This ensure DfsReftableDatabase is tested by the same test suites that
use/test InMemoryRepository. It also simplifies the logic of
InMemoryRepository and brings its compatibility story closer to any
other DFS repository that uses reftables for its reference storage.
Change-Id: I881469fd77ed11a9239b477633510b8c482a19ca
Signed-off-by: Minh Thai <mthai@google.com>
Signed-off-by: Terry Parker <tparker@google.com>
DfsReftableDatabase is a new alternative for DfsRefDatabase that
handles more operations for the implementor by delegating through
reftables. All reftable files are stored in sibling DfsObjDatabase
using PackExt.REFTABLE and PackSource.INSERT.
Its assumed the DfsObjDatabase periodically runs compactions and GCs
using DfsPackCompactor and DfsGarbageCollector. Those passes are
essential to collapsing the stack of reftables.
Change-Id: Ia03196ff6fd9ae2d0623c3747cfa84357c6d0c79
Signed-off-by: Minh Thai <mthai@google.com>
Signed-off-by: Terry Parker <tparker@google.com>
Do tilde replacement for values from the ssh config file that are
file names in all cases to make sure that they are already replaced
when Jsch tries to get the values.
Previously, OpenSshConfig did tilde replacement only for the
IdentityFile in the JGit-facing "Host" interface and left the
replacement in the Jsch-facing "Config" interface to Jsch.
But on Windows the JGit notion of what should be used to replace the
tilde differs from Jsch's replacement. Jsch always replaces the tilde
by the value of the system property "user.home", whereas JGit also
considers some environment variables like %HOME%. This can lead to
rather surprising failures as in the case of bug 526175 where
%HOME% != user.home.
Prior to commit 9d24470 (i.e.,prior to JGit 4.9.0) this problem never
occurred because Jsch was completely unaware of the ssh config file
and all host and IdentityFile handling happened exclusively in JGit.
Bug: 526175
Change-Id: I1511699664ffea07cb58ed751cfdb79b15e3a99e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Allow creating symbolic references with link, and deleting them or
switching to ObjectId with unlink. How this happens is up to the
individual RefDatabase.
The default implementation detaches RefUpdate if a symbolic reference
is involved, supporting these command instances on RefDirectory.
Unfortunately the packed-refs file does not support storing symrefs,
so atomic transactions involving more than one symref command are
failed early.
Updating InMemoryRepository is deferred until reftable lands, as I
plan to switch InMemoryRepository to use reftable for its internal
storage representation.
Change-Id: Ibcae068b17a2fc6d958f767f402a570ad88d9151
Signed-off-by: Minh Thai <mthai@google.com>
Signed-off-by: Terry Parker <tparker@google.com>
Round first, then calculate the labels. This avoids "x years, 12 months"
and instead produces "x+1 years".
One test case has been added for the original example the bug was found
with, and one assertion has been moved from an existing test case to the
new test case, since it also triggered the bug.
Bug: 525907
Change-Id: I3270af3850c4fb7bae9123a0a6582f93055c9780
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Shadow commits in the RevWalk in the UploadPack object may cause the
UNINTERESTING flag not being carried over to their parents commits since
they were marked NO_PARENTS during the assumeShallow or
initializeShallowCommits call.
A new RevWalk needs to be created for this reason, but instead of
creating a new RevWalk from Repository, we can reuse the ObjectReader in
the RevWalk of UploadPack to load objects.
Change-Id: Ic3fee0512d35b4f555c60e696a880f8b192e4439
Signed-off-by: Zhen Chen <czhen@google.com>
Checkout sometimes throws an exception, and
other times it writes an error message to outw
and returns normally, even though the command
failed. This commit now reports all failures
through a die() exception.
Change-Id: I038a5d976d95020fea3faac68e9178f923c25b28
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
Per git-config(1), core.logAllRefUpdates auto-creates reflogs for HEAD
and for refs under heads, notes, tags, and for HEAD. Add notes and
remove stash from ReflogWriter#shouldAutoCreateLog. Explicitly force
writing reflogs for refs/stash at call sites, now that this is
supported.
