The tortoiseplink command does not understand -batch, even though
it smells like the putty plink command that does use it. Don't add
-batch if GIT_SSH is tortoiseplink.
Change-Id: I638532a02faa2caf8c39d482094e7ff4f4ec7e78
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When GIT_SSH is set to use plink, the correct option name is "-batch"
and not "--batch". This was a typo introduced when we added support
for plink via GIT_SSH.
Change-Id: I391660e38f5d208bba11e3f2a8f25922de2af878
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sasa pointed out we only ever use the length here, so instead of
holding onto the AbbreviatedObjectId, lets just hold onto the length
as a primitive int.
Change-Id: I2444f59f9fe5ddcaea4a3537d3f1064736ae3215
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Sasa Zivkov <zivkov@gmail.com>
JGit's internal implementation of the HTTP digest authentication
method wasn't conforming to RFC 2617 (HTTP Authentication: Basic
and Digest Access Authentication), resulting in authentication
failures when connecting to a digest protected site.
The code now more accurately matches section 3.2.2 (The Authorization
Request Header) from the standards document.
Change-Id: If41b5c2cbdd59ddd6b2dea143f325e42cd58c395
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The java.io.File methods for creating directories report failure by
returning false. To ease proper checking of return values provide
utility methods wrapping mkdir() and mkdirs() which throw IOException
on failure.
Also fix the tests to store test data under a trash folder and cleanup
after test.
Change-Id: I09c7f9909caf7e25feabda9d31e21ce154e7fcd5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
If DiffFormatter is asked to compare the index to the working tree,
it can go faster by using the cached stat information to compare
the two entries rather than relying on SHA-1 computation alone.
Change-Id: Icb21c15b8279ee8cee382e5e179e0cf8903aee4d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is needed to ensure interoperability with the command line: if
the git-rebase-todo file was created manually (by git rebase -i in the
command line), and any commands other than pick are used (reword,
edit, fixup, squash) JGit must abort as it does not understand these
commands yet.
The same is true if an unknown command is found (e.g. due to a typo);
this is the same behavior as shown by the command line.
Change-Id: I2322014f69460361f7fc09da223e8a5c31f100dd
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Always use streaming (for SHA-checksum & collision detection)
when indexing whole blobs, regardless of their size.
Positives:
* benefits of bugfix #312868 will apply to all runtimes, without
additional conf for mem-constrained JVMs (5MB huge for some)
* no byte array allocation
(re-uses readBuffer instead of allocating new full-size array)
* mildly better overall performance
(given the usual blob-does-not-need-collision-checking case)
* removes unnecessary code
Negative:
* doubles the disk IO for a blob comparision
(comparitively rare occurance)
I perf-tested a range of threshold sizes against a random selection
of packfiles I found on my harddrive, the results are here:
https://spreadsheets.google.com/ccc?key=tLCQElyyd2RKN9QevfvgwGQ&hl=en_GB#gid=1
My interpretation of the results is that the streaming size threshold
isn't beneficial (actually seems to be very slightly detrimental) -so
we should just get rid of it. This tallies with some of the comments
Shawn & I had for the default value of streamFileThreshold in the
review for I862afd4c:
http://egit.eclipse.org/r/#patch,sidebyside,2040,2,org.eclipse.jgit/src/org/eclipse/jgit/transport/IndexPack.java
The perf-test code is here: https://gist.github.com/735402
It's a bit scruffy but basically does 10 runs (in randomised order)
for each threshold size on various packfiles, waiting a second
between each pack-indexing to allow GC to catch up. I know it's not
perfect - proper perf testing is hard to do :-)
For convenience provide an option to skip deletion of non-existing
files. Also add some tests for deletion methods in FileUtils.
Change-Id: I33e355cfcdc19367d50208150ee49a4a06394890
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Sasa and I were reviewing this code today and Sasa pointed out we
can simplify the conflict logic, as the two cases (subtree and file)
are logically identical.
Change-Id: Ie0d40b2dd15605785eff453a846b1d20a2d021fc
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Sasa Zivkov <zivkov@gmail.com>
Rebase would update the original HEAD to the wrong commit when
"skipping" the last commit after a merged commit.
Includes a test for the specific situation.
Change-Id: I087314b1834a3f11a4561f04ca5c21411d54d993
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
If a treewalk walks also over index and the workingtree then the
IndexDiffFilter filter can be used which works much faster then
the semantically equivalent ANY_DIFF filter. This is because this
filter can better avoid computing SHA-1 ids over the content of
working-tree files which is very costly.
This fix will significantly improve the performance of e.g.
EGit's commit dialog.
Change-Id: I2a51816f4ed9df2900c6307a54cd09f50004266f
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
For --continue, the Rebase command asserts that there are no unmerged
paths in the current repository. Then it checks if a commit is needed.
If yes, the commit message and author are taken from the author_script
and message files, respectively, and a commit is performed before the
next step is applied.
For --skip, the workspace is reset to the current HEAD before applying
the next step.
