CGit just learned to always use OFS_DELTA when writing out bundle
files. This makes sense because bundle came about well after
OFS_DELTA was established, so any version of CGit that can read a
bundle file can also read OFS_DELTA. Since OFS_DELTA is smaller,
always use it when writing bundles.
Change-Id: I44f9921494798ea0c99e16eab58b87bebeb9aff5
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
RevWalk in JGit and the revision code in C Git both parse commits out
of the pack file in an order that differs from strict timestamp and
topological sorting. Both implementations pop a commit from the head
of a date queue, and then immediately parse all of its parents in
order to insert those into the date queue at the proper positions as
determined by their committer timestamp field. This implies that the
parents are parsed when their most recent child is popped from the
queue, and not where they are popped during traversal.
Hoisting a parent commit to be immediately behind its child improves
locality by making sure all parents of a merge are clustered together,
and thus can be paged into the parser by the pack file buffering
system (aka WindowCache in JGit) together.
Change-Id: I80f9e64cafa2e8f082776b43845edf23065386a2
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Previously, this method would not (always) work when a recursive path
such as "a/b" was passed into it.
Change-Id: I0752a1f5fc7fef32064d8f921b33187c0bdc7227
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
A checked Exception is thrown instead.
The reason for throwing an Exception is that the state of the
repository is inconsistent in this case: There is a merge
configuration containing a non-existing local branch. Ideally the
deletion of a local branch should also delete the corresponding
merge configuration.
Bug: 337315
Change-Id: I71e56ffb90e11e6e3c1bbd964ad63972d67990c0
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
As PackParser supports a progress meter for the "Resolving deltas"
phase of its work, we should export this to smart HTTP clients so
they know the server is still working on their (large) upload.
However this isn't as simple as just dropping in a binding for
the SmartOutputStream to flush when its told to. We want to
avoid spurious flushes triggered by the use of sideband, or the
status report formatting in the send-pack/receive-pack protocol.
Change-Id: Ibd88022a298c5fed0edb23dfaf2e90278807ba8b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some clients coming through proxies may advertise a different
Accept-Encoding, for example "Accept-Encoding: gzip(proxy)".
Matching by substring causes us to identify this as a false positive;
that the client understands gzip encoding and will inflate the
response before reading it.
In this particular case however it doesn't. Its the reverse proxy
server in front of JGit letting us know the proxy<->JGit link can
be gzip compressed, while the client<->proxy part of the link is not:
client <-- no gzip --> proxy <-- gzip --> JGit
Use a more standard method of parsing by splitting the value into
tokens, and only using gzip if one of the tokens is exactly the
string "gzip". Add a unit test to make sure this isn't broken in
the future.
Change-Id: I30cda8a6d11ad235b56457adf54a2d27095d964e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We also have org.eclipse.jgit.http--All-Tests, which matches the
style of the org.eclipse.jgit.core--All-Tests name. Drop the others
as these are just redundant duplicates.
Change-Id: I8600a343f6a85d21dc07bda68a8cb834c82946b5
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If a cached pack is used, it might know how many deltas are contained
within it. Record that count as part of our reusedDeltas field
for the stats line we show clients.
Change-Id: I1c61fb817305a95eeac654cccf132cba20b2339c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Like ReceivePack, callers that embed UploadPack within their
service may wish to see the set of references that were sent
to the client. We already have the map on hand, it just needs
to be exposed with a getter.
Change-Id: I123b23e475860d5bb968906bef59068985088b7b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The setMustExist() method allows callers to require the repository
exists in order for build() to succeed. This is useful within a
RepositoryResolver where existence is required.
Change-Id: I6a1154551435cf0da6c2b4a7f4dce266abea5dff
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
DHT based repository types don't use a java.io.File to name the
repository. Moving the type to a string starts to open up more types
of repository names, making the standard pgm package easier to reuse
on other storage systems.
Change-Id: I262ccc8c01cd6db88f832ef317b0e1e5db2d016a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Using a resolver and factory pattern for the anonymous git:// Daemon
class makes transport.Daemon more useful on non-file storage systems,
or in embedded applications where the caller wants more precise
control over the work tasks constructed within the daemon.
Rather than defining new interfaces, move the existing HTTP ones
into transport.resolver and make them generic on the connection
handle type. For HTTP, continue to use HttpServletRequest, and
for transport.Daemon use DaemonClient.
To remain compatible with transport.Daemon, FileResolver needs to
learn how to use multiple base directories, and how to export any
Repository instance at a fixed name.
Change-Id: I1efa6b2bd7c6567e983fbbf346947238ea2e847e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The UploadPackLogger interface allows applications that embed
GitServlet or otherwise use UploadPack to service clients to
track and log how PackWriter was used, and what it sent. This
provides more granularity into the request activity than might
be available from the HTTP server logs, helping administrators
to better understand utilization and Git server performance.
Change-Id: I1d36b060eb3385339d5f986e68192789ef70fc4e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the RevFilter doesn't actually require the commit body,
we shouldn't reparse it if the body was disposed. This happens
often inside of UploadPack during common ancestor negotation, the
RevWalk is reset and re-run over roughly the same commit space,
but the bodies are discarded because the commit message is not
relevant to the process.
