During a checkout we want to prevent to overwrite unsaved local file
content. Jgit was therefore checking whether the file to overwrite is
dirty or missing and would raise a conflict if this was the case. That
was wrong. It should only check if the file is dirty. It's ok to
"overwrite" a missing/non-existing file.
Change-Id: I63c3a94f663c87f09170fdf8b1b1bf4ed5246fc5
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
The change includes comparing symbolic links between disk and index,
adding symbolic links to the index, creating/modifying links on
checkout. The behavior is controlled by the core.symlinks setting, just
as C Git does. When a new repository is created core.symlinks will be
set depending on the capabilities of the operating system and Java
runtime.
If core.symlinks is set to true, the assumption is that symlinks are
supported, which may result in runtime errors if this turns out not to
be the case.
Measuring the cost of jgit status on a repository with ~70000 files,
of which ~30000 are tracked reveals a penalty of about 10% for using
the Java7 (really NIO2) support module.
Bug: 354367
Change-Id: I12f0fdd9d26212324a586896ef7eb1f6ff89c39c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This unnecessary import was introduced by 2ecc27d.
Change-Id: I5cb415de7e33428d9f95dfbe1e214ef24be9dad9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When encountering a submodule entry, "jgit archive" tries to write its
content verbatim as an entry to the archive, which fails with a
JGitInternalException wrapping a MissingObjectException because the
submodule repository commits are typically not part of the
superproject.
When a subproject is available (for example because it has been
checked out as a subdirectory of a superproject worktree), it would be
nice to recurse into it and make one archive recording the state of
the entire project. Unfortunately sometimes the subproject is not
available or it can be hard to find (e.g., it can be on another
server). Even when some subprojects are available, "jgit archive"
should not produce different output for the same tree depending on
which subprojects it has easy access to, so there is no obvious good
default behavior that recurses without relying on access to all
subprojects.
Instead, replace each submodule entry with a placeholder empty
directory. "git archive" does the same.
Change-Id: I1295086037b77fc948b3f93c21d47341e25483e5
Signed-off-by: Jonathan Nieder <jrn@google.com>
Entries for directories are optional and mostly wasted space in most
archive formats (except as a place to hang ownership and filesystem
permissions), but "git archive" includes them. Follow suit.
This will make it easier in a later change to include empty
directories as placeholders for missing submodules.
Change-Id: I1810c686bcc9eb4d73498e4d3e763e18787b088a
Signed-off-by: Jonathan Nieder <jrn@google.com>
Common practice when distributing tarballs is to prefix all entries
with a single directory name so when the tarball is extracted it all
falls neatly into a single directory. Add a setPrefix() method to
ArchiveCommand to support this.
Change-Id: I16b2832ef98c30977f6b77b646728b83d93c196f
Signed-off-by: Jonathan Nieder <jrn@google.com>
Add support for the machine-readable output format along with the
existing default long format.
Bug: 419968
Change-Id: I37fe5121b4c9dbae1106b1d18e9fdc134070a9dd
Signed-off-by: Kaloyan Raev <kaloyan.r@zend.com>
Add a test that checks out an existing branch with a dirty working tree
and involves a checkout conflict. This test should pass with a message:
"error: Your local changes to the following files would be overwritten
by checkout: a".
Change-Id: I5428a04a7630d9e0101404ea1aedd796f127bd7d
Signed-off-by: Axel Richard <axel.richard@obeo.fr>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If the --format option is not given and the output filename is,
then infer the format from that filename. Otherwise match
"git archive" by defaulting to tar (this is a change from the
existing "jgit archive" default behavior, which was to default to
zip).
Change-Id: I5806bc48a403d05e4cfc3c180b82b33ad7cfae7f
Attempts to write entries with too-long filenames currently error out:
$ jgit.pgm/target/jgit archive HEAD >test.tar
java.lang.RuntimeException: file name 'org.eclipse.jgit.http.server/src/org/eclipse/jgit/http/server/resolver/DefaultReceivePackFactory.java' is too long ( > 100 bytes)
at org.apache.commons.compress.archivers.tar.TarArchiveOutputStream.putArchiveEntry(TarArchiveOutputStream.java:288)
at org.eclipse.jgit.archive.TarFormat.putEntry(TarFormat.java:92)
at org.eclipse.jgit.archive.TarFormat.putEntry(TarFormat.java:62)
at org.eclipse.jgit.api.ArchiveCommand.writeArchive(ArchiveCommand.java:293)
at org.eclipse.jgit.api.ArchiveCommand.call(ArchiveCommand.java:322)
at org.eclipse.jgit.pgm.Archive.run(Archive.java:97)
at org.eclipse.jgit.pgm.TextBuiltin.execute(TextBuiltin.java:174)
at org.eclipse.jgit.pgm.Main.execute(Main.java:213)
at org.eclipse.jgit.pgm.Main.run(Main.java:121)
at org.eclipse.jgit.pgm.Main.main(Main.java:95)
That's because the default longFileMode is LONGFILE_ERROR, which
throws an exception for filenames longer than 100 characters. Switch
to LONGFILE_POSIX. While at it, handle large files and filenames with
strange encodings, too.
