password/src/main/java/TableLayout.java

import java.awt.*;
import java.io.Serializable;
import java.lang.reflect.Method;
import java.util.LinkedList;
import java.util.ListIterator;



public class TableLayout implements LayoutManager2, Serializable {
/*
    Note: In this file, a cr refers to either a column or a row.  cr[C] always
    means column and cr[R] always means row.  A cr size is either a column
    width or a row Height.  TableLayout views columns and rows as being
    conceptually symmetric.  Therefore, much of the code applies to both
    columns and rows, and the use of the cr terminology eliminates redundancy.
    Also, for ease of reading, z always indicates a parameter whose value is
    either C or R.
*/
    /** Default row/column size */
    protected static final double defaultSize[][] = {{}, {}};

    /** Indicates a column */
    protected static final int C = 0;

    /** Indicates a row */
    protected static final int R = 1;

    /** Used to minimize reflection calls */
    protected static boolean checkForComponentOrientationSupport = true;

    /** Method used to get component orientation while preserving compatability
     with earlier versions of java.awt.Container.  Necessary for supporting
     older JDKs and MicroEdition versions of Java. */
    protected static Method methodGetComponentOrientation;


    /** Sizes of crs expressed in absolute and relative terms */
    protected double crSpec[][] = {null, null};

    /** Sizes of crs in pixels */
    protected int crSize[][] = {null, null};

    /** Offsets of crs in pixels.  The left boarder of column n is at
     crOffset[C][n] and the right boarder is at cr[C][n + 1] for all
     columns including the last one.  crOffset[C].length = crSize[C].length + 1 */
    protected int crOffset[][] = {null, null};


    /** List of components and their sizes */
    protected LinkedList<Entry> list;

    /** Indicates whether or not the size of the cells are known for the last known
     size of the container.  If dirty is true or the container has been resized,
     the cell sizes must be recalculated using calculateSize. */
    protected boolean dirty;

    /** Previous known width of the container */
    protected int oldWidth;

    /** Previous known height of the container */
    protected int oldHeight;

    /** Horizontal gap between columns */
    protected int hGap;

    /** Vertical gap between rows */
    protected int vGap;
    /** Indicates that the component is left justified in its cell */
    public static final int LEFT = 0;
    /** Indicates that the component is top justified in its cell */
    public static final int TOP = 0;
    /** Indicates that the component is centered in its cell */
    public static final int CENTER = 1;
    /** Indicates that the component is full justified in its cell */
    public static final int FULL = 2;
    /** Indicates that the component is bottom justified in its cell */
    public static final int BOTTOM = 3;
    /** Indicates that the component is right justified in its cell */
    public static final int RIGHT = 3;
    /** Indicates that the component is leading justified in its cell.
     Leading justification means components are left justified if their container
     is left-oriented and right justified if their container is right-oriented.
     Trailing justification is opposite.
     see java.awt.Component#getComponentOrientation */
    public static final int LEADING = 4;
    /** Indicates that the component is trailing justified in its cell.
     Trailing justification means components are right justified if their
     container is left-oriented and left justified if their container is
     right-oriented. Leading justification is opposite.
     see java.awt.Component#getComponentOrientation */
    public static final int TRAILING = 5;
    /** Indicates that the row/column should fill the available space */
    public static final double FILL = -1.0;
    /** Indicates that the row/column should be allocated just enough space to
     accomidate the preferred size of all components contained completely within
     this row/column. */
    public static final double PREFERRED = -2.0;
    /** Indicates that the row/column should be allocated just enough space to
     accomidate the minimum size of all components contained completely within
     this row/column. */
    public static final double MINIMUM = -3.0;



//******************************************************************************
//** Constructors                                                            ***
//******************************************************************************



    /**
     * Constructs an instance of TableLayout.  This TableLayout will have no columns
     * or rows.  This constructor is most useful for bean-oriented programming and
     * dynamically adding columns and rows.
     */

    public TableLayout() {
        init(defaultSize[C], defaultSize[R]);
    }


    /**
     * Constructs an instance of TableLayout.
     *
     * @param size    widths of columns and heights of rows in the format,
     *                {{col0, col1, col2, ..., colN}, {row0, row1, row2, ..., rowM}}
     *                If this parameter is invalid, the TableLayout will have
     *                exactly one row and one column.
     */

    public TableLayout(double[][] size) {
        // Make sure columns and rows and nothing else is specified
        if ((size != null) && (size.length == 2))
            init(size[C], size[R]);
        else
            throw new IllegalArgumentException
                    ("Parameter size should be an array, a[2], where a[0] is the " +
                            "is an array of column widths and a[1] is an array or row " +
                            "heights.");
    }


    /**
     * Constructs an instance of TableLayout.
     *
     * @param col    widths of columns in the format, {{col0, col1, col2, ..., colN}
     * @param row    heights of rows in the format, {{row0, row1, row2, ..., rowN}
     */

    public TableLayout(double[] col, double[] row) {
        init(col, row);
    }


    /**
     * Initializes the TableLayout for all constructors.
     *
     * @param col    widths of columns in the format, {{col0, col1, col2, ..., colN}
     * @param row    heights of rows in the format, {{row0, row1, row2, ..., rowN}
     */

    protected void init(double[] col, double[] row) {
        // Check parameters
        if (col == null)
            throw new IllegalArgumentException("Parameter col cannot be null");

        if (row == null)
            throw new IllegalArgumentException("Parameter row cannot be null");

        // Create new rows and columns
        crSpec[C] = new double[col.length];
        crSpec[R] = new double[row.length];

        // Copy rows and columns
        System.arraycopy(col, 0, crSpec[C], 0, crSpec[C].length);
        System.arraycopy(row, 0, crSpec[R], 0, crSpec[R].length);

        // Make sure rows and columns are valid
        for (int counter = 0; counter < crSpec[C].length; counter++)
            if ((crSpec[C][counter] < 0.0) &&
                    (crSpec[C][counter] != FILL) &&
                    (crSpec[C][counter] != PREFERRED) &&
                    (crSpec[C][counter] != MINIMUM)) {
                crSpec[C][counter] = 0.0;
            }

        for (int counter = 0; counter < crSpec[R].length; counter++)
            if ((crSpec[R][counter] < 0.0) &&
                    (crSpec[R][counter] != FILL) &&
                    (crSpec[R][counter] != PREFERRED) &&
                    (crSpec[R][counter] != MINIMUM)) {
                crSpec[R][counter] = 0.0;
            }

        // Create an empty list of components
        list = new LinkedList<Entry>();

