ObjectReader release method was replaced by close method but
WindowCursor was still implementing release method.
To prevent the same mistake again, make ObjectReader close method
abstract to force sub classes to implement it.
Change-Id: I50d0d1d19a26e306fd0dba77b246a95a44fd6584
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
When during a PushOperation the server hits an exception different from
UnpackException the JGit server behaved wrong. That kind of exceptions
are handled so late that the connection is already released and the
information whether to talk sideband to the client is lost. In detail:
ReceivePack.receive() will call release() and that will reset the
capabilities. But later on the stack in ReceivePackServlet.doPost() it
is tried to send a response to client now with reset capabilities (no
sideband!).
Change-Id: I0a609acc6152ab43b47a93d712deb65bb1105f75
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGits PushCommand and BasePackPushConnection were throwing generic
TransportExceptions when the pushed pack-file was rejected by the server
since it was too big. Let JGit better interprete the server's response
to detect this situation and throw a more specific exception.
This detection works by parsing the status line sent by the server. This
change only recognizes the response sent by a JGit based server. All
other servers which report such problems in a different way still lead
to a generic TransportExceptions.
Change-Id: Ic075764ea152939ce72c446252464620dd54edea
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The primary goal is to improve exception readability. Since this is a
standalone thread, just logging the stack trace of the caught
exception is not very useful:
java.io.IOException: Stream closed
at java.io.BufferedInputStream.getBufIfOpen(BufferedInputStream.java:162)
at java.io.BufferedInputStream.read(BufferedInputStream.java:258)
at org.eclipse.jgit.util.FS$2.run(FS.java:451)
Providing a named class eliminates the "FS$2", and including the
command name provides a little more context in the error message.
A future improvement might include the stack trace that created the
GobblerThread as well.
Change-Id: Ibf16d15b47a85b6f41844a177e398c2fc94f27b0
RevWalks to find commits that are not in bitmap indices are expensive.
Track the count of commits that are enumerated via RevWalks as "bitmap
index misses" in the PackWriter.Statistics class.
Change-Id: Ie0135a0a0aeba2dfb6df78839d545006629f16cb
Signed-off-by: Terry Parker <tparker@google.com>
The SimilarityIndex class implements the useful capability of scoring
the similarity between two files. That capability is required for a
feature that's being developed in another package, to detect files
derived from a set of potential sources.
This CL adds a public factory method to create a SimilarityIndex from
an ObjectLoader. It grants public access to the SimilarityIndex class,
the score method, an inner exception class and a special marker
instance of that exception class.
Change-Id: I3f72670da643be3bb8e261c5af5e9664bcd0401b
Signed-off-by: David Pletcher <dpletcher@google.com>
If the thread reading a pack file is interrupted don't invalidate that
pack file.
This could happen when Gerrit invoked JGit for computing a diff in one
thread and waited for the call to finish from another thread, with a
timeout. When the timeout was reached the "diff" thread was interrupted.
If it happened to be in an IO operation, reading a pack file, an
InterruptedIOException was thrown and the pack file was marked as
invalid and removed from the pack list.
Invalidating the pack in that case could cause the project disappearing in
Gerrit as discussed in [1] and [2].
[1] https://groups.google.com/forum/#!topic/repo-discuss/CYYoHfDxCfA
[2] https://groups.google.com/forum/#!topic/repo-discuss/ZeGWPyyJlrM
Change-Id: I2eb1f98370936b5be541d96d70c3973cbfc39238
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
Now that d7a4473 removed the gitprefix property, we did not have a way to
specify the path to the Git system config file in case
discoverGitSystemConfig() fails. Fix that by introducing a member variable
that caches the result of discoverGitSystemConfig() as well as a setter
method to overwrite the content of that variable.
Change-Id: Icd965bffbe2f11b18c9505ee2ddd2afad5b64d70
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Change-Id: I31e788ee20ac3e8439559d9060d39e9792f6dc7d
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Commit d3348e introduced few errors in Eclipse.
This commit cleans up the new API:
- fixes API error in RepoCommand after moving IncludedFileReader type
- fixes unused imports in RepoCommand & RepoCommandTest
- fix javadoc errors in ManifestParser & RepoProject
- makes three (implicitly final) fields in ManifestParser final.
Change-Id: I4185f451d97039d155391f62815bb9d3afe39fa6
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
The repo xml manifest parser used in RepoCommand could also be useful for
others, so refactor to make it public.
Also this breaks backward compatibility slightly.
Change-Id: I5001bd2fe77541109fe32dbe2597a065e6ad585e
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
The only purpose of the gitprefix logic was to determine the path to the
system-wide config file. This is now done by discoverGitSystemConfig()
independent of the gitprefix, so get rid of this unused code.
Change-Id: Iaa88df9bd066dc1ed4067c18618af809e49876b3
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Change-Id: I969e26a5ab5f8ca3ab29024f405c1e34afdba493
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: I4db7763826e4ada92074317d4d1c9a32299f3af8
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: I700540eec06efb24eeb09bfcb40420820c32d156
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: I67ec732ea2e5345a6946783f0c5ef60c07ce254e
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- use try-with-resource where possible
- replace use of deprecated release() by close()
Change-Id: I0f139c3535679087b7fa09649166bca514750b81
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
git-core has supported this for a long time; allowing clients to
avoid progress messages from the server if they are dumping to a
pipe instead of a tty.
Avoid the two progress monitors going on side-band and expose
isQuiet() method to allow hooks to also reduce their output if
this is sensible for them.
Change-Id: I1df7e38d16765446b441366500b017a90b8ff958
In 77030a5e, AutoClosable was implemented on classes that use release().