Includes some tests and a refactoring that extracts Strings in the
code into constants.
Change-Id: I72d9968535727046e737ec20e23239fe79976179
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Instead of setting a boolean when a difference record is found, return
false from diff() only if all of the collections are empty. When all
of them are empty, no difference was found.
Change-Id: I555fef37adb764ce253481751071c53ad12cf416
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The isModified() is more efficient because it can skip over files that
are stat clean, without needing to scan them.
This is useful to efficently work on paths that were already staged
and thus differ between HEAD and the index, but not between the index
and the working tree.
Change-Id: I4418202e612f0571974e0898050d987c6c280966
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When comparing the ObjectIds for two tree entries its faster
to use the raw buffer compares over allocating ObjectIds and
then performing equals on their contents.
However, this also needs to consider the raw modes. It is possible
for a path to change modes but not ObjectId (e.g. making a file
executable), and in this case its still a staged change to report back
to the caller.
Change-Id: I1a267254c04b3273a97f63c71d1e6718cd9d2fa8
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the caller really needs the list of files that are flagged as
assume-unchanged (aka assume-valid in the DirCache), we should give
them the complete list and not just those that we wrongly identified
as being modified during diff().
This change is necessary because diff() is slightly broken and is
discovering differences on files that it shouldn't have considered.
Change-Id: Ibe464c1a0e51c19dc287a4bc5348b7b07f4d840b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The TreeWalk is configured to be recursive, which means subtrees are
never presented to the application. Therefore the working tree file
mode can never be a subtree/subdirectory at this point in the code.
Change-Id: Ie842ddc147957d09205c0d2ce87b25c566862fd9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of asking the individual iterators for their path string, use
the TreeWalk's generic getPathString() method. Its just as fast
because it uses the path of the current matching iterator.
Change-Id: I9b827fbbafce1c78f09d5527cdc64fbe9022a16e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We add either 3 or 4 filters. If we are adding only 3 filters,
allocating the array for 4 isn't a huge waste of memory, but it
does simplify our code.
Change-Id: I7df29b414f6d5cfcf533edb1405083e6fcec32cf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To improve runtime performance, caching the WorkingTreeOptions inside
of the Config object using the Config.SectionParser API allows
the WorkingTreeOptions to be accessed more efficiently whenever a
FileTreeIterator is constructed for the Repository.
Instead of passing the filemode handling option into isModified(),
the WorkingTreeIterator should always honor whatever setting has
been configured in this repository, as defined by its own copy of
the WorkingTreeOptions. This simplifies all of the callers as they
no longer need to lookup core.filemode on their own.
A few locations were changed from always using a hardcoded "true"
on the file mode to passing what is actually configured in the
repository. This is a behavior change, but corrects what should be
considered to be bugs as the core.filemode variable wasn't always
being used.
Change-Id: Idb176736fa0dc97af372f1d652a94ecc72fb457c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When indexing large blobs that are stored whole (non-delta form),
avoid allocating the entire blob in memory and instead stream it
through the SHA-1 checksum computation. This reduces the size
of memory required by IndexPack when processing very big blobs,
such as a 500 MiB uncompressable binary.
If the large blob already exists in the local repository, its
contents needs to be compared byte-for-byte after the entire pack
has been indexed, to ensure there isn't an unexpected SHA-1 collision
which may result in later data corruption. This compare is performed
as a streaming compare, again avoiding the large object allocation.
This change doesn't improve on memory utilization for large objects
stored as deltas. The change also doesn't improve handling for
any large commits, trees or annotated tags. There isn't much to
be done here for those objects, because they need to be passed down
to the ObjectChecker as a byte[]. Fortunately it isn't common for
these object types to be that large,
Bug: 312868
Change-Id: I862afd4cb78013ee033d4ec68c067b1774a05be8
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
CC: Roberto Tyley <roberto.tyley@guardian.co.uk>
Some method parameters in WorkingTreeIterator are never used. Remove
them. Especially the removal of the FS parameter in isModified()
simplifies upcoming performance optimizations.
Change-Id: I7c449589283a4a6b6e23f2586cd784febdca8bcd
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Its confusing that a new TreeWalk() needs to have reset() invoked
on it before addTree(). This is a historical accident caused by
how TreeWalk was abused within ObjectWalk.
Drop the initial empty tree from the TreeWalk and thus remove a
number of pointless reset() operations from unit tests and some of
the internal JGit code.
Existing application code which is still calling reset() will simply
be incurring a few unnecessary field assignments, but they should
consider cleaning up their code in the future.
Change-Id: I434e94ffa43491019e7dff52ca420a4d2245f48b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
By inflating with an InputStream like API, it is possible to stream
through large objects rather than allocating the entire thing as
a byte[]. This change only refactors the inflation code within
IndexPack to use a streaming interface.