        // Indicate that the cell sizes are not known
        dirty = true;
    }



//******************************************************************************
//** Get/Set methods                                                         ***
//******************************************************************************



    /**
     * Gets the constraints of a given component.
     *
     * @param component    desired component
     *
     * @return If the given component is found, the constraints associated with
     *         that component.  If the given component is null or is not found,
     *         null is returned.
     */

    public TableLayoutConstraints getConstraints(Component component) {
        ListIterator<Entry> iterator = list.listIterator(0);

        while (iterator.hasNext()) {
            Entry entry = iterator.next();

            if (entry.component == component)
                return new TableLayoutConstraints
                        (entry.cr1[C], entry.cr1[R], entry.cr2[C], entry.cr2[R],
                                entry.alignment[C], entry.alignment[R]);
        }

        return null;
    }


    /**
     * Sets the constraints of a given component.
     *
     * @param component     desired component.  This parameter cannot be null.
     * @param constraint    new set of constraints.  This parameter cannot be null.
     */

    public void setConstraints
    (Component component, TableLayoutConstraints constraint) {
        // Check parameters
        if (component == null)
            throw new IllegalArgumentException
                    ("Parameter component cannot be null.");
        else if (constraint == null)
            throw new IllegalArgumentException
                    ("Parameter constraint cannot be null.");

        // Find and update constraints for the given component
        ListIterator<Entry> iterator = list.listIterator(0);

        while (iterator.hasNext()) {
            Entry entry = iterator.next();

            if (entry.component == component)
                iterator.set(new Entry(component, constraint));
        }
    }


    /**
     * Adjusts the number and sizes of rows in this layout.  After calling this
     * method, the caller should request this layout manager to perform the
     * layout.  This can be done with the following code:
     *
     * <pre>
     *     layout.layoutContainer(container);
     *     container.repaint();
     * </pre>
     *
     * or
     *
     * <pre>
     *     window.pack()
     * </pre>
     *
     * If this is not done, the changes in the layout will not be seen until the
     * container is resized.
     *
     * @param column    widths of each of the columns
     *
     * @see #getColumn
     */

    public void setColumn(double column[]) {
        setCr(C, column);
    }


    /**
     * Adjusts the number and sizes of rows in this layout.  After calling this
     * method, the caller should request this layout manager to perform the
     * layout.  This can be done with the following code:
     *
     * <code>
     *     layout.layoutContainer(container);
     *     container.repaint();
     * </code>
     *
     * or
     *
     * <pre>
     *     window.pack()
     * </pre>
     *
     * If this is not done, the changes in the layout will not be seen until the
     * container is resized.
     *
     * @param row    heights of each of the rows.  This parameter cannot be null.
     *
     * @see #getRow
     */

    public void setRow(double row[]) {
        setCr(R, row);
    }


    /**
     * Sets the sizes of rows or columns for the methods setRow or setColumn.
     *
     * @param z       indicates row or column
     * @param size    new cr size
     */

    protected void setCr(int z, double size[]) {
        // Copy crs
        crSpec[z] = new double[size.length];
        System.arraycopy(size, 0, crSpec[z], 0, crSpec[z].length);

        // Make sure rows are valid
        for (int counter = 0; counter < crSpec[z].length; counter++)
            if ((crSpec[z][counter] < 0.0) &&
                    (crSpec[z][counter] != FILL) &&
                    (crSpec[z][counter] != PREFERRED) &&
                    (crSpec[z][counter] != MINIMUM)) {
                crSpec[z][counter] = 0.0;
            }

        // Indicate that the cell sizes are not known
        dirty = true;
    }


    /**
     * Adjusts the width of a single column in this layout.  After calling this
     * method, the caller should request this layout manager to perform the
     * layout.  This can be done with the following code:
     *
     * <code>
     *     layout.layoutContainer(container);
     *     container.repaint();
     * </code>
     *
     * or
     *
     * <pre>
     *     window.pack()
     * </pre>
     *
     * If this is not done, the changes in the layout will not be seen until the
     * container is resized.
     *
     * @param i       zero-based index of column to set.  If this parameter is not
     *                valid, an ArrayOutOfBoundsException will be thrown.
     * @param size    width of the column.  This parameter cannot be null.
     *
     * @see #getColumn
     */

    public void setColumn(int i, double size) {
        setCr(C, i, size);
    }


    /**
     * Adjusts the height of a single row in this layout.  After calling this
     * method, the caller should request this layout manager to perform the
     * layout.  This can be done with the following code:
     *
     * <code>
     *     layout.layoutContainer(container);
     *     container.repaint();
     * </code>
     *
     * or
     *
     * <pre>
     *     window.pack()
     * </pre>
     *
     * If this is not done, the changes in the layout will not be seen until the
     * container is resized.
     *
     * @param i       zero-based index of row to set.  If this parameter is not
     *                valid, an ArrayOutOfBoundsException will be thrown.
     * @param size    height of the row.  This parameter cannot be null.
     *
     * @see #getRow
     */

    public void setRow(int i, double size) {
        setCr(R, i, size);
    }


    /**
     * Sets the sizes of rows or columns for the methods setRow or setColumn.
     *
     * @param z       indicates row or column
     * @param i       indicates which cr to resize
     * @param size    new cr size
     */


    protected void setCr(int z, int i, double size) {
        // Make sure size is valid
        if ((size < 0.0) &&
                (size != FILL) &&
                (size != PREFERRED) &&
                (size != MINIMUM)) {
            size = 0.0;
        }

        // Copy new size
        crSpec[z][i] = size;

        // Indicate that the cell sizes are not known
        dirty = true;
    }


    /**
     * Gets the sizes of columns in this layout.
     *
     * @return widths of each of the columns
     *
     * @see #setColumn
     */

    public double[] getColumn() {
        // Copy columns
        double column[] = new double[crSpec[C].length];
        System.arraycopy(crSpec[C], 0, column, 0, column.length);

        return column;
    }


    /**
     * Gets the height of a single row in this layout.
     *
     * @return height of the requested row
     *
     * @see #setRow
     */

    public double[] getRow() {
        // Copy rows
        double row[] = new double[crSpec[R].length];
        System.arraycopy(crSpec[R], 0, row, 0, row.length);

        return row;
    }


    /**
     * Gets the width of a single column in this layout.
     *
     * @param i    zero-based index of row to get.  If this parameter is not valid,
     *             an ArrayOutOfBoundsException will be thrown.
     *
     * @return width of the requested column
     *
     * @see #setRow
     */