Change-Id: I3a46d2c2703b7c243e0ee2bbf6948279800c485c
Even if a repository has core.logAllRefUpdates=true, ReflogWriter does
not create reflog files unless the refs are under a hard-coded list of
prefixes, or unless the forceWrite bit is set. Expose the forceWrite bit
on a per-update basis in RefUpdate/BatchRefUpdate/ReceiveCommand,
creating RefLogWriters as necessary.
Change-Id: Ifc851fba00f76bf56d4134f821d0576b37810f80
The ReflogWriter constructor just took a Repository and called
getDirectory() on it to figure out the reflog dirs, but not all
Repository instances use this storage format for reflogs, so it's
incorrect to attempt to use ReflogWriter when there is not a
RefDirectory directly involved. In practice, ReflogWriter was mostly
only used by the implementation of RefDirectory, so enforcing this is
mostly just shuffling around calls in the same internal package.
The one exception is StashDropCommand, which writes to a reflog lock
file directly. This was a reasonable implementation decision, because
there is no general reflog interface in JGit beyond using
(Batch)RefUpdate to write new entries to the reflog. So to implement
"git stash drop <N>", which removes an arbitrary element from the
reflog, it's fair to fall back to the RefDirectory implementation.
Creating and using a more general interface is well beyond the scope of
this change.
That said, the old behavior of writing out the reflog file even if
that's not the reflog format used by the given Repository is clearly
wrong. Fail fast in this case instead.
Change-Id: I9bd4b047bc3e28a5607fd346ec2400dde9151730
This test was never being run. Since it was introduced it was
named "notest.." which meant it didn't run with JUnit3, and
since it is not annotated @Test it also doesn't run with JUnit4.
When compiling with Bazel 0.6.0, error-prone raises an error
that the public method is not annotated with @Ignore or @Test.
Given that the test has never been run anyway, we can just
remove it.
Bug: 525415
Change-Id: Ie9a54f89fe42e0c201f547ff54ff1d419ce37864
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This allows the tests to all be built and run by bazel.
Bug: 525412
Change-Id: Ie9281d07462cd07200fadb4b0e7b7f88c44f7865
Signed-off-by: Pepper Lebeck-Jobe <eljobe@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Same problem as in commit c227268: openUserConfig() just creates the
FileBasedConfig object, but doesn't read the file yet. An explicit
load() is needed.
As HttpConfig is read-only this omission did not cause any bad effects,
but it simply ignored values from the user config. Most uses of
HttpConfig go through the two-argument constructor, though, where
HttpConfig is given an already loaded repo config.
Change-Id: Ibe7c562c17d6ef37de8b661ab7f6fa0246db01a2
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
SystemReader.openUserConfig() does not load the config yet; an
explicit StoredConfig.load() is needed.
Bug: 374703
Change-Id: I1c397e2fb1a07ac4d9de3675d996417734ff90e9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Added a public method to TextBuiltin which makes it possible for
clients to initialize all of its state, including output and error
streams. This gives clients the ability to customize the way in
which a command is run.
Change-Id: If718236964d2c5cf869e120c74f1a12965f4812e
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
When the submodule already exists, it is fetched instead of
cloned.
Use the fetch callback instead of clone callback in this case.
Change-Id: I170c21ab92b4117f25fdf940fe6807f214b04d39
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
By default, this is turned off unless cmd.setFetch(true) is given. It
will default to true in a future release to mimic c-git behaviour.
This is needed to prevent Eclipse from crashing with "Missing unknown
[REF]" when cloning a repo with submodules.
Bug: 470318
Change-Id: I8ae37c7c5bd2408cead8d57dd13e93e01e0e9dc1
Signed-off-by: Michael FIG <michael@fig.org>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
When a https connection could not be established because the SSL
handshake was unsuccessful, TransportHttp would unconditionally
throw a TransportException.
Other https clients like web browsers or also some SVN clients
handle this more gracefully. If there's a problem with the server
certificate, they inform the user and give him a possibility to
connect to the server all the same.