This requires commons compress 1.4, which introduced support for large
files and POSIX long filenames.
Change-Id: I04d5427eec0968b129f55d7a4c6021039a494828
Use recursive merge as the default strategy since it can successfully
merge more cases than the resolve strategy can. This is also the default
in native Git.
Change-Id: I38fd522edb2791f15d83e99038185edb09fed8e1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Added also tests and the associated option for the command line Merge
command.
Bug: 335091
Change-Id: Ie321c572284a6f64765a81674089fc408a10d059
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Writing CLI test cases is tedious because of all the formatting and
escaping subtleties needed when comparing actual output with what's
expected. While creating a test case the two new functions are to be
used instead of the existing execute() in order to prepare the correct
command and expected output and to generate the corresponding test code
that can be pasted into the test case function.
Change-Id: Ia66dc449d3f6fb861c300fef8b56fba83a56c94c
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
Unlike ZIP files, tar files do not treat symlinks as ordinary files
with a different mode, so tar support involves a little more code than
would be ideal.
Change-Id: Ica2568f4a0e443bf4b955ef0c029bc8eec62d369
Setting the mode for a zip entry is now as simple as
"entry.setUnixMode(mode)", so do that.
The test checks using the system's "zipinfo" command (from InfoZIP)
that the mode has been recorded correctly on systems that happen to
have a "zipinfo" command, using org.junit.Assume to distinguish them.
Change-Id: I4236c102fd76f18d01b2dc926eeb9b9fa11a61b7
C Git's "git archive" command represents a tree object using a
standard archival format like tar, zip, or tgz, ready for consumption
by other, git-unaware users or tools.
Add a bare-bones analagous "jgit archive" command to show what is
possible, supporting only ZIP format for now. It uses java.util.zip
which is not aware of the InfoZIP extensions for representing symlinks
and file permissions, so symlinks, executable files, and submodule
entries are represented as plain text files.
Making this functionality available from the library, improving
handling of special entries, and support for other output formats are
left for later patches. Ultimately the intent is to offer a
TreeArchiveStream class for use by web frontends like Gitiles to offer
"download as zip/tgz/txz" links and use by, for example, code search
tools to get easy access to the content of git tree objects.
Test with "jgit archive my-favorite-tree >out.zip".
Change-Id: Ib590f173ceff3df4b58493cecccd6b9a1b355e3d
The test checks if an error is thrown when trying to create the same tag
for the second time.
Change-Id: I4ed2f6c997587f0ea23bd26a32fb64a2d48a980e
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
This is a first basic implementation that displays current branch and
list of files of various status, but isn't as refined as its native
counterpart (e.g. does not say if we're ahead or behind the remote).
It's been helpful in the diagnostic of bug #347885.
Bug: 348318
CQ: 6769
Change-Id: Ifc35da608fbba652524c1b5b522e3c0d5369ad5e
Signed-off-by: François Rey <eclipse.org@francois.rey.name>
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Java has no option but to use precomposed Unicode, so we should
state that when creating a new repository. Not that Java will use
precomposed unicode regardless of this setting, but this reduces
the risk of incompatibility with C Git.
Change-Id: I3779b75f76d2e2061c836cbc9b4b7c2ae0cf18f4
core.autorlf defaults to false, but can be set in the user or
"system" config files. Note that EGit/JGit may not know
where the "system" config file is located.
Also fix pgm's ConfigTest which depends on default repository
configuration.
Bug: 382067
Change-Id: I2c698a76e30d968e7f351b4f5a2195f0b124f62f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Currently, only --list option is supported with --global, --system,
--local and --file switches.
Change-Id: I9b179b162996520e95c4e001dccd65c566a4bd27
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This reverts commit bf845c126d since this
change needs to go through a formal IP review and Chris missed to file a
CQ for that.
Change-Id: I303515d78116f0591a2911dbfb9f857738f086a9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Robin Stocker
Christian Halstrick
Robin Rosenberg
Matthias Sohn
Jonathan Nieder
Kaloyan Raev
Axel Richard
Tomasz Zarna
François Rey
Tomasz Zarna
Tomasz Zarna