This caused a resource leak because the ObjectReader.close method was
not calling the now deprecated release method, which is the method that
sub classes implements to release resources.
Change-Id: I247651ec8fd7ca9941d256ca46d14cc43cc35c6e
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Although the stable-4.0 branch already exists, 4.0 development is
still happening on master until IP logs are sent for review, which
will happen at the end of May.
Change-Id: I863ba85c6303f8ef2eb13bca5e2d30e5d3c58b29
Signed-off-by: Jonathan Nieder <jrn@google.com>
While trying to decide between "which matches every object" and "as it
matches every object", I became distracted and wrote both.
Change-Id: I867ce29664e661a81a9d441e59ffd0b72270dd98
Signed-off-by: Jonathan Nieder <jrn@google.com>
This will make it possible to declare a collection of objects as
ineligible for the walk en masse, for example if they are known to be
uninteresting via a bitmap.
Change-Id: I637008b25bf9fb57df60ebb2133a70214930546a
Signed-off-by: Jonathan Nieder <jrn@google.com>
The Java GC doesn't always clear these before running out of memory
and failing allocations. In practice OpenJDK 7 is leaving these live,
removing any advantage of the SoftReference to attempt to shed memory
when the GC is unable to continue allocating.
Instead follow the pattern of the DfsBlockCache and use hard refs
to the object data. Require applications to configure the cache
size more accurately given expected memory usage.
Change-Id: I87586b3e71b1cba0308a6a278d42e971be4bccd3
The LRU chain management code was broken leading to situations where
the chain was incomplete. This prevented the cache from removing
items when it exceeded its memory target, causing a leak.
One case was repeated hit on the head of the chain. moveToHead(e)
was invoked linking the head back to itself in a cycle orphaning
the rest of the table.
Add some unit tests to cover this and a few other paths.
Change-Id: Ib27486eaa1b1d2bf1c745a56d0a5832bfb029322
As Chris pointed out change I822721c76c64e614f87a080ced2457941f53adcd
slowed down merge since ANY_DIFF filter is much less efficient than the
manual detection of diffs done in ResolveMerger.processEntry() since it
avoids unnecessary filesystem calls using the git index. Hence only set
the ANY_DIFF filter on bare repositories which don't have a working tree
to scan.
To test performance I used the setup described in Chris' comment on
change I822721c76c64e614f87a080ced2457941f53adcd and modified
ResolveMerger.mergeTrees() to not add the working tree in order to
simulate merging in a bare repository.
At least on Mac I couldn't detect a speedup, with and without the
ANY_DIFF filter merge test takes an average 0.67sec.
Change-Id: I17b3a06f369cee009490f54ad1a2deb6c145c7cf
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Avoid always calling `sh -c umask` on startup, instead deferring
the invocation until the first time a working tree file needs to
use the execute bit. This allows servers using bare repos to avoid
a costly fork+exec for a value that is never used.
Store the umask as an int instead of two Boolean. This is slightly
smaller memory (one int vs. two references) and makes it easier for
an application to force setting the umask to a value that overrides
whatever the shell told JGit.
Simplify the code to bail by returning early when canExecute is
false, which is the common case for working tree files.
Change-Id: Ie713647615bc5bdf5d71b731a6748c28ea21c900
Applications that use a commit message once and do not
need it again can free the body to save memory. Expose
the disposeBody() methods to support this and use it in
pgm.Log which only visits each commit once.
Change-Id: I4142a0749c24f15386ee7fb119934a0432234de3
This was added a very long time ago to support the failed
DHT storage implementation. Since then no storage system
was able to make use of this API, but it pollutes internals
of the walkers.
Kill the API on ObjectReader and drop the invocations from
the walker code.
Change-Id: I36608afdac13a6c3084d7c7e0af5e0cb22900332
Previously using an ObjectWalk meant uninteresting commits may keep
their commit message buffers in memory just in case they were found to
be on the boundary and were output as UNINTERESTING for the caller.
This was incorrect inside StartGenerator. ObjectWalk hides these
internal UNINTERESTING cases from its caller unless RevSort.BOUNDARY
was explicitly set, and its false by default. Callers never see one
of these saved uninteresting commits.
Change the test to allow early dispose unless the application has
explicitly asked for RevSort.BOUNDARY. This allows uninteresting
commit buffers to be discarded and garbage collected in ObjectWalks
when the caller will never be given the RevCommit.
Change-Id: Ic1419cc1d9ee95f4d09386dd0730d54c12dcc157
Despite being the primary author of RevWalk and ObjectWalk I still
fail to remember to setRetainBody(false) in application code using
an ObjectWalk to examine the graph.
Document the default for RevWalk is setRetainBody(true), where the
application usually wants the commit bodies to display or inspect.
Change the default for ObjectWalk to setRetainBody(false), as nearly
all callers want only the graph shape and do not need the larger text
inside a commit body. This allows some code in JGit to be simplified.
Change-Id: I367e42209e805bd5e1f41b4072aeb2fa98ec9d99
That more or less defeats the purpose of using a StringBuilder.
Change-Id: I519f7bf1c9b6670e63c3714210f834ee845dc69f
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Change-Id: I3145f74ecee9f5b368e7f4b9fd7cb906f407eff5
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If UploadPack or ReceivePack has an exception record an identifier
associated with the repository as part of the log message. This can
help the HTTP admin track down the offending repository and take
action to repair the root cause.
Change-Id: I58f22b33cdb40994f044a26fba9fe965b45be51d
Hugo Arès
Christian Halstrick
Dave Borowitz
Terry Parker
David Pletcher
Yuxuan 'fishy' Wang
Matthias Sohn
Saša Živkov
Andrey Loskutov
Sebastian Schuberth
Shawn Pearce
Jonathan Nieder