Change-Id: I87b6b6a5fb269669867047698abf718d366bd002
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Applications like UploadPack reset() and reuse the same RevWalk
multiple times in very rapid succession. Releasing the ObjectReader's
internal state on each use, only to allocate it again on the next
cycle kills performance if the ObjectReader has internal caches, or
even if the Inflater gets returned and pulled from the InflaterCache
too frequently.
Making releasing the ObjectReader the application's responsibility
when it is done with the RevWalk, which most already do by wrapping
their loop in a try/finally block.
Change-Id: I3ad188a719e8d7f6bf27d1a7ca16d465534713f4
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When UploadPack has computed the merge base between the client's have
set and the want set, its already loaded and parsed all of the
interesting commits that PackWriter needs to transmit to the client.
Switching the RevWalk and its object pool over to be an ObjectWalk
saves PackWriter from needing to re-parse these same commits from the
ObjectDatabase, reducing the startup latency for the enumeration
phase of packing.
UploadPack doesn't want to use an ObjectWalk for the okToGiveUp()
tests because its slower, during each commit popped it needs to cache
the tree into the pendingObjects list, and during each reset() it
discards a bunch of ObjectWalk specific state and reallocates some
internal collections. ObjectWalk was never meant to be rapidly
reset() like UploadPack does, so its perhaps somewhat cleaner to allow
"upgrading" a RevWalk to an ObjectWalk.
Bug: 301639
Change-Id: I97ef52a0b79d78229c272880aedb7f74d0f7532f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The peeled reference information for tags is more efficient to
work with than parsing the tag objects, as usually its coming from
the packed-refs file, which stores the peeled information for us.
Rely on the peeled information to decide if the tag should be
included or not, instead of using our RevWalk to parse the object.
Change-Id: I6714a8560a1c04b5578e9c5b469ea3c77188dff3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When negotiate() starts there is at least one want, but no haves, and
thus no common base exists. Its not ok to give up yet, the client
should try to find a common base with the server. Avoid scanning our
history along the want chains until we have found at least one commit
in common with the client, this will trigger okToGiveUp to be set to
null, enabling okToGiveUp() to perform the scan.
Bug: 301639
Change-Id: I98a82a5424fd4c9995924375c7910f76ca4f03af
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the client presents a common commit on a side branch, and there is
a want for a disconnected branch UploadPack was walking back on the
entire history of the disconnected branch because it never would find
the common commit.
Limit our search back along any given want to be no earlier than the
oldest common commit received via a "have" line from our client. This
prevents us from looking at all of the project history.
Bug: 301639
Change-Id: Iffaaa2250907150d6efa1cf2f2fcf59851d5267d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
isOutdated returns true iff the memory state differs from the index
file.
Change-Id: If35db06743f5f588ab19d360fd2a18a07c918edb
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
When pulling into a local branch that has no upstream configuration,
pull should try to used the default remote ("origin") instead of
throwing an Exception.
Bug: 336504
Change-Id: Ife75858e89ea79c0d6d88ba73877fe8400448e34
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
If the command contains spaces, it needs to be evaluated by the remote
shell. Quoting the command breaks this, making it impossible to run a
remote command that needs additional options.
Bug: 336301
Change-Id: Ib5d88f0b2151df2d1d2b4e08d51ee979f6da67b5
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This gets non-commits out of the wantSatisfied() main loop by making
use of the cached SATISIFIED flag and its existing bypass. Anything
that isn't a commit cannot be discovered by the have negotiation, so
its always assumed to be SATISIFIED by the server.
Bug: 301639
Change-Id: I1ef354fbf2e2ed44c9020a4069d7179f2159f19f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the walker resets, its going to scrub the COMMON and SATISIFIED
flags off a commit if the commit is contained within another commit
the client wants. This is common if the client asks for both a
'maint' and 'master' branch, and 'maint' is also fully merged into
'master'.
COMMON shouldn't be scrubbed during reset because its used to control
membership of the commonBase collection, which is a List. commonBase
should technically be a set, but membership is cheaper with a RevFlag.
COMMON appears on a commit reachable from a WANT when there is also a
PEER_HAS flag present, as this is a merge base. Scrubbing this off
when another branch is tested isn't useful.
SATISIFIED is a cache to tell us if wantSatisified() has already
completed for this particular WANT. If it has, there isn't a need to
recompute on that branch. Scrubbing it off 'maint' when we test
'master' just means we would later need to re-test 'maint', wasting
CPU time on the server.
Bug: 301639
Change-Id: I3bb67d68212e4f579e8c5dfb138f007b406d775f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
okToGiveUpImp() has been missing a ! for a long time. This loop over
wantAll() is looking for an object where wantSatisfied() returns
false, because there is no common merge base present. Unfortunately
it was missing a !, causing the loop to break and return false after
at least one want was satisified.
Bug: 301639
Change-Id: Ifdbe0b22c9cd0a9181546d090b4990d792d70c82
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce
Chris Aniszczyk
Tomasz Zarna
Jesse Greenwald
Stefan Lay
Marc Strapetz
Mathias Kinzler
Matthias Sohn
Jens Baumgart