    public double getColumn(int i) {
        return crSpec[C][i];
    }


    /**
     * Gets the sizes of a row in this layout.
     *
     * @param i    zero-based index of row to get.  If this parameter is not valid,
     *             an ArrayOutOfBoundsException will be thrown.
     *
     * @return height of each of the requested row
     *
     * @see #setRow
     */

    public double getRow(int i) {
        return crSpec[R][i];
    }


    /**
     * Gets the number of columns in this layout.
     *
     * @return the number of columns
     */

    public int getNumColumn() {
        return crSpec[C].length;
    }


    /**
     * Gets the number of rows in this layout.
     *
     * @return the number of rows
     */

    public int getNumRow() {
        return crSpec[R].length;
    }


    /**
     * Gets the horizontal gap between colunns.
     *
     * @return the horizontal gap in pixels
     */

    public int getHGap() {
        return hGap;
    }


    /**
     * Gets the vertical gap between rows.
     *
     * @return the vertical gap in pixels
     */

    public int getVGap() {
        return vGap;
    }


    /**
     * Sets the horizontal gap between colunns.
     *
     * @param hGap    the horizontal gap in pixels
     */

    public void setHGap(int hGap) {
        if (hGap >= 0)
            this.hGap = hGap;
        else
            throw new IllegalArgumentException
                    ("Parameter hGap must be non-negative.");
    }


    /**
     * Sets the vertical gap between rows.
     *
     * @param vGap    the horizontal gap in pixels
     */

    public void setVGap(int vGap) {
        if (vGap >= 0)
            this.vGap = vGap;
        else
            throw new IllegalArgumentException
                    ("Parameter vGap must be non-negative.");
    }



//******************************************************************************
//** Insertion/Deletion methods                                              ***
//******************************************************************************



    /**
     * Inserts a column in this layout.  All components to the right of the
     * insertion point are moved right one column.  The container will need to
     * be laid out after this method returns.  See <code>setColumn</code>.
     *
     * @param i       zero-based index at which to insert the column
     * @param size    size of the column to be inserted
     *
     * @see #setColumn
     * @see #deleteColumn
     */

    public void insertColumn(int i, double size) {
        insertCr(C, i, size);
    }


    /**
     * Inserts a row in this layout.  All components below the insertion point
     * are moved down one row.  The container will need to be laid out after this
     * method returns.  See <code>setRow</code>.
     *
     * @param i       zero-based index at which to insert the row
     * @param size    size of the row to be inserted
     *
     * @see #setRow
     * @see #deleteRow
     */

    public void insertRow(int i, double size) {
        insertCr(R, i, size);
    }


    /**
     * Inserts a cr for the methods insertRow or insertColumn.
     *
     * @param z       indicates row or column
     * @param i       zero-based index at which to insert the cr
     * @param size    size of cr being inserted
     */

    public void insertCr(int z, int i, double size) {
        // Make sure position is valid
        if ((i < 0) || (i > crSpec[z].length))
            throw new IllegalArgumentException
                    ("Parameter i is invalid.  i = " + i + ".  Valid range is [0, " +
                            crSpec[z].length + "].");

        // Make sure row size is valid
        if ((size < 0.0) &&
                (size != FILL) &&
                (size != PREFERRED) &&
                (size != MINIMUM)) {
            size = 0.0;
        }

        // Copy crs
        double cr[] = new double[crSpec[z].length + 1];
        System.arraycopy(crSpec[z], 0, cr, 0, i);
        System.arraycopy(crSpec[z], i, cr, i + 1, crSpec[z].length - i);

        // Insert cr
        cr[i] = size;
        crSpec[z] = cr;

        // Move all components that are below the new cr
        ListIterator<Entry> iterator = list.listIterator(0);

        while (iterator.hasNext()) {
            // Get next entry
            Entry entry = iterator.next();

            // Is the first cr below the new cr
            if (entry.cr1[z] >= i)
                // Move first cr
                entry.cr1[z]++;

            // Is the second cr below the new cr
            if (entry.cr2[z] >= i)
                // Move second cr
                entry.cr2[z]++;
        }

        // Indicate that the cell sizes are not known
        dirty = true;
    }


    /**
     * Deletes a column in this layout.  All components to the right of the
     * deletion point are moved left one column.  The container will need to
     * be laid out after this method returns.  See <code>setColumn</code>.
     *
     * @param i    zero-based index of column to delete
     *
     * @see #setColumn
     * @see #deleteColumn
     */

    public void deleteColumn(int i) {
        deleteCr(C, i);
    }


    /**
     * Deletes a row in this layout.  All components below the deletion point are
     * moved up one row.  The container will need to be laid out after this method
     * returns.  See <code>setRow</code>.  There must be at least two rows in order
     * to delete a row.
     *
     * @param i    zero-based index of row to delete
     *
     * @see #setRow
     * @see #deleteRow
     */

    public void deleteRow(int i) {
        deleteCr(R, i);
    }


    /**
     * Deletes a cr for the methods deleteRow or deleteColumn.
     *
     * @param z       indicates row or column
     * @param i       zero-based index of cr to delete
     */

    protected void deleteCr(int z, int i) {
        // Make sure position is valid
        if ((i < 0) || (i >= crSpec[z].length))
            throw new IllegalArgumentException
                    ("Parameter i is invalid.  i = " + i + ".  Valid range is [0, " +
                            (crSpec[z].length - 1) + "].");

        // Copy rows
        double cr[] = new double[crSpec[z].length - 1];
        System.arraycopy(crSpec[z], 0, cr, 0, i);
        System.arraycopy(crSpec[z], i + 1, cr, i, crSpec[z].length - i - 1);

        // Delete row
        crSpec[z] = cr;

        // Move all components that are to below the row deleted
        ListIterator<Entry> iterator = list.listIterator(0);

        while (iterator.hasNext()) {
            // Get next entry
            Entry entry =  iterator.next();

            // Is the first row below the new row
            if (entry.cr1[z] > i)
                // Move first row
                entry.cr1[z]--;

            // Is the second row below the new row
            if (entry.cr2[z] > i)
                // Move second row
                entry.cr2[z]--;
        }

        // Indicate that the cell sizes are not known
        dirty = true;
    }



//******************************************************************************
//** Misc methods                                                            ***
//******************************************************************************



    /**
     * Converts this TableLayout to a string.
     *
     * @return a string representing the columns and row sizes in the form
     *         "{{col0, col1, col2, ..., colN}, {row0, row1, row2, ..., rowM}}"
     */

    public String toString() {
        int counter;

