When writing new packs it should be allowed to specify objects as "have"
(objects which should not be included in the pack) which do not exist in
the local repository.
This works with the traditional PackWriter, but when PackWriter was
working on a repository with bitmap indexes and used
PackWriterBitmapWalker then this feature was broken. Non-existing "have"
objects lead to MissingObjectExceptions. That broke push and Gerrit
replication. When the replication target had branches unknown to the
replication source then the source repository wanted to build pack files
where "have" included branch-tips which were unknown in the source
repository.
Bug: 427107
Change-Id: I6b6598a1ec49af68aa77ea6f1f06e827982ea4ac
Also-by: Matthias Sohn <matthias.sohn@sap.com>
JGit should offer the possibility to do a garbage collection in
"aggressive" mode. In this mode garbage collection more aggressively
optimize the repository at the expense of taking much more time.
Technically a aggressive mode garbage collection differs from a
non-aggressive one by:
- not reusing packed objects found in old packs. Recompress every object
- the configuration pack.window is set to 250 (the default is 10)
- the configuration pack.depths is set to 250 (the default is 50)
The associated classes in org.eclipse.jgit.api and the command line
command in org.eclipse.jgit.pgm expose this new option.
The configuration parameters gc.aggressiveDepth and gc.aggressiveWindow
have been introduced to configure this feature.
Bug: 444332
Change-Id: I024101f2810acf6be13ce144c9893d98f5c4ae76
Set the commit message to be used for the merge commit (in case one is
created)
Bug: 442886
Change-Id: Ie5ecc13822faa366f00b3daa07f74c8441cae195
Signed-off-by: Axel Richard <axel.richard@obeo.fr>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
uninteresting
Using the ObjectWalk and marking a commit as uninteresting didn't mark
its root tree as uninteresting. This caused the "missing tree ..."
error in Gerrit under special circumstances. For example, if the
patch-set 2 changes only the commit message then the patch-set 1
and patch-set 2 share the same root-tree:
ps1 -> o o <- ps2
\ /
o root-tree
The transported pack will contain the ps2 commit but not the root-tree
object.
When using the BaseReceivePack.setCheckReferencedObjectsAreReachable
JGit will check the reachability of all referenced objects not provided
in the transported pack. Since the ps1 was advertised it will properly
be marked as uninteresting. However, the root-tree was reachable because
the ObjectWalk.markUninteresting missed to mark it as uninteresting.
JGit was then rejecting the pack with the "missing tree ..." exception.
Gerrit-issue: https://code.google.com/p/gerrit/issues/detail?id=1582
Change-Id: Iff2de8810f14ca304e6655fc8debeb8f3e20712b
Signed-off-by: Saša Živkov <sasa.zivkov@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This matches what C Git does, see "stripped" in `man git-commit-tree`.
It also fixes the bug of the user where an user.email like "<>" would
show up as "<<>>" in EGit.
Bug: 439844
Change-Id: I567a3c620e191ce9d37d318417e63cb5d4483419
Signed-off-by: Robin Stocker <robin@nibor.org>
This reverts commit b646578d89.
openInputStream() is never used in JGit, nor is it used by any
known working DFS implementation. The method was added as a
utility for reading back from a DfsInserter, but the final
implementation of that feature does not requrire this method.
Change-Id: I075ad95e40af49c92b554480f8993ef5658f7684
In the DFS implementation, flushing an inserter writes a new pack to
the storage system and is potentially very slow, but was the only way
to ensure previously-inserted objects were available. For some tasks,
like performing a series of three-way merges, the total size of all
inserted objects may be small enough to avoid flushing the in-memory
buffered data.
DfsOutputStream already provides a read method to read back from the
not-yet-flushed data, so use this to provide an ObjectReader in the
DFS case.
In the file-backed case, objects are written out loosely on the fly,
so the implementation can just return the existing WindowCursor.
Change-Id: I454fdfb88f4d215e31b7da2b2a069853b197b3dd
Instead of passing on the start point as is to CreateBranchCommand, the
resolved ObjectId was used. Given this, CreateBranchCommand did not set
up tracking.
This also fixes CreateBranchCommand with setStartPoint(null) to use HEAD
(instead of NPEing), as documented in the Javadoc.