In git, this would correspond to dynamically setting http.sslVerify
to false for the server.
Implement this using the CredentialsProvider to inform and ask the
user. We offer three choices:
1. skip SSL verification for the current git operation, or
2. skip SSL verification for the server always from now on for
requests originating from the current repository, or
3. always skip SSL verification for the server from now on.
For (1), we just suppress SSL verification for the current instance of
TransportHttp.
For (2), we store a http.<uri>.sslVerify = false setting for the
original URI in the repo config.
For (3), we store the http.<uri>.sslVerify setting in the git user
config.
Adapt the SmartClientSmartServerSslTest such that it uses this
mechanism instead of setting http.sslVerify up front.
Improve SimpleHttpServer to enable setting it up also with HTTPS
support in anticipation of an EGit SWTbot UI test verifying that
cloning via HTTPS from a server that has a certificate that doesn't
validate pops up the correct dialog, and that cloning subsequently
proceeds successfully if the user decides to skip SSL verification.
Bug: 374703
Change-Id: Ie1abada9a3d389ad4d8d52c2d5265d2764e3fb0e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Git has a rather elaborate mechanism to specify HTTP configuration
options per URL, based on pattern matching the URL against "http"
subsection names.[1] The URLs used for this matching are always the
original URLs; redirected URLs do not participate.
* Scheme and host must match exactly case-insensitively.
* An optional user name must match exactly.
* Ports must match exactly after default ports have been filled in.
* The path of a subsection, if any, must match a segment prefix of
the path of the URL.
* Matches with user name take precedence over equal-length path
matches without, but longer path matches are preferred over
shorter matches with user name.
Implement this for JGit. Factor out the HttpConfig from TransportHttp
and implement the matching and override mechanism.
The set of supported settings is still the same; JGit currently
supports only followRedirects, postBuffer, and sslVerify, plus the
JGit-specific maxRedirects key.
Add tests for path normalization and prefix matching only on segment
separators, and use the new mechanism in SmartClientSmartServerSslTest
to disable sslVerify selectively for only the test server URLs.
Compare also bug 374703 and bug 465492. With this commit it would be
possible to set sslVerify to false for only the git server using a
self-signed certificate instead of having to switch it off globally
via http.sslVerify.
[1] https://git-scm.com/docs/git-config
Change-Id: I42a3c2399cb937cd7884116a2a32fcaa7a418fcb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This will be used later when adding for support for recursing
submodules on push.
Change-Id: Ie2a183e5404a32046de9f6524e6ceeec37919671
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
With atomic ref updates using packed refs, JGit did not fire a
RefsChangedEvent. This resulted in a user-visible regression in
EGit: the UI would not update after a "Fetch from upstream...".
Presumably it would also make Gerrit miss out on ref changes?
Strengthen the BatchRefUpdateTest by also asserting the expected
number of RefsChangedEvents, and ensure modCnt is incremented in
RefDirectory.commitPackedRefs() when refs really changed (as opposed
to some internal housekeeping operation, such as packing loose refs).
Bug: 521296
Change-Id: Ia985bda1d99f45a5f89c8020ca4845e7a66e743e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Much of the time the caller can specify a RefSpec succinctly using a
string, and doesn't care about calling setters. Add a convenience method
for this case, and use it where applicable in JGit core.
Change-Id: Ic3fac7fc568eee4759236a5264d2e7e5f9b9716d
An application can choose to invoke setAdvertisedRefs multiple times,
for example several AdvertiseRefsHook installed in a chain. Each of
these invocations populates the advertisedHaves collection with the
unique set of ObjectIds.
This can lead to a server over-advertising with ".have" lines if the
first hook pushes in a lot of references, and the second hook filters
this to a subset. ReceivePack will advertise the unique objects from
the first hook using ".have" lines, which may lead to a huge
advertisement sent to the client.
This can also contribute to a very slow connectivity check after the
pack is parsed as ReceivePack calls markUninteresting on every commit
in advertisedHaves. This may require expanding a lot of subtrees to
mark all trees as uninteresting as well. On a very big repository
this can lead to a many-second stall.