        String value = "TableLayout {{";

        if (crSpec[C].length > 0) {
            for (counter = 0; counter < crSpec[C].length - 1; counter++)
                value += crSpec[C][counter] + ", ";

            value += crSpec[C][crSpec[C].length - 1] + "}, {";
        } else
            value += "}, {";

        if (crSpec[R].length > 0) {
            for (counter = 0; counter < crSpec[R].length - 1; counter++)
                value += crSpec[R][counter] + ", ";

            value += crSpec[R][crSpec[R].length - 1] + "}}";
        } else
            value += "}}";

        return value;
    }


    /**
     * Determines whether or not there are any components with invalid constraints.
     * An invalid constraint is one that references a non-existing row or column.
     * For example, on a table with five rows, row -1 and row 5 are both invalid.
     * Valid rows are 0 through 4, inclusively.  This method is useful for
     * debugging.
     *
     * @return a list of TableLayout.Entry instances refering to the invalid
     *         constraints and corresponding components
     *
     * @see #getOverlappingEntry
     */

    public java.util.List<Entry> getInvalidEntry() {
        LinkedList<Entry> listInvalid = new LinkedList<Entry>();

        try {
            ListIterator<Entry> iterator = list.listIterator(0);

            while (iterator.hasNext()) {
                Entry entry = iterator.next();

                if ((entry.cr1[R] < 0) || (entry.cr1[C] < 0) ||
                        (entry.cr2[R] >= crSpec[R].length) ||
                        (entry.cr2[C] >= crSpec[C].length)) {
                    listInvalid.add(entry.copy());
                }
            }
        } catch (CloneNotSupportedException error) {
            throw new RuntimeException("Unexpected CloneNotSupportedException");
        }

        return listInvalid;
    }


    /**
     * Gets a list of overlapping components and their constraints.  Two
     * components overlap if they cover at least one common cell.  This method is
     * useful for debugging.
     *
     * @return a list of zero or more TableLayout.Entry instances
     *
     * @see #getInvalidEntry
     */

    public java.util.List<Entry> getOverlappingEntry() {
        LinkedList<Entry> listOverlapping = new LinkedList<Entry>();

        try {
            // Count contraints
            int numEntry = list.size();

            // If there are no components, they can't be overlapping
            if (numEntry == 0)
                return listOverlapping;

            // Put entries in an array
            Entry entry[] =  list.toArray(new Entry[numEntry]);

            // Check all components
            for (int knowUnique = 1; knowUnique < numEntry; knowUnique++)
                for (int checking = knowUnique - 1; checking >= 0; checking--)
                    if
                    (
                            (
                                    (entry[checking].cr1[C] >= entry[knowUnique].cr1[C]) &&
                                            (entry[checking].cr1[C] <= entry[knowUnique].cr2[C]) &&
                                            (entry[checking].cr1[R] >= entry[knowUnique].cr1[R]) &&
                                            (entry[checking].cr1[R] <= entry[knowUnique].cr2[R])
                            )
                                    ||
                                    (
                                            (entry[checking].cr2[C] >= entry[knowUnique].cr1[C]) &&
                                                    (entry[checking].cr2[C] <= entry[knowUnique].cr2[C]) &&
                                                    (entry[checking].cr2[R] >= entry[knowUnique].cr1[R]) &&
                                                    (entry[checking].cr2[R] <= entry[knowUnique].cr2[R])
                                    )
                    ) {
                        listOverlapping.add(entry[checking].copy());
                    }
        } catch (CloneNotSupportedException error) {
            throw new RuntimeException("Unexpected CloneNotSupportedException");
        }

        return listOverlapping;
    }



//******************************************************************************
//** Calculation methods                                                     ***
//******************************************************************************



    /**
     * Calculates the sizes of the rows and columns based on the absolute and
     * relative sizes specified in <code>crSpec[R]</code> and <code>crSpec[C]</code>
     * and the size of the container.  The result is stored in <code>crSize[R]</code>
     * and <code>crSize[C]</code>.
     *
     * @param container    container using this TableLayout
     */

    protected void calculateSize(Container container) {
        // Get the container's insets
        Insets inset = container.getInsets();

        // Get the size of the container's available space
        Dimension d = container.getSize();
        int availableWidth = d.width - inset.left - inset.right;
        int availableHeight = d.height - inset.top - inset.bottom;

        // Compensate for horiztonal and vertical gaps
        if (crSpec[C].length > 0)
            availableWidth -= hGap * (crSpec[C].length - 1);

        if (crSpec[R].length > 0)
            availableHeight -= vGap * (crSpec[R].length - 1);

        // Create array to hold actual sizes in pixels
        crSize[C] = new int[crSpec[C].length];
        crSize[R] = new int[crSpec[R].length];

        // Assign absolute sizes (must be done before assignPrefMinSize)
        availableWidth = assignAbsoluteSize(C, availableWidth);
        availableHeight = assignAbsoluteSize(R, availableHeight);

        // Assign preferred and minimum sizes (must be done after assignAbsoluteSize)
        availableWidth = assignPrefMinSize(C, availableWidth, MINIMUM);
        availableWidth = assignPrefMinSize(C, availableWidth, PREFERRED);
        availableHeight = assignPrefMinSize(R, availableHeight, MINIMUM);
        availableHeight = assignPrefMinSize(R, availableHeight, PREFERRED);

        // Assign relative sizes
        availableWidth = assignRelativeSize(C, availableWidth);
        availableHeight = assignRelativeSize(R, availableHeight);

        // Assign fill sizes
        assignFillSize(C, availableWidth);
        assignFillSize(R, availableHeight);

        // Calculate cr offsets for effeciency
        calculateOffset(C, inset);
        calculateOffset(R, inset);

        // Indicate that the size of the cells are known for the container's
        // current size
        dirty = false;
        oldWidth = d.width;
        oldHeight = d.height;
    }


