Browse Source

[doc] Correct install_env.sh file name (#13294)

duplicate #12209
3.2.0-release
Jay Chung 2 years ago committed by GitHub
parent
commit
aec26f06db
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
  1. 6
      docs/docs/en/guide/expansion-reduction.md
  2. 4
      docs/docs/en/guide/upgrade/upgrade.md
  3. 6
      docs/docs/zh/guide/expansion-reduction.md
  4. 4
      docs/docs/zh/guide/upgrade/upgrade.md

6
docs/docs/en/guide/expansion-reduction.md

@ -6,7 +6,7 @@ This article describes how to add a new master service or worker service to an e
``` ```
Attention: There cannot be more than one master service process or worker service process on a physical machine. Attention: There cannot be more than one master service process or worker service process on a physical machine.
If the physical machine which locate the expansion master or worker node has already installed the scheduled service, check the [1.4 Modify configuration] and edit the configuration file `conf/config/install_config.conf` on ** all ** nodes, add masters or workers parameter, and restart the scheduling cluster. If the physical machine which locate the expansion master or worker node has already installed the scheduled service, check the [1.4 Modify configuration] and edit the configuration file `bin/env/install_env.sh` on ** all ** nodes, add masters or workers parameter, and restart the scheduling cluster.
``` ```
### Basic software installation ### Basic software installation
@ -96,7 +96,7 @@ Attention:
```shell ```shell
sudo ln -s /opt/soft/java/bin/java /usr/bin/java sudo ln -s /opt/soft/java/bin/java /usr/bin/java
``` ```
- Modify the configuration file `conf/config/install_config.conf` on the **all** nodes, synchronizing the following configuration. - Modify the configuration file `bin/env/install_env.sh` on the **all** nodes, synchronizing the following configuration.
* To add a new master node, you need to modify the IPs and masters parameters. * To add a new master node, you need to modify the IPs and masters parameters.
* To add a new worker node, modify the IPs and workers parameters. * To add a new worker node, modify the IPs and workers parameters.
@ -222,7 +222,7 @@ If the corresponding master service or worker service does not exist, then the m
### Modify the Configuration File ### Modify the Configuration File
- modify the configuration file `conf/config/install_config.conf` on the **all** nodes, synchronizing the following configuration. - modify the configuration file `bin/env/install_env.sh` on the **all** nodes, synchronizing the following configuration.
* to scale down the master node, modify the IPs and masters parameters. * to scale down the master node, modify the IPs and masters parameters.
* to scale down worker nodes, modify the IPs and workers parameters. * to scale down worker nodes, modify the IPs and workers parameters.

4
docs/docs/en/guide/upgrade/upgrade.md

@ -40,7 +40,7 @@ Execute database upgrade script: `sh ./tools/bin/upgrade-schema.sh`
### Upgrade Service ### Upgrade Service
#### Change Configuration `bin/env/install_config.conf` #### Change Configuration `bin/env/install_env.sh`
- If you deploy with Pseudo-Cluster deployment, change it according to [Pseudo-Cluster](../installation/pseudo-cluster.md) section "Modify Configuration". - If you deploy with Pseudo-Cluster deployment, change it according to [Pseudo-Cluster](../installation/pseudo-cluster.md) section "Modify Configuration".
- If you deploy with Cluster deployment, change it according to [Cluster](../installation/cluster.md) section "Modify Configuration". - If you deploy with Cluster deployment, change it according to [Cluster](../installation/cluster.md) section "Modify Configuration".
@ -65,7 +65,7 @@ The architecture of worker group is different between version before version 1.3
| 1 | service1 | 192.168.xx.10 | | 1 | service1 | 192.168.xx.10 |
| 2 | service2 | 192.168.xx.11,192.168.xx.12 | | 2 | service2 | 192.168.xx.11,192.168.xx.12 |
- Modify worker related configuration in `bin/env/install_config.conf`. - Modify worker related configuration in `bin/env/install_env.sh`.
Assume below are the machine worker service to be deployed: Assume below are the machine worker service to be deployed:

6
docs/docs/zh/guide/expansion-reduction.md

@ -6,7 +6,7 @@
``` ```
注意: 一台物理机上不能存在多个master服务进程或者worker服务进程. 注意: 一台物理机上不能存在多个master服务进程或者worker服务进程.
如果扩容master或者worker节点所在的物理机已经安装了调度的服务,请直接跳到 [1.4.修改配置]. 编辑 ** 所有 ** 节点上的配置文件 `conf/config/install_config.conf`. 新增masters或者workers参数,重启调度集群即可. 如果扩容master或者worker节点所在的物理机已经安装了调度的服务,请直接跳到 [1.4.修改配置]. 编辑 ** 所有 ** 节点上的配置文件 `bin/env/install_env.sh`. 新增masters或者workers参数,重启调度集群即可.
``` ```
### 1.1. 基础软件安装(必装项请自行安装) ### 1.1. 基础软件安装(必装项请自行安装)
@ -98,7 +98,7 @@ sed -i 's/Defaults requirett/#Defaults requirett/g' /etc/sudoers
```shell ```shell
sudo ln -s /opt/soft/java/bin/java /usr/bin/java sudo ln -s /opt/soft/java/bin/java /usr/bin/java
``` ```
- 修改 **所有** 节点上的配置文件 `conf/config/install_config.conf`, 同步修改以下配置. - 修改 **所有** 节点上的配置文件 `bin/env/install_env.sh`, 同步修改以下配置.
* 新增的master节点, 需要修改 ips 和 masters 参数. * 新增的master节点, 需要修改 ips 和 masters 参数.
* 新增的worker节点, 需要修改 ips 和 workers 参数. * 新增的worker节点, 需要修改 ips 和 workers 参数.
@ -223,7 +223,7 @@ AlertServer ----- alert服务
### 2.2 修改配置文件 ### 2.2 修改配置文件
- 修改 **所有** 节点上的配置文件 `conf/config/install_config.conf`, 同步修改以下配置. - 修改 **所有** 节点上的配置文件 `bin/env/install_env.sh`, 同步修改以下配置.
* 缩容master节点, 需要修改 ips 和 masters 参数. * 缩容master节点, 需要修改 ips 和 masters 参数.
* 缩容worker节点, 需要修改 ips 和 workers 参数. * 缩容worker节点, 需要修改 ips 和 workers 参数.

4
docs/docs/zh/guide/upgrade/upgrade.md

@ -39,7 +39,7 @@ jar 包 并添加到 `./tools/libs` 目录下,设置以下环境变量
### 服务升级 ### 服务升级
#### 修改 `bin/env/install_config.conf` 配置内容 #### 修改 `bin/env/install_env.sh` 配置内容
- 伪集群部署请参照[伪集群部署(Pseudo-Cluster)](../installation/pseudo-cluster.md)中的 `修改相关配置` - 伪集群部署请参照[伪集群部署(Pseudo-Cluster)](../installation/pseudo-cluster.md)中的 `修改相关配置`
- 集群部署请参照[集群部署(Cluster)](../installation/cluster.md)中的 `修改相关配置` - 集群部署请参照[集群部署(Cluster)](../installation/cluster.md)中的 `修改相关配置`
@ -66,7 +66,7 @@ jar 包 并添加到 `./tools/libs` 目录下,设置以下环境变量
| 1 | service1 | 192.168.xx.10 | | 1 | service1 | 192.168.xx.10 |
| 2 | service2 | 192.168.xx.11,192.168.xx.12 | | 2 | service2 | 192.168.xx.11,192.168.xx.12 |
- 修改 `bin/env/install_config.conf` 中的 workers 参数 - 修改 `bin/env/install_env.sh` 中的 workers 参数
假设以下为要部署的 worker 主机名和 ip 的对应关系 假设以下为要部署的 worker 主机名和 ip 的对应关系
| 主机名 | ip | | 主机名 | ip |

Loading…
Cancel
Save