Bug: 441153
Change-Id: I5ed82b4a4b4a32a81a7fa2854636b921bcb3d471
Signed-off-by: Robin Stocker <robin@nibor.org>
JGit handled this case improperly which these tests demonstrate. Fixed
by I25915880f304090fe90584c79bddf021231227a2.
Bug: 440537
Change-Id: Ia29c1d6cf8c0ce724cc3ff5ed9e0b396949b44bf
Signed-off-by: Laurent Goubet <laurent.goubet@obeo.fr>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If the IndexDiffFilter is asked whether it should include or filter out
a certain path and for that path there is a dircache entry with a stage
different from 0, then the filter should never filter out this entry.
IndexDiffFilter is an optimized version of AnyDiffFilter and there is no
case where the index contains non-0 stages but we still don't see any
diff for that path.
Change-Id: I25915880f304090fe90584c79bddf021231227a2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The fix is to move the new head commit to the newly-created revert
commit, so that additional revert commits will use the correct head.
Change-Id: I5de3a9a2a4c276e60af732e9c507cbbdfd1a4652
Signed-off-by: Maik Schreiber <blizzy@blizzy.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Apparently repo allows projects overlapping, e.g. one project's path is "foo"
and another project's path is "foo/bar". This is not supported in git submodule.
At JGit repo side we'll skip all the submodules that are in subdirectories of
other submodules, and on repo side we'll make them submodules to resolve this
problem.
Change-Id: I6820c4ef400c530a36150b1228706adfcc43ef64
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Previously when RecursiveMerger was trying to create a single virtual
common base for the merge it was failing when this lead to content-merge
conflicts. This is different from what native git is doing. When native
git's recursive merge algorithm creates a new common base it will merge
the multiple parents and simply take the merge result (potentially
including conflict markers) as common base. See my discussion with Shawn
here: http://www.spinics.net/lists/git/msg234959.html :
> - How should workingtree, index (stage1,2,3) look like if during
that
> merge of common ancestors a conflict occurs? Will I see in stage2
and
> stage3 really see content of X1 and X2?
Its done entirely in memory and never touches the working tree or
index. When a conflict exists in the X1-X2 merge the conflict is
preserved into the new virtual base.
There is still the possibility that the merge of parents lead to
conflicts. File/Folder conclicts, conflicts on filemodes. This commit
only fixes the situation for conflicts when merging content.
Bug: 438203
Change-Id: If45bc3d078b3d3de87b758e71d7379059d709603
When RecursiveMerger tried to determine a common base tree it was
recursively tried to merge multiple common bases. But these intermediate
merges which have just been done to determine a single common base for
the final merge already filled some important fields (toBeCheckedOut,
toBeDeleted, ...). These side effects of the intermediate merges led to
wrong results of the final merge. One symptom was that after a recursive
merge which should be succesful you could still see leftover files in
the worktree: files which existed in the (virtual) common base but which
don't exist anymore in the branches to be merged.
The solution is easy: Clear the appropriate fields after common base
determination and start the final merge with a clean state.
Change-Id: I644ea9e1cb15360f7901bc0483cdb9286308c226
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
As described in native gits file "git-read-tree.txt" git has in a
special mode when doing the "initial" checkout. "Initial" means that the
index is empty before the checkout. This was not handled correctly in
JGit and is fixed in this commit. Also see
https://github.com/git/git/blob/master/Documentation/git-read-tree.txt#L181
Change-Id: I9b9d1bd9ebf349cfca420c891c7b099a18d07ba4
Setting branch.<name>.rebase or pull.rebase to 'preserve' will preserve
merges during rebase. Also, pull.rebase is now consulted if there is no
branch-specific configuration.
Bug: 429664
Change-Id: I345fa295c7e774e0d0a8e6aba30fbfc3552e0084
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
With --preserve-merges C Git re-does merges using the rewritten merge
parents, discarding the old merge commit. For the common use-case of
pull with rebase this is unfortunate, as it loses the merge conflict
resolution (and other fixes in the merge), which may have taken quite
some time to get right in the first place.
To overcome this we use a two-fold approach:
If any of the (non-first) merge parents of a merge were rewritten, we
also redo the merge, to include the (potential) new changes in those
commits.
If only the first parent was rewritten, i.e. we are merging a branch
that is otherwise unaffected by the rebase, we instead cherry-pick the
merge commit at hand. This is done with the --mainline 1 and --no-commit
options to apply the changes introduced by the merge. Then we set up an
appropriate MERGE_HEAD and commit the result, thus effectively forging a
merge.