    /**
     * Assigns absolute sizes.
     *
     * @param z                indicates row or column
     * @param availableSize    amount of space available in the container
     *
     * @return the amount of space available after absolute crs have been assigned
     *         sizes
     */

    protected int assignAbsoluteSize(int z, int availableSize) {
        int numCr = crSpec[z].length;

        for (int counter = 0; counter < numCr; counter++)
            if ((crSpec[z][counter] >= 1.0) || (crSpec[z][counter] == 0.0)) {
                crSize[z][counter] = (int) (crSpec[z][counter] + 0.5);
                availableSize -= crSize[z][counter];
            }

        return availableSize;
    }


    /**
     * Assigns relative sizes.
     *
     * @param z                indicates row or column
     * @param availableSize    amount of space available in the container
     *
     * @return the amount of space available after relative crs have been assigned
     *         sizes
     */

    protected int assignRelativeSize(int z, int availableSize) {
        int relativeSize = (availableSize < 0) ? 0 : availableSize;
        int numCr = crSpec[z].length;

        for (int counter = 0; counter < numCr; counter++)
            if ((crSpec[z][counter] > 0.0) && (crSpec[z][counter] < 1.0)) {
                crSize[z][counter] =
                        (int) (crSpec[z][counter] * relativeSize + 0.5);

                availableSize -= crSize[z][counter];
            }

        return availableSize;
    }


    /**
     * Assigns FILL sizes.
     *
     * @param z                indicates row or column
     * @param availableSize    amount of space available in the container
     */

    protected void assignFillSize(int z, int availableSize) {
        // Skip if there is no more space to allocate
        if (availableSize <= 0)
            return;

        // Count the number of "fill" cells
        int numFillSize = 0;
        int numCr = crSpec[z].length;

        for (int counter = 0; counter < numCr; counter++)
            if (crSpec[z][counter] == FILL)
                numFillSize++;

        // If numFillSize is zero, the if statement below will always evaluate to
        // false and the division will not occur.

        // If there are more than one "fill" cell, slack may occur due to rounding
        // errors
        int slackSize = availableSize;

        // Assign "fill" cells equal amounts of the remaining space
        for (int counter = 0; counter < numCr; counter++)
            if (crSpec[z][counter] == FILL) {
                crSize[z][counter] = availableSize / numFillSize;
                slackSize -= crSize[z][counter];
            }

        // Assign one pixel of slack to each FILL cr, starting at the last one,
        // until all slack has been consumed
        for (int counter = numCr - 1; (counter >= 0) && (slackSize > 0); counter--) {
            if (crSpec[z][counter] == FILL) {
                crSize[z][counter]++;
                slackSize--;
            }
        }
    }


    /**
     * Calculates the offset of each cr.
     *
     * @param z    indicates row or column
     */

    protected void calculateOffset(int z, Insets inset) {
        int numCr = crSpec[z].length;

        crOffset[z] = new int[numCr + 1];
        crOffset[z][0] = (z == C) ? inset.left : inset.top;

        for (int counter = 0; counter < numCr; counter++)
            crOffset[z][counter + 1] =
                    crOffset[z][counter] + crSize[z][counter];
    }


    /**
     * Assigned sizes to preferred and minimum size columns and rows.  This
     * reduces the available width and height.  Minimum widths/heights must be
     * calculated first because they affect preferred widths/heights, but not vice
     * versa.  The end result is that any component contained wholly or partly in
     * a column/row of minimum/preferred width or height will get at least its
     * minimum/preferred width or height, respectively.
     *
     * @param z                indicates row or column
     * @param availableSize    amount of space available in the container
     * @param typeOfSize       indicates preferred or minimum
     *
     * @return the amount of space available after absolute crs have been assigned
     *         sizes
     */

    protected int assignPrefMinSize
    (int z, int availableSize, double typeOfSize) {
        // Get variables referring to columns or rows (crs)
        int numCr = crSpec[z].length;

        // Address every cr
        for (int counter = 0; counter < numCr; counter++)
            // Is the current cr a preferred/minimum (based on typeOfSize) size
            if (crSpec[z][counter] == typeOfSize) {
                // Assume a maximum width of zero
                int maxSize = 0;

                // Find maximum preferred/min width of all components completely
                // or partially contained within this cr
                ListIterator<Entry> iterator = list.listIterator(0);

                nextComponent:
                while (iterator.hasNext()) {
                    Entry entry = iterator.next();

                    // Skip invalid entries
                    if ((entry.cr1[z] < 0) || (entry.cr2[z] >= numCr))
                        continue nextComponent;

                    // Find the maximum desired size of this cr based on all crs
                    // the current component occupies
                    if ((entry.cr1[z] <= counter) && (entry.cr2[z] >= counter)) {
                        // Setup size and number of adjustable crs
                        Dimension p = (typeOfSize == PREFERRED) ?
                                entry.component.getPreferredSize() :
                                entry.component.getMinimumSize();

                        int size = (p == null) ? 0 :
                                ((z == C) ? p.width : p.height);
                        int numAdjustable = 0;

                        // Calculate for preferred size
                        if (typeOfSize == PREFERRED)
                            // Consider all crs this component occupies
                            for (int entryCr = entry.cr1[z];
                                 entryCr <= entry.cr2[z]; entryCr++) {
                                // Subtract absolute, relative, and minumum cr
                                // sizes, which have already been calculated
                                if ((crSpec[z][entryCr] >= 0.0) ||
                                        (crSpec[z][entryCr] == MINIMUM)) {
                                    size -= crSize[z][entryCr];
                                }
                                // Count preferred/min width columns
                                else if (crSpec[z][entryCr] == PREFERRED)
                                    numAdjustable++;
                                    // Skip any component that occupies a fill cr
                                    // because the fill should fulfill the size
                                    // requirements
                                else if (crSpec[z][entryCr] == FILL)
                                    continue nextComponent;
                            }
                            // Calculate for minimum size
                        else
                            // Consider all crs this component occupies
                            for (int entryCr = entry.cr1[z];
                                 entryCr <= entry.cr2[z]; entryCr++) {
                                // Subtract absolute and relative cr sizes, which
                                // have already been calculated
                                if (crSpec[z][entryCr] >= 0.0)
                                    size -= crSize[z][entryCr];
                                    // Count preferred/min width columns
                                else if ((crSpec[z][entryCr] == PREFERRED) ||
                                        (crSpec[z][entryCr] == MINIMUM)) {
                                    numAdjustable++;
                                }
                                // Skip any component that occupies a fill cr
                                // because the fill should fulfill the size
                                // requirements
                                else if (crSpec[z][entryCr] == FILL)
                                    continue nextComponent;
                            }

                        // Divide the size evenly among the adjustable crs
                        size = (int) Math.ceil(size / (double) numAdjustable);

                        // Take the maximumn size
                        if (maxSize < size)
                            maxSize = size;
                    }
                }

                // Assign preferred size
                crSize[z][counter] = maxSize;

                // Reduce available size
                availableSize -= maxSize;
            }

        return availableSize;
    }



//******************************************************************************
//** java.awt.event.LayoutManager methods                                    ***
//******************************************************************************