Change-Id: I5a84b486901c2cf63fa6a3306dd5fb5c53b4056b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Roberto Tyley <roberto.tyley@guardian.co.uk>
java.io.File.delete() reports failure as an exceptional
return value false. Fix the code which silently ignored
this exceptional return value. Also remove some duplicate
deletion helper methods.
Change-Id: I80ed20ca1f07a2bc6e779957a4ad0c713789c5be
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Provide file helper methods in a reusable utility class to
replace many local implementations. java.io.File has some
methods reporting failure by returning false. We prefer to
throw IOException on failure so that callers can't forget
checking the return value.
Change-Id: I430c77b5d2cffcf8b47584326ad4817a7291845e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Static accessors should come before a constructor.
Change-Id: Iee1051ce4f2038f19a08741e7a3a33f06a97a3c0
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
There are some files that need to exist so that the CLI can continue
after the rebase has been stopped due to conflicts
Change-Id: I3cb4dc98609c059bf0cf9fd5f9e47a9c681cea2d
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Currently the following can happen in LockFile.commit: deletion of the
original file succeeds but renaming fails afterwards. In this case the
original file (e.g. branch file in refs/heads) is lost.
To workaround the issue the same retry logic as for file deletion is
applied to file renaming.
Bug: 331890
Change-Id: I68620c07f2d3ab7f3279c71a91e184e8eac69832
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
Because tags are more interesting here than local or remote branch
heads, tags get sorted earlier in the array than heads or remotes do.
Bug: 324939
Change-Id: Ifc3863461654df7f34fdecbd2abe1f4b5d2ffb8e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Mathias Kinzler <mathias.kinzler@sap.com>
CC: Stefan Lay <stefan.lay@sap.com>
DirCacheCheckout needs to use ObjectLoader.copyTo to avoid loading the
complete content of a large file into the JVM heap.
Bug: 321097
Change-Id: I967590b6f233fd1c83d873075db01d653208b3b9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Chris Aniszczyk <caniszczyk@gmail.com>
CC: Christian Halstrick <christian.halstrick@sap.com>
If the environment variable GIT_SSH is set, use GIT_SSH for any remote
protocol connections, instead of the local JSch library.
Bug: 321062
Change-Id: Ia18ea49d58f3ed657430067f1f72ef788a2dae4c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In order to honor GIT_SSH the TransportGitSsh class needs to run the
process named by the GIT_SSH environment variable and use that as the
pipes for connectivity to the remote peer. Refactor the current
transport code to support a different type of pipe connectivity, so we
can later add GIT_SSH.
Bug: 321062
Change-Id: I9d8ee1a95f1bac5013b33a4a42dcf1f98f92172f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Displaying the current tree in the ls-tree style output makes it
easier to see what entries are currently stored.
Change-Id: If17c414db0d2e8d84e65de8bbcba7fd1b79aa311
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
This makes usage of a TreeFormatter more similar to a CommitBuilder or
a TagBuilder: populate the formatter and pass to the ObjectInserter.
Change-Id: I5a45ef3a35cc73f4905a34bc6f6228510df8eb2c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
This better matches the existing API of TreeFormatter, but is just a
simple delegation to build().
Change-Id: I188f43acc34455e773d63836724b05e18f5c7a84
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
These objects don't need to be updated with the resulting ObjectId of
the formatted content, callers can get that from the ObjectInserter on
their own.
Change-Id: Idc5f097de9f7beafc5e54e597383d82daf9d7db4
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
The correct names for these is build(), as that is what a Java
developer will expect given the "builder" pattern.
Bug: 323541
Change-Id: I35042bdc95a955beeaee29e54bde10e4240b2a71
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
When in OURS and THEIRS a new file is created we want a conflict
when the two contents differ. If on two branches the same file
with the same content is created this should not be a conflict.
But: the current merge algorithm is throwing NPEs in this case.
Fix this by choosing an empty RawText as common base if the
base is empty.
Change-Id: I21cb23f852965b82fb82ccd66ec961c7edb3ac3d
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
If the object type is a whole object and all we want is the type,
there is no need to skip the length header. The type is already known
and can be returned as-is. Instead skip the length header only for
the two delta formats, where the delta base must itself be scanned.
Change-Id: I87029258e88924b3e5850bdd6c9006a366191d10
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This variable was not used for anything, but Eclipse's JDT failed to
notice because of the "shift += " operation within the body of the
while loop. Here we don't need the shift because we do not decode the
length, but we do have to skip over the bytes that store the length to
locate the delta base.
Bug: 331319
Change-Id: I200a874fd7e39e3adf2640b8cd0f53dcf91ef4c9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Remy Suen <remysuen@ca.ibm.com>
If the CLI stops a rebase upon conflict, the current
step is already popped from the git-rebase-todo and appended to the
"done" file. The current implementation wrongly pops the step only
after successful cherry-pick.
Change-Id: I8640dda0cbb2a5271ecf75fcbad69410122eeab6
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Matthias Sohn
Shawn O. Pearce
Mathias Kinzler
roberto
Christian Halstrick
Chris Aniszczyk
Jens Baumgart