps stored in the filesystem by setting
and then getting lastModified timestamp until the read value changed.
Increase increment exponentially to limit number of iterations starting
with 1 microsecond since Java's FileTime (up to Java 12) truncates
timestamps to 1 microsecond resolution. The chosen algorithm yields 2000
steps between 1 ms and 2.5 s.
Also measure clock resolution and add that for the total timestamp
resolution. This avoids systematic measurement errors introduced by
doing IO to touch a file.
Change-Id: I9b37138619422452373e298d9d8c7cb2c384db3f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We should not use configuration when creating FileSnapshot when
accessing FileBasedConfig.
Change-Id: Ic521632870f18bb004751642b9d30648dd94049a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A caller cannot install a second hook in the UploadPack without
overwriting whatever is already there.
Offer a method to get the current protocol v2 hook, so it can be chained
with new hooks.
Change-Id: Icb06f94ec52b8c8714f509b5b8622d6db42960fb
Signed-off-by: Ivan Frade <ifrade@google.com>
UploadPack only supports one protocol-v2 hook. There are already cases
where more than one is needed.
Offer a Chain class to compose ProtocolV2Hooks, as other hooks do. It
looks like a single hook but it calls all its members.
Change-Id: Idd173ca7df6672079ac0de03c67f77abac376538
Signed-off-by: Ivan Frade <ifrade@google.com>
Anton Khodos
Matthias Sohn
Thomas Wolf
Masaya Suzuki
Vishal Devgire
David Pursehouse
Han-Wen Nienhuys
David Turner
Jonathan Tan
Ivan Frade