    /**
     * To lay out the specified container using this layout.  This method reshapes
     * the components in the specified target container in order to satisfy the
     * constraints of all components.
     *
     * <p>User code should not have to call this method directly.</p>
     *
     * @param container    container being served by this layout manager
     */

    public void layoutContainer(Container container) {
        // Calculate sizes if container has changed size or components were added
        Dimension d = container.getSize();

        if (dirty || (d.width != oldWidth) || (d.height != oldHeight))
            calculateSize(container);

        // Get component orientation and insets
        ComponentOrientation co = getComponentOrientation(container);
        boolean isRightToLeft = (co != null) && !co.isLeftToRight();
        Insets insets = container.getInsets();

        // Get components
        Component component[] = container.getComponents();

        // Layout components
        for (int counter = 0; counter < component.length; counter++) {
            try {
                // Get the entry for the next component
                ListIterator<Entry> iterator = list.listIterator(0);
                Entry entry = null;

                while (iterator.hasNext()) {
                    entry =  iterator.next();

                    if (entry.component == component[counter])
                        break;
                    else
                        entry = null;
                }

                // Skip any components that have not been place in a specific cell,
                // setting the skip component's bounds to zero
                if (entry == null) {
                    component[counter].setBounds(0, 0, 0, 0);
                    continue;
                }

                // The following block of code has been optimized so that the
                // preferred size of the component is only obtained if it is
                // needed.  There are components in which the getPreferredSize
                // method is extremely expensive, such as data driven controls
                // with a large amount of data.

                // Get the preferred size of the component
                int preferredWidth = 0;
                int preferredHeight = 0;

                if ((entry.alignment[C] != FULL) || (entry.alignment[R] != FULL)) {
                    Dimension preferredSize =
                            component[counter].getPreferredSize();

                    preferredWidth = preferredSize.width;
                    preferredHeight = preferredSize.height;
                }

                // Calculate the coordinates and size of the component
                int value[] = calculateSizeAndOffset(entry, preferredWidth, true);
                int x = value[0];
                int w = value[1];
                value = calculateSizeAndOffset(entry, preferredHeight, false);
                int y = value[0];
                int h = value[1];

                // Compensate for component orientation.
                if (isRightToLeft)
                    x = d.width - x - w + insets.left - insets.right;

                // Move and resize component
                component[counter].setBounds(x, y, w, h);
            } catch (Exception error) {
                // If any error occurs, set the bounds of this component to zero
                // and continue
                component[counter].setBounds(0, 0, 0, 0);
                continue;
            }
        }
    }


    /**
     * Gets the container's component orientation.  If a JDK that does not support
     * component orientation is being used, then null is returned.
     *
     * @param container    Container whose orientation is being queried
     *
     * @return the container's orientation or null if no orientation is supported
     */

    protected ComponentOrientation getComponentOrientation(Container container) {
        // This method is implemented to only get the class and method objects
        // once so as to reduce expensive reflection operations.  If the reflection
        // fails, then component orientation is not supported.

        ComponentOrientation co = null;

        try {
            if (checkForComponentOrientationSupport) {
                methodGetComponentOrientation =
                        Class.forName("java.awt.Container").getMethod
                                ("getComponentOrientation", new Class[0]);

                checkForComponentOrientationSupport = false;
            }

            if (methodGetComponentOrientation != null) {
                co = (ComponentOrientation)
                        methodGetComponentOrientation.invoke(container, new Object[0]);
            }
        } catch (Exception e) {
        }

        return co;
    }


    /**
     * Calculates the vertical/horizontal offset and size of a component.
     *
     * @param entry    entry containing component and contraints
     * @param preferredSize    previously calculated preferred width/height of
     *                         component
     * @param isColumn         if true, this method is being called to calculate
     *                         the offset/size of a column.  if false,... of a row.
     *
     * @return an array, a, of two integers such that a[0] is the offset and
     *         a[1] is the size
     */

    protected int[] calculateSizeAndOffset
    (Entry entry, int preferredSize, boolean isColumn) {
        // Get references to cr properties
        int crOffset[] = isColumn ? this.crOffset[C] : this.crOffset[R];
        int entryAlignment = isColumn ? entry.alignment[C] : entry.alignment[R];

        // Determine cell set size
        int cellSetSize = isColumn ?
                crOffset[entry.cr2[C] + 1] - crOffset[entry.cr1[C]] :
                crOffset[entry.cr2[R] + 1] - crOffset[entry.cr1[R]];

        // Determine the size of the component
        int size;

        if ((entryAlignment == FULL) || (cellSetSize < preferredSize))
            size = cellSetSize;
        else
            size = preferredSize;

        // Since the component orientation is adjusted for in the layoutContainer
        // method, we can treat leading justification as left justification and
        // trailing justification as right justification.
        if (isColumn && (entryAlignment == LEADING))
            entryAlignment = LEFT;

        if (isColumn && (entryAlignment == TRAILING))
            entryAlignment = RIGHT;

        // Determine offset
        int offset;

        switch (entryAlignment) {
            case LEFT: // Align left/top side along left edge of cell
                offset = crOffset[isColumn ? entry.cr1[C] : entry.cr1[R]];
                break;

            case RIGHT: // Align right/bottom side along right edge of cell
                offset =
                        crOffset[(isColumn ? entry.cr2[C] : entry.cr2[R]) + 1] - size;
                break;

            case CENTER: // Center justify component
                offset = crOffset[isColumn ? entry.cr1[C] : entry.cr1[R]] +
                        ((cellSetSize - size) >> 1);
                break;

            case FULL: // Align left/top side along left/top edge of cell
                offset = crOffset[isColumn ? entry.cr1[C] : entry.cr1[R]];
                break;

            default : // This is a never should happen case, but just in case
                offset = 0;
        }

        // Compensate for gaps
        if (isColumn) {
            offset += hGap * entry.cr1[C];
            int cumlativeGap = hGap * (entry.cr2[C] - entry.cr1[C]);

            switch (entryAlignment) {
                case RIGHT:
                    offset += cumlativeGap;
                    break;

                case CENTER:
                    offset += cumlativeGap >> 1;
                    break;

                case FULL:
                    size += cumlativeGap;
                    break;
            }
        } else {
            offset += vGap * entry.cr1[R];
            int cumlativeGap = vGap * (entry.cr2[R] - entry.cr1[R]);

            switch (entryAlignment) {
                case BOTTOM:
                    offset += cumlativeGap;
                    break;

                case CENTER:
                    offset += cumlativeGap >> 1;
                    break;

                case FULL:
                    size += cumlativeGap;
                    break;
            }
        }

        // Package return values
        int value[] = {offset, size};
        return value;
    }


