This also properly removes the newly determinded lane position from the
freePositions set in handleBlockedLanes(). closeLane() does only recycle
active lanes, to avoid recycling lanes twice.
Change-Id: Icd019fcf7974441ed05686bb61d6de4e8bf4ab7c
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Adds support for Negotiate(SPNEGO) HTTP authentication method. This method
is set to have a higher priority as Digest HTTP authentication method.
Bug: 428836
Change-Id: Ib181096d39f538df1dd7d3f36516843777bf12ae
Signed-off-by: Laurent Goujon <lgoujon@twitter.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Refactors HttpAuthMethod to support more authentication methods,
still sorted by priority orders.
Bug: 428836
Change-Id: I049c1742e7afbc51f3f6033fa4d471b344813cfa
Signed-off-by: Laurent Goujon <lgoujon@twitter.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Sun HttpURLConnection is able to handle authentication like SPNEGO without
caller intervention. However, there are some restrictions:
- do not need user direct input (user,password for example)
- it doesn't work when request body is chunked/streamed (because it cannot be
replayed)
Unfortunately there is no real way to leverage HttpURLConnection authentication
work as the authentication header is stripped off the request before returning
to the caller. There's also no way to explicitly disable authentication in
HttpURLConnection (SPNEGO auth will always be attempted if a valid token can be
created by GSSAPI).
This is an issue for jgit since it is expected that the first request will be
used to detect authentication method, and reuse for the subsequent requests.
This patch modifies TransportHTTP to detect authentication done in the background
by HttpURLConnection and sets the jgit authentication method accordingly so it will
always work for future requests (assuming that the authentication method used by
HttpURLConnection is also supported by jgit).
Bug: 428836
Change-Id: I79f3b70ca2b8377e20da8e6a01914e43e96595ce
Signed-off-by: Laurent Goujon <lgoujon@twitter.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Adds a factory class for GSSManager. GSSManager is already a factory class but
it doesn't work well with SPNEGO HTTP authentication unless the
javax.security.auth.useSubjectCredsOnly system property is set to false.
On Sun JDK, Sun GSSManagerImpl can be configured directly for SPNEGO auth
(without setting any system property). For a better experience, the class
availability is detected by reflection and used instead.
Detection is only done once, and fallbacks to org.ietf.jgss.GSSManager.
Bug: 428836
Change-Id: Idb9123d1f4013966919db43043ec959d4b133ae2
Signed-off-by: Laurent Goujon <lgoujon@twitter.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
This partially reverts 6de12836d7.
Performing a TreeWalk over 2 trees to identify and skip unmodified
subtrees to pass all blame onto an ancestor appears to be a micro
optimization that works for a very limited number of files. In the
general case the 2 tree walk is slowing down blame more than it helps
to speed it up.
I keep coming up with files in multiple repositories where 6de128 is
making things worse, not better, and only one example where it
actually improved performance, render_view_impl.cc in chromium
as described in the commit message.
Change-Id: Ic6d5fff22acb5ab6485614a07bdb388e8c336679
By specifying a mainline parent, a merge is cherry picked as if this
parent was its only parent. If no mainline parent is given, cherry
picking merges is not allowed, as before.
Change-Id: I391cb73bf8f49e2df61428c17b40fae8c86a8b76
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Adds further tests where the working tree is dirty (differs from
index) and where we have staged but uncommitted changes.
Fixed the test case 9 for file/directory conflicts.
Bug: 428819
Change-Id: Ie44a288b052abe936ebb74272d0fefef3b218a7a
Signed-off-by: Axel Richard <axel.richard@obeo.fr>
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
C git tries to read this file from the rebase state directory and
complains about it not being there for rebases started by JGit. An empty
'quiet' file represents the (verbose) default.
Change-Id: I1844ccbf8d35442d7a8918b57b67eb9b9efd6352
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Previously, it was only possible to archive the entire repository.
This patch introduces the ability to select specific files and
directories to archive.
Archiving the entire repository remains the default behaviour.
org.eclipse.jgit.api.ArchiveCommand: Adding setPaths(String... paths)
method.