Apart from the approach taken to rebase merge commits, this
implementation closely follows C Git. As a result, both Git
implementations can continue rebases of each other.
Preserving merges works for both interactive and non-interactive rebase,
but as in C Git it is easy do get undesired outcomes with interactive
rebase.
CommitCommand supports committing merges during rebase now.
Bug: 439421
Change-Id: I4cf69b9d4ec6109d130ab8e3f42fcbdac25a13b2
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
DiffFormatter now suports either side being null and the log program
will output the diff for the first commit.
Bug: 395791
Change-Id: I378957b57e9ad1f7195ba416f402178453f0ebd3
Making the methods static would gain little in performance,
make the code harder to change. Removing unncessary warnings
is more important.
Change-Id: If3e6aa9c1d92e58b4e7a8e246cf4aace237d7a7b
These settings were added by Eclipse simply by touching
the project settings. Adding these makes it simpler to see
what local changes have been made.
Change-Id: Iab0aa62530312eb0c78b03b5c6a632742bcc4978
Connecting to an SshSession may fail due to different reasons. Jsch for
example often throws an com.jcraft.jsch.JschException: verify: false.[1]
The issue is still not fixed in JSch 0.1.51.
In such a case it is worth retrying to connect. The number of connection
attempts can be configured using ssh_config parameter
"ConnectionAttempts" [2].
Don't retry if the user canceled authentication.
[1] http://sourceforge.net/p/jsch/bugs/58/
[2] http://linux.die.net/man/5/ssh_config
Bug: 437656
Change-Id: I6dd2a3786b7d3f15f5a46821d8edac987a57e381
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The current behavior of passing a TreeFilter to RevWalk has limited
usefulness, since the RevFilter derived from the TreeFilter is always
ANDed together with any other RevFilters. It is also tied fairly
tightly to the parent rewriting mechanism.
Make TreeRevFilter a generic RevFilter that matches modified paths
against any TreeFilter. This allows for more complex logic like
(modified this path OR authored by this person).
Leave the rewrite flag logic in this class, since it's closely tied to
the parent comparison code, but hidden behind a protected constructor.
Change-Id: Ia72ef591a99415e6f340c5f64583a49c91f1b82f
When update the manifest against a bare repository, RepoCommand will replace
every existing content from the repository with contents populated from the
manifest. Added note for that and a unit test to make sure this behavior.
Change-Id: I1d5960e84bca5aa2a4e86f424d2ddd4197894cdc
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
PackFileTest lives in o.e.j.internal.storage.file, so I think it's OK for
it to acknowledge the existence of FileRepository in order to avoid some
unnecessary casting, and probably nicer to avoid the repetition too.
Change-Id: I0de592a32f6178e6d6bf114848101e185b3111a1
Signed-off-by: Roberto Tyley <roberto.tyley@gmail.com>
Unstashed changes are saved in a commit which is added as an additional
parent to the stash commit.
This behaviour is fully compatible with C Git stashing of untracked
files.
Bug: 434411
Change-Id: I2af784deb0c2320bb57bc4fd472a8daad8674e7d
Signed-off-by: Andreas Hermann <a.v.hermann@gmail.com>
If a client passes a multiline message as argument to ReflogWriter.log()
the Reflog gets corrupted and cannot be parsed. ReflogWriter.log() is
invoked implicitly from various commands such as StashCreate, Rebase and
many more. However the message is not always filtered for line feeds.
Such an example is the StashCreateOperation of EGit which passes
unchecked user input as commit message. If a multiline comment is pasted
to the stash create dialog, the reflog gets corrupted.
ReflogWriter now replaces line endings in log message with spaces.
Bug: 435509
Change-Id: I3010cc902e13bee4d7b6696dfd11ab51062739d3
Signed-off-by: Andreas Hermann <a.v.hermann@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn
Christian Halstrick
Konrad Kügler
Axel Richard
Saša Živkov
Robin Stocker
Yuxuan 'fishy' Wang
Shawn Pearce
Dave Borowitz
Alexey Kuznetsov
Laurent Goubet
Maik Schreiber
Robin Rosenberg
Stefan Lay
Roberto Tyley
Andreas Hermann