    /**
     * Determines the preferred size of the container argument using this layout.
     * The preferred size is the smallest size that, if used for the container's
     * size, will ensure that all components are at least as large as their
     * preferred size.  This method cannot guarantee that all components will be
     * their preferred size.  For example, if component A and component B are each
     * allocate half of the container's width and component A wants to be 10 pixels
     * wide while component B wants to be 100 pixels wide, they cannot both be
     * accommodated.  Since in general components rather be larger than their
     * preferred size instead of smaller, component B's request will be fulfilled.
     * The preferred size of the container would be 200 pixels.
     *
     * @param container    container being served by this layout manager
     *
     * @return a dimension indicating the container's preferred size
     */

    public Dimension preferredLayoutSize(Container container) {
        return calculateLayoutSize(container, PREFERRED);
    }


    /**
     * Determines the minimum size of the container argument using this layout.
     * The minimum size is the smallest size that, if used for the container's
     * size, will ensure that all components are at least as large as their
     * minimum size.  This method cannot guarantee that all components will be
     * their minimum size.  For example, if component A and component B are each
     * allocate half of the container's width and component A wants to be 10 pixels
     * wide while component B wants to be 100 pixels wide, they cannot both be
     * accommodated.  Since in general components rather be larger than their
     * minimum size instead of smaller, component B's request will be fulfilled.
     * The minimum size of the container would be 200 pixels.
     *
     * @param container    container being served by this layout manager
     *
     * @return a dimension indicating the container's minimum size
     */

    public Dimension minimumLayoutSize(Container container) {
        return calculateLayoutSize(container, MINIMUM);
    }


    /**
     * Calculates the preferred or minimum size for the methods preferredLayoutSize
     * and minimumLayoutSize.
     *
     * @param container     container whose size is being calculated
     * @param typeOfSize    indicates preferred or minimum
     *
     * @return a dimension indicating the container's preferred or minimum size
     */

    protected Dimension calculateLayoutSize(Container container, double typeOfSize) {
        //  Get preferred/minimum sizes
        Entry entryList[] = list.toArray(new Entry[list.size()]);
        int numEntry = entryList.length;
        Dimension prefMinSize[] = new Dimension[numEntry];

        for (int i = 0; i < numEntry; i++)
            prefMinSize[i] = (typeOfSize == PREFERRED) ?
                    entryList[i].component.getPreferredSize() :
                    entryList[i].component.getMinimumSize();

        // Calculate sizes
        int width =
                calculateLayoutSize(container, C, typeOfSize, entryList, prefMinSize);

        int height =
                calculateLayoutSize(container, R, typeOfSize, entryList, prefMinSize);

        // Compensate for container's insets
        Insets inset = container.getInsets();
        width += inset.left + inset.right;
        height += inset.top + inset.bottom;

        return new Dimension(width, height);
    }


    /**
     * Calculates the preferred or minimum size for the method
     * calculateLayoutSize(Container container, double typeOfSize).  This method
     * is passed the preferred/minimum sizes of the components so that the
     * potentially expensive methods getPreferredSize()/getMinimumSize() are not
     * called twice for the same component.
     *
     * @param container      container whose size is being calculated
     * @param z              indicates row or column
     * @param typeOfSize     indicates preferred or minimum
     * @param entryList      list of Entry objects
     * @param prefMinSize    list of preferred or minimum sizes
     *
     * @return a dimension indicating the container's preferred or minimum size
     */

    protected int calculateLayoutSize
    (Container container, int z, double typeOfSize, Entry entryList[],
     Dimension prefMinSize[]) {
        Dimension size;      // Preferred/minimum size of current component
        int scaledSize = 0;  // Preferred/minimum size of scaled components
        int temp;            // Temporary variable used to compare sizes
        int counter;         // Counting variable

        // Get number of crs
        int numCr = crSpec[z].length;

        // Determine percentage of space allocated to fill components.  This is
        // one minus the sum of all scalable components.
        double fillSizeRatio = 1.0;
        int numFillSize = 0;

        for (counter = 0; counter < numCr; counter++)
            if ((crSpec[z][counter] > 0.0) && (crSpec[z][counter] < 1.0))
                fillSizeRatio -= crSpec[z][counter];
            else if (crSpec[z][counter] == FILL)
                numFillSize++;

        // Adjust fill ratios to reflect number of fill rows/columns
        if (numFillSize > 1)
            fillSizeRatio /= numFillSize;

        // Cap fill ratio bottoms to 0.0
        if (fillSizeRatio < 0.0)
            fillSizeRatio = 0.0;

        // Create array to hold actual sizes in pixels
        crSize[z] = new int[numCr];

        // Assign absolute sizes (must be done before assignPrefMinSize)
        // This is done to calculate absolute cr sizes
        assignAbsoluteSize(z, 0);

        // Assign preferred and minimum sizes (must be done after assignAbsoluteSize)
        // This is done to calculate preferred/minimum cr sizes
        assignPrefMinSize(z, 0, MINIMUM);
        assignPrefMinSize(z, 0, PREFERRED);

        int crPrefMin[] = new int[numCr];

        for (counter = 0; counter < numCr; counter++)
            if ((crSpec[z][counter] == PREFERRED) ||
                    (crSpec[z][counter] == MINIMUM)) {
                crPrefMin[counter] = crSize[z][counter];
            }

        // Find maximum preferred/minimum size of all scaled components
        int numColumn = crSpec[C].length;
        int numRow = crSpec[R].length;
        int numEntry = entryList.length;

        for (int entryCounter = 0; entryCounter < numEntry; entryCounter++) {
            // Get next entry
            Entry entry = entryList[entryCounter];

            // Make sure entry is in valid rows and columns
            if ((entry.cr1[C] < 0) || (entry.cr1[C] >= numColumn) ||
                    (entry.cr2[C] >= numColumn) ||
                    (entry.cr1[R] < 0) || (entry.cr1[R] >= numRow) ||
                    (entry.cr2[R] >= numRow)) {
                // Skip the bad component
                continue;
            }

            // Get preferred/minimum size of current component
            size = prefMinSize[entryCounter];

            //----------------------------------------------------------------------

            // Calculate portion of component that is not absolutely sized
            int scalableSize = (z == C) ? size.width : size.height;

            for (counter = entry.cr1[z]; counter <= entry.cr2[z]; counter++)
                if (crSpec[z][counter] >= 1.0)
                    scalableSize -= crSpec[z][counter];
                else if ((crSpec[z][counter] == PREFERRED) ||
                        (crSpec[z][counter] == MINIMUM)) {
                    scalableSize -= crPrefMin[counter];
                }