Change-Id: Iedcd40fbfd71238b0088174bbe2717fae196e047
Signed-off-by: Shaul Zorea <shaulzorea@gmail.com>
In two places we threw an IOException and the message was built using
JGitText.couldNotWriteFile. We specified 2 parameters, but this pattern
expects only one parameter. In both places we tried to rename a file,
that's why we wanted two parameters (src and target) for the exception
text.
I changed it to use JGitText.renameFileFailed which accepts two
parameters and fits better.
Change-Id: Ib8c2cf78f2b26ca2b97754fe91fdb20b30392415
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: I587aae0ad217ed092f061682ffa66c724f221096
Signed-off-by: Tomasz Zarna <tomasz.zarna@tasktop.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- don't mark them as singleton to allow coexistence of multiple versions
in the same installation
- add missing version qualifier to Eclipse-SourceBundle header
see
https://dev.eclipse.org/mhonarc/lists/cross-project-issues-dev/msg10524.html
Change-Id: Ie4e028038f5a1d3e18b0be06c3d2ea82e7f9068d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Previously, setting any TreeFilter on a RevWalk triggered parent
rewriting, which in the current StartGenerator implementation ends up
buffering the entire commit history in memory. Aside from causing poor
performance on large histories, this does not match the default
behavior of `git rev-list`, which does not rewrite parent SHAs unless
asked to via --parents/--children.
Add a new method setRewriteParents() to RevWalk to disable this
behavior. Continue rewriting parents by default to maintain backwards
compatibility.
Change-Id: I1f38e05526071c75ca58095e312663de5e6f334d
Using the lane position and other data for equals/hashCode is not
useful.
Change-Id: I7af151d8a84544a77a486474c8ac71dd80090c66
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
When blaming a merge commit with "Ignore whitespace changes" enabled,
don't discard blame candidates for other parents when we encounter a
parent that only has whitespace changes compared to the merge result.
The algorithm early prepares parents for blaming, removing the
appropriate blame regions from the list of regions still to blame. Only
at the end, the prepared blame candidates are submitted for blaming.
When looking at a non-first parent which only differs in whitespace to
the merge result, it submitted that parent, but only to blame it for the
(usually few) lines not already prepared to blame on other parents. Due
to an early return the blame candidates for the previous parents were
forgotten, leaving many lines unannotated.
bug: 433024
Change-Id: I43c9caf2078b92b05e652dbed2192568907bf199
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
When JGit uses bitmaps (which is the case after a gc), the push command
doesn't go through the code where MissingObjectExceptions are caught
for remote objects not found locally.
Fixed by removing earlier non-locally-found remote objects.
This was seen withing gerrit, see:
https://code.google.com/p/gerrit/issues/detail?id=2025
Bug: 426044
Change-Id: Ieda718a0530e3680036edfa0963ab88fdd1362c0
Signed-off-by: Jean-Jacques Lafay <jeanjacques.lafay@gmail.com>
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If remote name contains / or there was a branch directly under the
refs/remotes namespace (wrong) the computation of remote name and
suggested local branch name would fail. Fix this by looking at the
configured remotes. A ref under refs/remotes that does not match a
remote configuration is not considered a remote tracking branch anymore.
This patch does not fix all similar errors in EGit/JGit.
Bug: 411002
Bug: 400414
Change-Id: I2515a6ed05f9104c387ce4e43b24dae942ae2473
Instead of requiring the caller to know how to list remote
names or parse remote branch names, add a few utilities for
that.
Change-Id: Ib6b2403532f4abbce594a03c0b9da49d30b19f70
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
JGit caches the contents of the known_hosts file within JSch when
first started, and never attempts to re-read it. If the contents
change (such as when using Gerrit replication), the new host will
never be found.
On failures, try reloading the knonwn_hosts and retry the
connection, in addition to reloading the credentials.