Clear the advertisedHaves collection any time the refs are updated.
Add a test to verify the correct set of objects was sent.
Change-Id: I97f6998d0597251444a2e846a3ea1f461bae96f9
When a repository is initially created using only reftable but doesn't
yet have a GC pack, the garbage collector shouldn't scan the ref
database. Support disabling the reftable conversion path.
Change-Id: Iaaf3a4375cd43760b7181c1bd10244de8b2c5d9e
DfsGarbageCollector always performs refreshes. This warning was from
a prior iteration of the patch set and should have been removed before
the change was merged.
Change-Id: Id4750bb6c1c177e1ef040fd22912f434bbb5e992
Instead of taking a String, the constructors now take a Localizable
and a variable list of format arguments.
Introduce a new Format helper class in CLIText, which implements the
Localizable interface, and use it in place of raw Strings.
Change-Id: I241eda16e242293ceb17b3c85ae5df85bd37c658
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Change-Id: Ida7b9ddc991515ab233763f2cb985853c9143a3c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The tests:
- testCheckBlobNotCorrupt
- testCheckBlobCorrupt
create instances of ObjectChecker that are the same.
The tests:
- testCheckBlobWithBlobObjectCheckerNotCorrupt
- testCheckBlobWithBlobObjectCheckerCorrupt
also create instances of ObjectChecker that are the same.
Factor these instances out to constants instead of creating them
in the tests.
The `checker` member is still created anew in each test, since some
of the tests change its state.
Change-Id: I2d90263829d01d208632185b1ec2f678ae1a3f4c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Add tests for "true" and "false" matching to "YES" and "NO".
Change-Id: I58223855022871ac4b21bd34ff6a9cd00fce30a1
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Just return configValue instead of transforming name().
Change-Id: I7f94ab2e206e93d1370467e187c5e68e8f6a8836
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If a ReftableConfig has been supplied by the caller, write out a
reftable as a sibling of the the GC pack, alongside the heads.
To bootstrap from a non-reftable system, the refs are read from the
DfsRefDatabase if no GC reftables are present. Its assumed the
references are fully current, and do not need to be merged with any
other reftables. Any non-GC reftables will be pruned at the end of
the GC cycle, just like any packs that were replaced.
If a GC reftable is present, all existing reftables are compacted, and
references from DfsRefDatabase are only used to seed the packer. Its
assumed these are consistent with each other.
Change-Id: Ie397eb58aaaefb6865c816d9b39de3ac12998019
Remove final field modifier since args4j does no longer allow use of
final fields [1].
[1] 6e11f89d40
Change-Id: Ib3dee10828d87d6b558c2e90387eadd9aa2ce260
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
ServerSocket.accept() is not interruptible: a thread busy in accept()
may not react to Thread.interrupt() and may not return from accept()
via an InterruptedException. Close the socket instead to make the
daemon's listener thread terminate.
* Close the listening socket to get the listening thread to exit
instead of interrupting it.
* Add a stopAndWait() method that stops the listening thread and
then waits until it has indeed finished.
* Set SO_REUSE_ADDRESS on the listening socket.
Bug: 376369
Change-Id: I9d6014103e6dcb0173daea134feb44dc52c5c69a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Sun's Java 5, 6, 7 implementation had a bug [1] where a Reference can be
enqueued and dequeued twice on the same reference queue due to a race
condition within ReferenceQueue.enqueue(Reference).
This bug was fixed for Java 8 [2] hence remove the workaround.
[1] http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6837858
[2] http://hg.openjdk.java.net/jdk8/jdk8/jdk/rev/858c75eb83b5
Change-Id: I2deeb607e3d237f9f825a207533acdee305c7e73
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Shawn Pearce
Terry Parker
Thomas Wolf
Michael Keppler
David Pursehouse
Zhen Chen
Matthias Sohn
Till Brychcy
Ned Twigg
Dmitry Neverov
Dave Borowitz
Pepper Lebeck-Jobe
Michael FIG