            //----------------------------------------------------------------------

            // Determine total percentage of scalable space that the component
            // occupies by adding the relative columns and the fill columns
            double relativeSize = 0.0;

            for (counter = entry.cr1[z]; counter <= entry.cr2[z]; counter++) {
                // Cr is scaled
                if ((crSpec[z][counter] > 0.0) && (crSpec[z][counter] < 1.0))
                    // Add scaled size to relativeWidth
                    relativeSize += crSpec[z][counter];
                    // Cr is fill
                else if ((crSpec[z][counter] == FILL) && (fillSizeRatio != 0.0))
                    // Add fill size to relativeWidth
                    relativeSize += fillSizeRatio;
            }

            // Determine the total scaled size as estimated by this component
            if (relativeSize == 0)
                temp = 0;
            else
                temp = (int) (scalableSize / relativeSize + 0.5);

            //----------------------------------------------------------------------

            // If the container needs to be bigger, make it so
            if (scaledSize < temp)
                scaledSize = temp;
        }

        // totalSize is the scaledSize plus the sum of all absolute sizes and all
        // preferred sizes
        int totalSize = scaledSize;

        for (counter = 0; counter < numCr; counter++)
            // Is the current cr an absolute size
            if (crSpec[z][counter] >= 1.0)
                totalSize += (int) (crSpec[z][counter] + 0.5);
                // Is the current cr a preferred/minimum size
            else if ((crSpec[z][counter] == PREFERRED) ||
                    (crSpec[z][counter] == MINIMUM)) {
                // Add preferred/minimum width
                totalSize += crPrefMin[counter];
            }

        // Compensate for horizontal and vertical gap
        if (numCr > 0)
            totalSize += ((z == C) ? hGap : vGap) * (numCr - 1);

        return totalSize;
    }


    /**
     * Adds the specified component with the specified name to the layout.
     *
     * @param name         indicates entry's position and anchor
     * @param component    component to add
     */

    public void addLayoutComponent(String name, Component component) {
        addLayoutComponent(component, name);
    }



//******************************************************************************
//** java.awt.event.LayoutManager2 methods                                   ***
//******************************************************************************



    /**
     * Adds the specified component with the specified name to the layout.
     *
     * @param component    component to add
     * @param constraint   indicates entry's position and alignment
     */

    public void addLayoutComponent(Component component, Object constraint) {
        if (constraint instanceof String) {
            // Create an entry to associate component with its constraints
            constraint = new TableLayoutConstraints((String) constraint);

            // Add component and constraints to the list
            list.add(new Entry(component, (TableLayoutConstraints) constraint));

            // Indicate that the cell sizes are not known
            dirty = true;
        } else if (constraint instanceof TableLayoutConstraints) {
            // Add component and constraints to the list
            list.add(new Entry(component, (TableLayoutConstraints) constraint));

            // Indicate that the cell sizes are not known
            dirty = true;
        } else if (constraint == null)
            throw new IllegalArgumentException("No constraint for the component");
        else
            throw new IllegalArgumentException
                    ("Cannot accept a constraint of class " + constraint.getClass());
    }


    /**
     * Removes the specified component from the layout.
     *
     * @param component    component being removed
     */

    public void removeLayoutComponent(Component component) {
        // Remove the component
        ListIterator<Entry> iterator = list.listIterator(0);

        while (iterator.hasNext()) {
            Entry entry = iterator.next();

            if (entry.component == component)
                iterator.remove();
        }

        // Indicate that the cell sizes are not known since
        dirty = true;
    }


    /**
     * Returns the maximum dimensions for this layout given the components in the
     * specified target container.
     *
     * @param target the component which needs to be laid out
     *
     * @return unconditionally, a Dimension of Integer.MAX_VALUE by
     *         Integer.MAX_VALUE since TableLayout does not limit the
     *         maximum size of a container
     */

    public Dimension maximumLayoutSize(Container target) {
        return new Dimension(Integer.MAX_VALUE, Integer.MAX_VALUE);
    }


    /**
     * Returns the alignment along the x axis.  This specifies how the component
     * would like to be aligned relative to other components.  The value should be
     * a number between 0 and 1 where 0 represents alignment along the origin, 1 is
     * aligned the furthest away from the origin, 0.5 is centered, etc.
     *
     * @return unconditionally, 0.5
     */

    public float getLayoutAlignmentX(Container parent) {
        return 0.5f;
    }


    /**
     * Returns the alignment along the y axis.  This specifies how the component
     * would like to be aligned relative to other components.  The value should be
     * a number between 0 and 1 where 0 represents alignment along the origin, 1 is
     * aligned the furthest away from the origin, 0.5 is centered, etc.
     *
     * @return unconditionally, 0.5
     */

    public float getLayoutAlignmentY(Container parent) {
        return 0.5f;
    }


    /**
     * Invalidates the layout, indicating that if the layout manager has cached
     * information it should be discarded.
     */

    public void invalidateLayout(Container target) {
        dirty = true;
    }



//******************************************************************************
//*** Inner Class                                                            ***
//******************************************************************************



    // The following inner class is used to bind components to their constraints
    public static class Entry implements Cloneable {
        /** Component bound by the constraints */
        public Component component;

        /** Cell in which the upper-left corner of the component lies */
        public int cr1[];

        /** Cell in which the lower-right corner of the component lies */
        public int cr2[];

        /** Horizontal and vertical alignment */
        public int alignment[];

        /**
         * Constructs an Entry that binds a component to a set of constraints.
         *
         * @param component     component being bound
         * @param constraint    constraints being applied
         */

        public Entry(Component component, TableLayoutConstraints constraint) {
            int cr1[] = {constraint.col1, constraint.row1};
            int cr2[] = {constraint.col2, constraint.row2};
            int alignment[] = {constraint.hAlign, constraint.vAlign};

            this.cr1 = cr1;
            this.cr2 = cr2;
            this.alignment = alignment;
            this.component = component;
        }

        /**
         * Copies this Entry.
         */

        public Entry copy() throws CloneNotSupportedException {
            return (Entry)clone();
        }

        /**
         * Gets the string representation of this Entry.
         *
         * @return a string in the form
         *         "(col1, row1, col2, row2, vAlign, hAlign) component"
         */

        public String toString() {
            TableLayoutConstraints c = new TableLayoutConstraints
                    (cr1[C], cr1[R], cr2[C], cr2[R], alignment[C], alignment[R]);

            return "(" + c + ") " + component;
        }
    }


}