Change-Id: I980c4f4003f2a48c71b9b47c51e640d1e7742f58
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Streaming packed deltas is so slow that it never feasibly completes
(it will take hours for it to stream a few hundred megabytes on
relatively fast systems with a large amount of storage). This
was indicated as a "failed experiment" by Shawn in the following
mailing list post:
http://dev.eclipse.org/mhonarc/lists/jgit-dev/msg01674.html
Change-Id: Idc12f59e37b122f13856d7b533a5af9d8867a8a5
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Currently the repo sub-command only "works", but the submodules will have .git
directories themselves, and lacks group support.
Change-Id: I88a6ee07109187c6c9bfd92a044775fcfb5befa6
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Skipping directly to the parent is already possible with an existing
helper method. Update the source path (to follow the rename) and then
use the existing code path to push the parent inside the current entry.
Change-Id: Icb1d49e53d14b599efc478990613625a9e058e09
Pass in the RevWalk and let the candidate decide how to prepare itself
for output. This removes the conditional for the missing sourceCommit,
as candidates missing a commit can override the method with a no-op.
Change-Id: I3fa19b8676dfd3c177583f8f42593b5000b5350d
Instead of updating the candidate's regionList field to iterate
through the linked list of regions, use a special purpose field
in the BlameGenerator. This allows the candidate to be unmodified.
Change-Id: I2cda031b59220ab603ef82050e741ecbbaa1953f
The computeRange method is inefficient for computing the entire file.
If the entire file was selected ask for the entire file.
Change-Id: I8b2dbf635e875cc125443dac50be121208646540
If the caller uses a BatchRefUpdate to execute these (e.g. fetch)
there may be more detailed status information inside of the command
that was used to execute it. Allow the caller to obtain that status
data from the ReceiveCommand version of the TrackingRefUpdate.
Change-Id: I47209377fb8fcef0346d7678f1ab27f4790b49bc
If the header and trailer are identical up to a single line on both
sides, return that REPLACE edit as the only result. No algorithm can
break down a REPLACE with height of 1.
Change-Id: I483c40e8790cc3e8b322ef6dfce2299491fd0ac7
With this commit running blame on render_view_impl.cc[1] saves
about 644 ms over prior versions, reducing the time about 4.5%.
Large projects often contain strands of commits where no changes
are made to a particular subtree. Blame used to dive recursively
into these subtrees to look for the blob and check if its SHA-1
was changed. In chromium/src[1] only 20% of the commits modify
the content/renderer subtree relevant for the file.
The recursivePath is necessary to check for '/' and remember
if common subtree elimination should be attempted. When a file
lives within a subtree the extra cost to check for unmodified
subtrees saves time. However for files in the root tree the
extra work incurred by TreeWalk is not worthwhile and would
significantly increase overall running time.
Now typical running times from an otherwise idle desktop:
real 0m13.387s 0m13.341s 0m13.443s
user 0m15.410s 0m15.220s 0m15.350s
previously:
real 0m14.085s 0m14.049s 0m13.968s
user 0m15.730s 0m15.820s 0m15.770s
[1] 34d6e5c5b4/content/renderer/render_view_impl.cc
Change-Id: Ib16d684df7ffa034ee28def3fb22c797998d5b7b
Avoid converting the raw mode to FileMode. This is an expensive
if-else-if sort of test to just check if the thing is a blob.
Instead test the bit mask directly, which is at least a few
instructions shorter.
The TreeWalk is already recursive and will auto-dive into any
subtrees found. isSubtree check is unnecessary, as is the loop,
as only one result will ever be returned by next().
Change-Id: I9fb25229ebed857469427bfbdf74aedebfddfac8
Ensure commit object names are unique by extending the default
abbreviation as long as necessary. This allows `jgit blame` to
more closely match the formatted output of `git blame` on large
histories like Gerrit Code Review's ReceiveCommits.java file.
Change-Id: I5f7c4855769ee9dcba973389df9e109005dcdb5b
Konrad Kügler
Matthias Sohn
Laurent Goujon
Shawn Pearce
Robin Rosenberg
Shaul Zorea
Christian Halstrick
Tomasz Zarna
Yuxuan 'fishy' Wang
Laurent Goubet
Dave Borowitz
Jean-Jacques Lafay
Bogdan Gheorghe
Doug Kelly